Metal underframe for the table

As good as the table is, without additional elements it is much less functional. The same subframes are very important for the design of the appearance, therefore, you should figure out by what criteria they need to be selected, as well as where which solution is appropriate.

The metal underframe for the table can be either steel or cast iron, aluminum or copper. Variants are also made from brass. Their varieties are adapted to a specific place of application. There are options for a restaurant and bar, cafe, for a country table, as well as an exquisite home interior. There are a number of relatively cheap models on the market that were created on the basis of simple casting technologies.

A cast iron underframe is preferable for a restaurant or bar, as it optimally matches most design approaches and looks elegant in dim lighting. The exhibition specimens are mostly made of aluminum - they are easy to install and dismantle without the expenditure of significant efforts. For a glass table, products made of aluminum and brass are preferable. Cast iron is also suitable, but only for complex colors. Products with chrome plating are reliable and aesthetic.

Metal underframes are very durable. They come in a wide variety of sizes and require only minimal maintenance, even when installed outdoors. Wooden options are too less durable and impractical. When used, they will require significant costs.

Still, solid wood has its advantages. It is much more elegant and natural than any other options. Wood emphasizes the sophistication of the interior. Unfortunately, furniture made from this material can swell when exposed to water. Over time, it deforms and even sags.

The underframe made of carved oak and other precious woods differs little in strength and reliability from steel options. But its important disadvantage is its high cost and insufficient stability. Attempts to use MDF and other inexpensive materials do not lead to good results - the strength will be too low.

Artificial stone is heavy and expensive. Stone structures should only be used for completely exclusive tables. As you can see, there is no particular alternative to metal in the manufacture of the underframe.

The foldable system is attractive in that it saves space in the room. But you must always make sure that the mechanism is reliable enough, otherwise one day you may find yourself in a very unpleasant situation, especially when there is an important gala lunch (dinner) ahead.

The adjustable design allows you to flexibly change the height of the table. It is convenient for a bar, cafe or canteen, as well as for those private customers who are visited by many guests.The reliability of most of the regulating units is quite high, and yet it will be useful to check it once again by reading the accompanying documents, learning the characteristics. Always ask what specific limits you can change the height of the table. Folding underfolds are good where you constantly need to change the number of available places without cluttering up extra space.

It is recommended to use such constructions for:

• quick start of conferences, meetings, meetings;
• organizing a temporary audience;
• holding other large-scale events with the involvement of a large number of people.

For obvious reasons, they are also ideal for field service (catering). A very useful feature that allows for autonomous adjustment of each leg. Thanks to her, you can confidently display furniture even on uneven floors or on the ground.

The type of underframe must not differ from the type of tabletop. The square base is compatible with the rectangular part, but the round options only fit each other. A loft-style table will harmoniously fit into an industrial-style room, even if it is diluted with Scandinavian elements or interspersed with other styles.

The coffee table can be given a wide variety of shapes, although oval solutions are most appropriate. They allow you to save space, and this is perhaps the most important task in most apartments and private houses. The optimal design solution for an industrial interior (loft) is a rough and untreated surface. But this is only an appearance, a specially created design effect. The industrial format requires the furniture to be outwardly durable, evoking the idea of ​​invincibility. Baroque style is easily and elegantly expressed through the application of gilding and the use of other lush decoration elements.

The V-shape of the support is considered one of the most common, because it can be used in the manufacture of tables in a wide variety of designs.

The retractable mechanisms are partially located inside the tsarovy belts (sub-tables). This is where the guides are. If the drawers are installed directly under the table top, it helps to make the table look taller.

The luxurious retro model of the underframe is hardly appropriate in a high-tech interior, but in a Provencal room it is tolerant, and surrounded by classics is graceful and attractive. In nautical rooms, it is a good idea to use ball paint.

The underframe for the countertop is selected in height above the floor. If the furniture is of a standard shape, it should be 71-73 cm. In the case of using a bar table, the minimum value is 1 m, but coffee tables allow you to use structures of only 45-50 cm in height.

There are a variety of models on the market, the dimensions of which are:

• 500 mm (diameter);
• 400x400x720;
• 750x400x720.

There are also a number of other options. The main thing is to choose the size that suits you. Today it is not difficult.

The underframe can also be black, if it is appropriate in a particular interior. The principles for choosing colors are the same as for other furniture. When you need to decorate a room in a classic way, there is nothing better than white tones, and yellow and blue colors are optimal to attract attention. Any warm tone helps to make the space a little wider, and when the windows face north, beige and peach are ideal.

For information on how to make a wooden dining table with a metal base, see the next video.