What can be made from an old washing machine?

If your washing machine breaks down and cannot be repaired, do not despair - the old equipment can serve you for many more years. There is no need to take it to a landfill, because you can always create many unusual devices from the elements of a failed SMA. In our review, we will talk about how you can upgrade your broken washing equipment.

Can get a second life engine, of course, only if it is not burned out, but working. In any household, you can find a use for a drum made of durable metal, as well as doors with impact-resistant glass and even a roomy body. They can be used to make machines and stylish interior decor elements. There is no need to scatter small parts - bearings and springs can come in handy in everyday life.

Most SMA wheels and feet adjustable in length - in the future, you can install a sofa or other home furniture on them in order to then adjust at your discretion. In the household, wires will come in handy, they are often used to repair household appliances, and clamps will most likely be needed for fixing and fastening.

In washing machines counterweights, as a rule, are made of cast iron - if desired, they can always be scrapped. But you can find them and more practical use, for example, use as a press when pickling cabbage and salting bacon.

Thus, most of the parts of the disassembled machine can be used.

Dismantling the washing machine involves several steps.

• Detaching the top panel... To do this, unscrew the screws with a Phillips screwdriver, then grab the back panel with one hand, slightly lift it and move it back with the other hand at this time. As soon as you feel that the panel is no longer fixed, you can freely remove it.

• Disconnecting the control unit... First you need to remove the container for the washing powder, after which you can start dismantling the distributor box. To do this, unscrew all the screws with your right hand, grab the control unit, and with the left pull the panel at an angle of 90 degrees. As a result of these manipulations, the panel will detach from the right fastener and it will be possible to rotate it 180 degrees, and then hang it on the sidewall of the MCA.

• Removing the service panel... This can be done with a plastic or wooden crowbar. The extraction of the center panel occurs along with the window. At the same stage, you can pull out the connector that performs the function of locking the door.

• After that it remains only to remove the back wall, heating element, and last but not least, the drum. It is removed from the machine along with the motor.

The engine of the washing machine can be used to create many useful household items.

This is the simplest thing that can be made from an SMA engine. It is fixed on a metal or wooden base, it can be fixed with brackets or clamps. For to prevent vibration, a cardboard or rubber is placed between the motor and the base... After that, you can make an adapter and connect it to the mains.

If your machine had a cylindrical shape, then you can transform it into a concrete mixer. To do this, you need to perform a few simple steps:

Carefully remove the CMA activator, and fix the blades in its place - they will later be responsible for mixing concrete. It is best to make them from sheet metal, having previously cut a hole of the desired shape in it and welded it - they should be U-shaped and have a thickness of 5 mm.

Install a gearbox instead of a belt drive - this way you can reduce the number of revolutions.

Of course, it will be quite difficult to make a new grass cutter "from scratch" without special skills, but it is quite possible to use a serviceable motor of an automatic machine in an old mower.

From the operating engine of the washing machine, you can make a potter's wheel, on which you can always make creative clay crafts.

A lot of interesting things can also be created from the drum.

If you like to eat smoked fish or meat, then you should definitely use the drum of the broken machine as a base for your smokehouse. It should be wrapped with a sheet of metal in order to close all the holes.... After that, it remains only to cut through the door, and drill a hole for the smoke at the top of the tank. Your smoker is ready - all you need to do is secure the metal grate.

For kebab lovers, you can make a brazier from a machine drum. It will take almost no effort. First you need to attach legs to the container - small-diameter pipes are suitable for this, they will become a good support.

The grill can be made in the same way. The only difference in this case is the small motor, which is installed in the side cover of the grill.

For the owners of a large courtyard, a feather removal machine will certainly be useful. This device allows you to quickly and effectively pluck poultry.

For the manufacture of equipment, it is necessary to make a steel disc in such a way that its diameter is 1-1.5 cm less than the diameter of the tank, and its thickness is about 3 mm. After that, make several holes in the disk, as well as on the sides, in 3 cm increments. Carefully insert feather fingers into the formed holes.

The owners of the summer cottage can build an outdoor washbasin from the tank of the washing machine.

Many interesting elements of interior decor can be made from various parts of the washing machine.

• Bath window... It is equipped with a sealed SMA window, for this you just need to cut a corresponding hole in the frame and fix the door in it.
• Chandelier... You can make a techno chandelier from the drum of a small washing machine. To do this, you just need to fix the structure, connect it to the wiring, add a cartridge and screw in a light bulb.
• Table... The drum can become the basis for the design of a stylish modern table, which can literally transform the design of a room before our eyes. All that is needed for this is to try to fix the steel rods to the elements of the old machine and fix the glass tabletop. An effective solution will be the illumination in the drum. Similarly, you can make a chair, ottoman or cabinet.
• Firebox... If you attach the legs to the drum, you can get a great place for firewood. Such a device will become indispensable for owners of a fireplace or a Russian stove in the house.
• Look pretty interesting hangers from the details of the old AGR.

An old machine can be a source of inspiration for garden design. So, it will make an excellent flowerpot flower bed or a restrictor for the growth of small shrubs. For this purpose, you can take both the drum and the body of the machine.

A stylish garden trolley will turn out from the body of the washing unit. To do this, fix small wheels on the tips of the handles, and equip the back with a support. This trolley can be used to transport small loads, as well as one of the varieties of decorative pots.

Any washing machine can be used to design a miniature well - it, in turn, will become either a stylish element of garden design, or will be used as entertainment for children.

A broken washing machine is often used to take care of our smaller brothers. If you attach the hatch door to the doghouse, then you can protect the pet from the cold and uninvited guests. However, be sure to make small holes in your dog's house, otherwise the animal may suffocate.

Well, if you dream of a warm shower, then take a stainless steel tank, wrap it with any insulating material so that the liquid heats up faster, and enjoy the summer rain.

Ceiling and floor lamps made of drums look very impressive.

Coffee tables based on a tank look stylish and creative in a modern interior, while the tabletop can be built from glass, ceramics, wood, epoxy resin and other decorative materials.

The open barbecue area, as well as houses and apartments with a real fireplace, will be decorated with a beautiful firebox.

In garden design, SMA details have found their application as a basis for making pots. Most often, a drum is used - you can put a pot of flowers in it or cover it with earth and plant decorative annuals.

On summer evenings, outdoor hearths and braziers will create a special coziness in the courtyard.

How to make a brazier from a washing machine drum, see the next video.