Samsung washing machine does not drain water: causes and solutions

Samsung washing machines are renowned for their impeccable quality and durability. This technique is very popular. Many consumers choose it for purchase. However, high quality workmanship does not protect Samsung units from possible malfunctions. In this article, we will learn what to do if the washing machine of this famous brand does not drain the water.

Samsung washing machine is the choice of many buyers. This high-quality machine boasts excellent performance and the highest build quality.

Before you panic and rush to disassemble the machine in search of a solution to the problem, you need to figure out what could cause it.

• Clogged filter system. Various small objects can get into the filter components of the machine structure during washing. These may be little things that the household forgot to take out of the pockets of their clothes. Due to the indicated blockages, the technician cannot drain the water. In this case, there is nothing left but to clean the filter.

• The drain hose is blocked. A common phenomenon that leads to the inability to drain water from the tank of a Samsung washing machine. Here, as in the previous situation, the only way out is to clean the clogged parts.

• Incorrect pump operation... This important element of the washing machine consists of parts such as a pipe, a plastic impeller, and an electric motor. The pump may stop working due to the fact that either threads or long hair are wrapped around the shaft. For these reasons, the discharge of water into the sewer can be partially blocked.

• Defective control module. Burned-out components of microcircuits or a failure in the firmware of the module can lead to its inoperability. This may cause household appliances to stop pumping water from the tank. In such a situation, only the repair or replacement of the programmer will be salvation.

• Incorrect hose installation. With prolonged use, the pump power is inevitably reduced. As a rule, even the reduced indicators are enough for high-quality pumping of liquid from the tank of the device using a hose. The length of the latter should be at least 1.5 m. If you use a hose that is too long, the drain pump simply will not be able to pump out the liquid to the end.

• Faulty electrical wiring. A Samsung washing machine may stop draining for this very good reason. If you initially install household appliances without observing all the rules, too strong vibration may be generated during its operation. Because of this, malfunctions regarding the electrical wiring may appear. As a result, this will result in a failure of the liquid pumping function.

It is possible to find the malfunction by various methods. Experts recommend do not waste time and resort to the most optimal - the elimination of consumer mistakes, since in most cases it is they who are the main cause of malfunctions in the operation of the Samsung washing machine.

Among the most common mistakes are the following.

• The technique "freezes" during operation, because the drum is overloaded. The machine just can't handle the load.
• Spin does not take place because disabled on the dashboard.
• Short-term electronics failure may affect the water drain function.

If the problem is not in the listed errors, it is worth looking for the cause in the internal elements.

• Check the drain hose and pump for blockages. Investigate the condition of all fittings that lead to the cistern.

• If you find no blockage in the drain system, check the pump. Be sure to investigate both the mechanical and electrical parts.

• Examine the pressure switch if the pump isn't the problem. To do this, remove it and check it with a multimeter. This is the only way to determine if the specified element is working correctly.

• If there are no errors in the pressure switch, examine the wiring of household appliances. The drain often does not work if the electrical wiring is short-circuited or cut off at the control module.

Repair of a faulty machine depends on the reason why the water drain from the tank stopped. Consider how to act correctly using the example of replacing a faulty pump and cleaning the pipe. A pump break is considered one of the most serious reasons why the pumping of water from the tank of the machine has stopped. Usually, in such situations, nothing remains but replace the defective part.

Let's consider in stages how you can do it yourself.

• At first carefully remove the drain assembly of the machine.
• Detach from the drain assembly drain pump.
• Neatly separate the wires from the pump that fit to it. In the place where the previous faulty pump was located, install a new part that is suitable for your model of Samsung typewriter.
• Connect all required wires to the pump you just installed.
• Connect the clipper to the mains and carry out a test test. If the technician still does not drain the water, it is better to contact the service department.

If you have checked the filter and it is not the case, it is worth examining the pipe. Very often, the reason for the lack of water drainage lies precisely in this detail. It is worth checking if the outlet of the washing machine is working.

• To get to the nozzle, you need unscrew the bolts holding and securing the drain assemblies.
• Further it is necessary get the nozzle of the machine itself. You will need to carefully remove the retaining clamp.
• In the pipe you can see water to be drained.
• With light compression, it will be clear if this part is clogged or not.... If you feel that there is still a blockage in the pipe that prevents the fluid from flowing out of the tank, you will need to get rid of it without fail.
• After completing these simple steps, put the nipple back into place.

Now let's look at how to repair the equipment, if the point is in such a detail as a pressure switch.

• Necessary remove the top cover of the unit.
• Above, under the cover of the machine, you can see a round plastic part. An electrical sensor is attached to it - pressure switch.
• The found part is necessary check for proper operation.
• If it turns out that the pressure switch is not working properly, it must be carefully replaced by putting a new part in its place. This is very easy to do, and a fresh element will cost no more than $ 20.

If a malfunction occurs due to a clogged filter, then proceed in this order.

• Before removing the filter from the machine, prepare capacious container and a few unnecessary rags.
• When you unscrew the filter piece, water will pour out of the hole. To flood the floors in the room, place free reservoirs in advance and spread rags everywhere.
• Unscrew the spare part, carefully clean it of all debris.
• Get out all the dirt and foreign objects from the hole to which the filter element is attached.
• Disconnect the clipper from the sewer and plumbing system. Move the tech to the center of the room.
• Get out powder compartment.
• Lay the technique to one sideto get to the desired connections through the bottom.
• Then you can get to the drain pipe and clean it also along with the wiringif you see dirt there.

At the same time, along with the rest of the details, you can check the condition of the pump.

If the washing machine itself does not cope with the function of draining the liquid, you have to resort to forced pumping. It can be done in a variety of ways. Let's take a closer look at how this can be done using one of the simplest examples.

• Neatly unscrew the filter of the Samsung washing machine. It is located at the bottom of the unit. Prepare capacious containers in advance into which water from the device will be poured.
• Carefully and slowly tilt the washing machine towards the filter cartridge... Wait until all the liquid has drained.
• If you drain the water from the machine using a filter device, there is no way, it will be required with the utmost care clean another important part - the pipe. It will need to be slightly stirred in order for the direct drainage of the liquid to begin.
• If water is not pumped out of the Samsung washing machine for any other reason, then you can resort to the emergency drain with a hose. This is a popular way. The hose will need to be lowered to the very bottom of the tank of the device, create an outflow of water and remove it from there.

Before finding out what is the reason for the lack of drainage or repairing the equipment yourself, it is worth listening to some tips and tricks.

• If your machine is more than 6-7 years old and it makes noise during spinning, this signals about a pump breakdown.
• Try restarting your car before looking for the cause of breakdowns. Often the problem goes away after that.
• In search of the cause of the breakdown it is recommended to start simple, and then gradually you can move on to the complex.
• Checking the operation of the pump, evaluate the appearance of wiring and terminals, which go to the drain pump. The wire could burn out or jump out, provoking a lot of problems.
• If you are afraid to make a serious mistake while repairing a branded machine, or if it is still under warranty, then it is better not to take independent actions. Contact the service center (if still under warranty) or call a professional repairer.

The following video provides a step-by-step overview of the pump replacement process on the Samsung WF6528N7W washing machine.