Shipping bolts on the washing machine: where are they and how to remove them?

In the modern world, a washing machine is installed in almost every home. It is impossible to imagine that once housewives used simple washing machines without additional functions: spin mode, automatic drain-set of water, adjustment of the washing temperature and others.

After purchasing a new washing machine, it is almost always necessary to transport it - even if a store selling large household appliances is located in a neighboring house. And how long, in what conditions and by what means of transport the car drove to the store - the buyer does not know. The packaging for transporting the machine differs from manufacturer to manufacturer. This can be a cardboard box, a foam box, or wood sheathing.

The drum is a moving part suspended on special shock-absorber springs. During the operation of the machine, we observe its rotation and small vibration, due to which the washing process itself takes place. During transportation, the drum must be firmly fixed. Otherwise, he may suffer himself or damage the tank and other adjacent parts.

The shipping bolts may look different, their design is determined by the manufacturer. As a rule, this is the metal hex head bolt itself, as well as various rubber or plastic inserts. The inserts slide over the bolt and ensure the safety of the surfaces around the fastener. Additionally, metal washers, plastic or rubber gaskets can be used.

The shipping bolts are easy to find on the washing machine: they are usually located on the back of the cabinet. Sometimes the location of the bolts on the body is highlighted in a contrasting color.

If the machine is vertically loaded, then additional bolts may be on top. In order to find them, it is necessary to remove the upper decorative panel (cover).

The number of bolts is from 2 to 6. Should carefully read the instructions for the washing machine - in it, in the first paragraphs, it will be indicated: be sure to remove the shipping bolts before starting operation.

From the instructions, you will find out the number of bolts installed, as well as their exact locations. All instructions contain diagrams showing the temporary transport securing devices. It is important to locate and remove all bolts.

You can remove the shipping bolts yourself. If a specialist (plumber) is involved in connecting the washing machine, then he himself will unscrew these bolts, guided by the regulations. If you decide to install and connect the washing machine yourself, follow the instructions. To remove the shipping fasteners, you will need a suitable sized wrench or adjustable wrench. Pliers can be used.

Most of the drum mounting bolts are located on the back of the case. Therefore, they should be removed. before the washing machine finally takes its place in the house, and before it is connected to the water supply and sewage systems.

Additional movement of the machine may be required: to another room or to another floor (in a large house). Only when you finally decide on a place for a new washing machine and move it there, you can start dismantling the mounts.

By unscrewing the transit bolts, be careful not to scratch the case cover. After unscrewing the metal bolts, it is necessary to get and remove all plastic and rubber fasteners. These can be couplings, adapters, inserts. Metal washers are often used. In place of the bolts, holes will remain, sometimes quite large.

Otherwise, dust and moisture will accumulate in the holes, which can lead to malfunctions of the washing machine. Plugs (soft plastic or rubber) are supplied with the machine. Installing them is quite simple: insert them into the holes and press until they lightly click or pop.

The removed transit bolts must be retained. They may be needed if you want to move the machine: in case of moving, delivering it to a repair shop, or to a new owner upon sale. The service life of the washing machine is about 10 years. During this time, you can forget about its proper transportation and throw away (or lose) unnecessary fasteners. If it becomes necessary to transport the machine to another place, new shipping bolts can be purchased at hardware or hardware stores.

Exists "Popular" recommendation, how to transport the washing machine without negative consequences: use foam or foam rubber around the drum to hold it in place. To do this, unscrew the top panel (cover) of the machine to provide access to these mechanisms.Transport the washing machine without standard drum mounts in a horizontal position or in a tilted state. The front panel with the detergent drawer must be facing (or tilted) down.

When asked what happens if you forget to unscrew the shipping bolts before using the washing machine, the answer is unequivocal: nothing good! This is not only strong vibration and grinding at the first start, but also unpleasant consequences in the form of significant breakdowns and the impossibility of further operation. The breakdown can be very serious: it may be necessary to replace the expensive drum itself or other parts. In this case, the washing machine may not fail immediately, but after several washing cycles. And strong vibration and noise can, unknowingly, be attributed to the features of the model.

If you find during the operation of the machine not removed transport bolts, unscrew them immediately. Then call the wizard for diagnostics. Even in the absence of external manifestations of malfunctions, irregularities and malfunctions in internal structures and mechanisms may appear that can (or no longer) can be repaired.

There is nothing difficult in connecting a washing machine with the correct wiring of plumbing equipment, electrical equipment and the correct organization of the water supply and drainage system. You can cope with this on your own, spending about an hour. However, you should never forget about the transport bolts, the dismantling of which is carried out in the first place.

In the next video, you can visually familiarize yourself with the process of removing the shipping bolts.