Pump for Samsung washing machine: appointment and repair

The drain pump is an important part of the washing machine, which is responsible for the elimination of dirty water after the washing process. If this part breaks down, then it will be impossible to use the unit, so each owner should monitor its operation and repair it in a timely manner.

Samsung washing machine pump includes several parts:

• low-power electric motor with high speed;
• an impeller that is mounted on the rotor and scroll shaft.

The power of the pump is usually from 30 to 40 W, the number of revolutions of its impeller is from 2, 5 to 3 thousand revolutions per minute. The latter is driven by an asynchronous motor. Water pumps for Samsung technology have a similar structure, the most popular models are the following.

1. DC90-11110K (MAINOX) - this copy is versatile, as it is suitable for a large number of models of washing machines.
2. Askoll. The pump can be mounted with 3 screws. It is made from high quality plastic.
3. Samsung 30-40 W DC31-00030A characterized by the presence of separate terminals. The device is considered suitable for budget units.
4. DC31-00030A Is the original model from Samsung. It is characterized by high reliability and long service life. You can buy this product exclusively at the service center.

Guide units are usually located at the bottom of washing units. In a Samsung typewriter, it is located at the bottom, with access through the bottom. To get to the pump, you need an open-end wrench and a flat, as well as a Phillips screwdriver. Prepare a container for collecting liquid in advance.

Before starting to dismantle the pump, it is worth draining all the water and cleaning the filter.

The unit is capable of working properly and without interruption only if the washing machine pump is well-functioning. The main purpose of the element can be called the removal of contaminated water from the tank of the unit. The full cycle of washing the laundry depends on the quality of the functioning of this unit, since the pump takes part in each operation mode. The pump is actively involved in washing, rinsing, wringing and drying fabrics.

Due to the need to periodically collect and drain water, the pump is exposed to high stress.

If the Samsung washing machine is constantly used, then over time there will come a moment when it will not turn on. The cause of the problem may be hidden in the water pump, which will need to be removed. That's why it is advisable for each owner of the unit to know how to check and change the pump, as well as clean and replace the filter.

In the case when an unusual crackle of the unit is heard, you need to try to disassemble it. To carry out this procedure, it is worth knowing the device of the technique, the nuances of the connection, only then it will turn out to repair the case or correct the situation when the impeller flies.

Depending on the washing mode, the pump can be switched on and off several times. Due to the high load, this element may fail. Samsung equipment pump malfunctions include the following:

• frequent connection of thermal protection on the electric motor winding;
• a clogged impeller, which often causes interruptions in operation;
• impeller blades broken by mechanical impact;
• worn out bushing, which is located on the motor shaft;
• scrolling and falling out of the impeller;
• the occurrence of short circuits;
• breakage of turns that are located on the motor.

Each of the above breakdowns can become the basis for repairing the pump. It is often recommended to carry out repair procedures if minor damage is found, for example, debris entering the impeller, minor damage to the blade. All other problems require replacing the pump in the washing machine.

Since the pump is located in the lower half of the machine, under the tank, you can get to it through the bottom or after dismantling the front panel. The replacement of the pump in Samsung equipment must be carried out through the bottom part.

Dismantling the pump includes the following activities:

• disconnecting the machine from the electricity network;
• shutting off the water before performing the procedures;
• neat laying of the machine on the side - so that the pump is located on top;
• freeing the bottom of the equipment from the protective panel - for this, the latch fasteners are removed;
• dismantling of the protective casing;
• unscrewing the knot screws that are near the valve;
• carefully pulling out the pump;
• disconnecting the power supply wires of the pump;
• loosening the clamps that secure the hoses that are located above the prepared container;
• detaching the snail, if any.

The assembly of the unit should be carried out in the reverse order.... The process of replacing the technical unit of a Samsung washing machine does not take long. You can do all the work with your own hands or by contacting a specialist. According to the advice of professionals, when replacing the pump, it is worth using original parts, since others may not only fail to eliminate the malfunction, but also cause irreparable damage to the machine.

In order for the pump to work for a long time and without interruptions, it is necessary to regularly monitor its condition and follow these recommendations:

• before washing, you need to check all pockets in clothes to exclude the entry of various objects into the pump;
• use only high-quality special detergents that contain anti-scale additives;
• install a filter on the water supply system, which will limit the penetration of rust particles into the unit;
• it is recommended to soak before washing excessively soiled items.

The washing machine pump is the heart of the unit, which determines the quality of washing, rinsing and spinning. All Samsung owners should remember that as soon as the car starts to work worse or there are noticeable signs of breakdown, you need to immediately start repairing.

Samsung washing machine pump repair is presented in the video below.