Why won't my Samsung washing machine turn on and how to fix it?

An automatic washing machine is an integral part of a modern living space. Many manufacturers are engaged in the production of these household appliances, but among the wide brand assortment for many years, the Samsung trademark remains the sales leader, whose products are of high quality, reliability and a long period of operation. Despite the positive characteristics of the products, users often encounter various types of minor breakdowns, the most common of which is the inability to turn on the device.

Both experienced and novice housewives face the problem of the impossibility of turning on the automatic washing machine. Often, after loading the laundry and filling the detergent container, it turns out that the Samsung washing machine not only does not start and does not work, but also does not turn on.

Experts recommend paying attention to the following list of faults:

• lack of electricity in the apartment;
• breakdown of the outlet from which the device is powered;
• rupture of extension wires if used;
• lack of water in the centralized water supply system;
• incorrect connection of the water supply system;
• switching on the system of protective shutdown of the power supply in case of voltage drops;
• lack of hermetic closing of the hatch;
• sharp and repeated voltage drops;
• the presence of a weak water pressure;
• incorrect connection of the entire machine system.

Latest models of clippers are equipped with a special display that gives information about possible malfunctions and breakdowns.

If, after a visual inspection, no concomitant reasons were identified, then we can conclude that the impossibility of turning on the device is associated with technical problems, for the detection of which it is imperative to purchase a multimeter, a set of screwdrivers and wrenches.

A list of the most likely problems and how to identify them.

• Any kinks, breaks or breaks in the cord and plug - checking the elements with a tester set in the "buzzer" mode, visual inspection of the integrity of the pins on the plug.
• Breakage of the hatch closing mechanism - checking the blockage with a multimeter. A sign of a breakdown is the lack of voltage on the device after starting the program.
• Failure of the control module - lack of communication between the control panel and the module.
• Simultaneous activation of all indicators - a sign of a wiring malfunction, a broken software module, or a bad contact connection.
• Breakage of the power button - checking the element with a multimeter. A sign of a breakdown is the absence of a signal when ringing.
• Malfunction of the EMI filtering device - dismantling and checking with a tester, which is set to voltage mode
• Electronic module malfunction - checking the device with a tester for the presence of a signal.
• Dirty filter - visual inspection of the drain hose located on the rear wall.

Often users are faced with the problem of turning off the machine a few seconds after the start of the wash. This problem is caused by the following factors:

• bookmarking a large amount of laundry;
• incorrect choice of the washing mode;
• regular use of low-quality powder;
• uneven distribution of items inside the drum.

These problems can be avoided by careful study of the instructions and strict adherence to all recommendations of the manufacturer.

However, it is impossible to identify these problems on your own. Only specialists of service centers can restore the device to work. Particular attention must be paid to the acquisition of new parts. Spare parts can only be bought in specialized stores, and their brand and serial number must be the same as the old element.

Having basic skills in repairing household appliances, you can fix some types of breakdowns yourself. After determining the type of malfunction it is necessary to purchase new parts, special electrical tape and carefully study the device diagram.

If the "Start" button is stuck or dirty, it is necessary to disassemble the front panel, remove the element and clean it from dirt and dust using a knife and wet wipes. At the end of the purification, the work must be done in the reverse order. If the cause of the button breakdown is a broken wire, then a new part should be installed, the number and series of which must fully correspond to the type and model of the machine used. In order to avoid inaccuracies during assembly, experts recommend taking photographs of the disassembly. You can check the performance of the installed part using a tester.

To repair the controller, it is necessary to disconnect it and disassemble it into small elements. The process of repairing a programmed control system consists of the following stages:

• disassembling the front part and opening access to the device;
• dismantling of the device and its complete disassembly;
• removing the board by pressing the side latches;
• checking the device for the presence of burning spots;
• soldering of all necessary sections;
• measurement of resistance on contacts;
• cleaning the central gear from foreign debris;
• dismantling of gears and cores with their subsequent processing with alcohol-containing solutions;
• checking the engine winding and, if necessary, completely replacing the wire.

To restore the functionality of the blocking device after its long-term operation it is necessary to completely disassemble it. Deformation of the element and loss of its functionality occurs as a result of sharp temperature fluctuations. Experts identify the following stages of repair:

• dismantling the cuff clamp using a screwdriver and pliers;
• removing the lock case by unscrewing the fixing screws;
• disconnecting connectors from the old element;
• connecting connectors to a new part;
• fixing a new part with screws;
• installation of the cuff and fixing it with a clamp.

If the lock breaks with the door closed it is necessary to disassemble the top panel of the machine and press the latch with your hand... The further sequence of work is similar to the standard replacement of the lock.

Broken noise filter is an unpleasant situation that cannot be repaired... To restore the performance of this element, the part must be dismantled and a new one installed. In order to make sure that the device is absolutely unusable, a number of manipulations should be carried out:

• disconnecting the device from the power supply;
• dismantling the upper part of the body;
• checking the filter with a multimeter.

The device is dismantled by unscrewing the bolts and disconnecting the connectors from the old device and then connecting to the new one. An important condition for a quality repair is the installation of new parts that fully correspond to the type and model of the machine. It is strictly forbidden to install elements of other brands.

The reason for the impossibility of using the machine may be a breakdown of the electric motor, with the help of which the drum rotates throughout the entire washing cycle. In order to check the operation of the device, it is necessary to dismantle the rear panel, remove the drive belt and restart it. If this manipulation does not bring results, then it is better to take the machine to a workshop, where specialists will install a new element.

When detecting deformed electrical wires it is necessary to completely replace them and use a tester to check the quality of the installation. Recommended together with electrical wires replace the plug as well.

The life of a modern person is inextricably linked with the work of household appliances, on which the speed and quality of doing household chores depends. One of the indispensable household appliances is an automatic washing machine, the breakdown of which can provoke clutter in any living space. Experts identify a huge number of types of breakdowns that can provoke the inability to turn on the unit. Despite the complexity of the design, most problems can be solved on their own with even minimal experience in repairing household appliances. To solve more complex issues, it is better to call a master or take the device to a specialized workshop.

To repair the module of the Samsung WF-R862 washing machine, see below.