How to properly disassemble a Samsung washing machine?

Modern models of Samsung washing machines Are durable, computer-controlled devices with maximum automation. When assembling them, manufacturers use high-quality materials and equipment, but depending on the operating conditions, the device may fail over time. Despite its versatility, the design of the machine is relatively simple - all components and assemblies are replaceable. If you study the instructions on how to properly disassemble the washing machine, you can carry out repairs and adjustments yourself without calling a specialist.

Samsung washing machines perform high-quality and gentle washing. The configuration and inner surface of the drum, as well as a special rotation cycle, protect the laundry from damage, preserving the structure of the fabric and the appearance of the product. This quality of washing ensures the coherence of work and the accuracy of the arrangement of mechanisms. That's why when disassembling, it is important to take into account the location and number of all parts, so that later they can be correctly installed or replaced.

Regardless of the model, Samsung washing machines consist of the following basic elements:

• 4 inner panels - there are front, rear and basement options;
• tray for household chemicals - washing powder, air conditioner;
• software panel - included in all modern models;
• prefabricated structure from a drum and a tank with couplings;
• special weighting agents for the tank;
• electric engine and drive belts;
• hydraulic water pump;
• electric heater - Heating element.

An important mechanism in the design of an automatic washing machine is pressure switch. The device detects the presence and level of water in the tank and controls its supply. During washing, the pressure switch transmits electrical signals, and the automation takes water in accordance with the mode set on the display. This appliance is one of the main elements in the design of the washing machine, since in the event of a breakdown, further operation of the equipment is impossible.

Preparation, like the disassembly process itself, will depend on the type of washing machine. Among modern household appliances, two types of designs are distinguished: with top or front loading of linen. For example, to eliminate the most frequent breakdown - replacing the drive belt - in a front-loading washer, it is enough to unscrew the fastening bolts and remove the back panel. Therefore, at the first stage of preparation, it is necessary to study the technical documentation: the electrical diagram and the location of components and mechanisms in a specific model of the Samsung washing machine.

Before proceeding with disassembly, you need to clear the space and prepare a place for the dismantled parts and parts. It is necessary to disconnect the device from the mains, as well as from other communications: water supply and drain. The water supply hose is screwed to the pipe coming out of the body with a union nut - when unscrewing it it is important not to lose the inner lining... For the time being, you can not unscrew the drain hose, but only remove it from the outlet of the sewer drain pipe.

Selecting tools for disassembling the washing machine, do not use interchangeable or improvised devices. Samsung home appliances are equipped not only with sensitive mechanical devices, but also with various computer control boards. For example, some fasteners are made of soft metal, and the notches can easily be damaged with an inappropriate screwdriver size or configuration. To properly disassemble your Samsung washing machine, you will need tools:

• large curved pliers - platypuses;
• dielectric insulated pliers;
• medium-sized ordinary cutters;
• pliers or nippers for self-clamping clamps;
• Phillips and slotted screwdrivers;
• open-end wrenches in sizes 8, 9 and 19;
• socket wrenches with a set of heads.

In household appliances with top loading, a special service key may still be required to replace bearing assemblies (calipers) and disassemble threaded connections. The tool is also used when it is necessary to gain full access to the inside of the tank in order to remove foreign objects from it: buttons, coins, runners that have come off during washing. First, you need to unscrew the drum axle fixing bolt, and then dismantle the caliper itself, turning it towards the "Open" indicator.

The list of auxiliary materials mainly depends on the type of repair of the washing machine. But in any case, in order to carry out a neat disassembly and not damage the mechanisms, it is recommended to use special liquid WD-40... During reassembly, it is advisable to immediately carry out preventive work - lubricate the moving elements and joints, for this you need to purchase the appropriate lubricant. Also, during disassembly, you may need the following related materials:

• silicone sealant;
• colored markers;
• CV joint grease;
• multimeter.

In rare cases, when dismantling a tank or drum, it is necessary to cut individual elements, that is you will need a hacksaw for metal with fine teeth, a drill and a long drill.

Most modern Samsung home washing machines are front-loading. The vertical version is most often found among equipment designed for large volumes of linen. Front-end machines are labeled WF, vertical ones - WW, WD symbols indicate the presence of an automatic clothes dryer - they are available in a number of models of both types of equipment, for example, from the Bio Compact series.

The first step is to remove all external and non-fixed elements of the fasteners: disconnect the hoses, remove the container for washing powder and household chemicals. If a complete disassembly is planned, it is also recommended remove the door first, especially in the Diamond series models. To do this, you need to unscrew the two mounting bolts - in the future, it will help to quickly dismantle and pull out the drum. Further, the disassembly of the front-end machine is carried out in accordance with a certain order.

• Using a Phillips screwdriver, the fasteners are unscrewed, and the top panel or cover is removed. Being careful, it must be gently pulled towards you in order to open it and not damage the plastic elements.
• Pressing your finger on the central part, free the recess of the detergent dispenser, if the model of the machine does not provide for its dismantling without removing the top cover.
• Remove the control unit or moduleby unscrewing the bolts and disconnecting it from the adjacent mechanisms. Disconnect the connectors and associated electrical cables - remove their plugs from the special grooves on the unit body.
• Remove the service panel located at the lower front of the unit. The panel is firmly seated, so after unscrewing the fasteners, you may have to pry it off with the flat end of a screwdriver.
• In some models, such as WF S861, in addition to wires, the panel is connected to the body with a special cuff with a rubber base. When dismantling the panel, the collar should be carefully pry off with a screwdriver, and then pulled out of the grooves.
• Remove the counterweights installed on both sides of the chassis... They are made in the form of small concrete blocks and are necessary so that the washing machine makes less noise during operation, does not vibrate so much during spinning.
• Dismantle the electric heating device - heating element. It is located at the bottom of the back side of the tank. It is fixed in the center with a nut - it must be unscrewed first, then press on the pin located below and, prying the heating element with a screwdriver, carefully remove it. It is even allowed to knock slightly with a hammer. Dismantle the drum - also secured with a central nut.
• Loosen the drive belt fixing nut, pull it to the pulley and remove... Remove all wires inside the tank (after marking them), unscrew the fixing elements, dismantle and take out the tank.
• Detach the center panel, which is fixed to the body with 4 bolts.

Finally, the hatch lock connector is disconnected separately, it must be freed from the wires and, by unscrewing the fasteners, disconnected from the case. If necessary the rear panel of the unit is also removed - you will need to unscrew the tie bolt and some mounting screws.

Thanks to the simple design and more convenient access to parts and mechanisms, it is easier to disassemble the top-loading washing machine. A simpler set of functions and a device, I suppose, and a smaller number of possible breakdowns, most often the owners disassemble the car for the following reasons:

• a sharp decrease in the speed of rotation of the drum during spinning;
• loss of balance of the drum and its spontaneous opening;
• the formation of corrosion on metal blocks;
• depletion or failure of bearings.

Disassembly process of Samsung top loading washing machine:

• unscrew the side screws - can be located on both sides;
• move and pull the block towards you;
• disconnect all wires and electrical cables;
• dismantle the machine panel.

This is a general way to disassemble top-loading household appliances, the components described below are disassembled separately. The disassembly method will depend on the model of the washing machine, but the differences are usually small. - all parts and elements are fixed using standard elements.

The assembly is carried out in the reverse order, it is important that all parts are installed in their place and in exactly the same position relative to the body. Modern Samsung washing machines are fully automated, therefore accurate positioning of the parts is very important for correct operation. For convenience, and also to avoid mistakes, you can mark the initial placement of elements with colored markers: wires, cables, installation height of the mechanism.

An equally reliable option is to photograph the location of parts during the disassembly process, this is especially convenient when replacing electrical devices. Also, to be sure during reassembly, it is recommended to check the diagram that comes with the kit, since different models may have significant differences in the design and installation method of the main elements.

How to properly disassemble your Samsung washing machine, see below.