Washing machine door repair

The washing machine has long ceased to be something amazing. It is found in almost every home. People are used to using it, thereby simplifying the inevitable household chores. However, such a technique, despite its reliability and functionality, can be subject to all sorts of breakdowns. In this article, we will learn what to do if the problem touches the door of the device.

Even the highest quality and most reliable devices can break. A variety of components are susceptible to breakdowns. Often it is necessary to repair the hatch door of the equipment.

Consider what problems most often arise with this important part of the unit.

• If you slam the hatch door carelessly, you can break the glass.
• Often the latch of the part in question breaks - in most cases it gets jammed when the door is closed.
• Plastic hinge supports may break.
• The door handle comes off.

To repair the hatch door of a typewriter, you will need good screwdriver. With its help, you will be able to detach all the necessary units, as well as tighten the detachable parts and fragments of the unit. It is worth clarifying here ideal type of applied bits. Imported models of washing machines in many cases use, in addition to simple cross-type, asterisks of various diameters, as well as curly profiles. Keep them handy. You may need to stock up on special bit extenders.

A device whose hatch door is broken can be repaired by yourself. Usually, there is nothing supernatural in carrying out such work. Consider how you can "bring back to life" a damaged hatch door with your own hands in case of various breakdowns.

If the sunroof locking device stops working unexpectedly, it may mean that it is heavily clogged. You will need to disassemble the element and see if there are any obstacles. If there are any, then the part must be cleaned. There are times when the UBL stops functioning normally due to overheating. With such a problem, it will not be possible to restore the damaged part.

To remove the old and damaged device, and then install a new spare part in its place, you need to use 2 screwdrivers: slotted and Phillips. The procedure will be as follows.

• Neatly pry the clamp slotted screwdriver and take it off.
• Remove part of the cuff in the area of ​​the fastening of the lock. Do this carefully so as not to damage any part.
• Unscrew a couple of screwswhich function as interlocking parts.
• Take the element you need out of the structure with your hand and pull off the chip.
• Then you can install a new UBLby leading it into the interior of the household appliance. Tighten the fixing screws securely.
• Return the cuff to its original place.
• Secure the cuff using 2 screwdrivers... If all steps have been performed correctly, all parts should work properly.

If the door of the hatch of the car breaks down, first of all check the condition of the lock. The fact that the problem lies in this detail may be indicated by the absence of a characteristic clicking sound at the time of closing.Notches may appear on the lever that goes into the hole. It is because of them that the device runs the risk of ceasing to close normally. You will need to carefully unscrew the door and put it on a flat surface. It is better to prepare a free table for this. Remove the chipping with a regular file.

It remains to reinstall the door.

If the latch is badly deformed, it is easier to replace it with a new one than trying to fix it. Such a procedure can take a lot of time - there are no guarantees that the work will be effective. It is better to spend a little money and find a new serviceable part of a suitable modification.

If the glass part in the door is removable, then you can order a new one and install it in the right place without any problems. This is the easiest way out of the situation. If there is no way to get the glass out of the door, you will have to resort to repairing the damaged part of the machine. To do this, you need to prepare an epoxy or polyester resin.

Glue the polyethylene to the front half of the glass with tape. Try not to leave a single gap. Cover the damaged area with a special reinforcing tape, which is usually used for plastering. Prepare the resin: mix the base and hardener in the indicated proportions.

Gently pour the mixture into the damaged area and wait for the composition to polymerize. After a day, you can remove the film. Remove any remaining smudges using a sheet of sandpaper. If you did everything correctly, the glass will look like new.

Even in the highest quality and most reliable washing machines, plastic inevitably deteriorates and wears out over time, especially if you use the technique with neglect. In the event of a breakdown of the supporting elements, the hatch may not fit tightly, thereby provoking the risk of flooding.

If you notice that the plastic part is deteriorating, remove it and fix the damaged part with a vise. The diameter of the nail should be 4 mm. File it to the required length, if necessary. Drill a 3.8 mm through hole in the support. Hold the nail with pliers and heat to 180 degrees. Next, insert its made hole and wait 3 minutes until the fasteners cool down. After that, it remains only to assemble the sash back and put it in its original place.

Usually the handle on the door is made of plastic, so it is not possible to repair it at home... To replace the damaged part, you will have to disassemble the existing structure: you need to remove the hatch door, unscrew the screws that hold the plastic rims. Then you can install a new suitable handle.

If you forcefully press on the hatch door, you can bend or completely break the retaining hinge. Also, the cause of this problem can be initially incorrect installation of the device, when it vibrates strongly and "trembles" during washing.

Look at and evaluate the scale of the skew. If possible, adjust the position of the hinge by slightly tightening the bolts. If you notice that the breakdown is more serious - if the bearings and sash finish are hit, you will have to change the hinge.

• First you need to remove the door from the washing machine.
• Next, you need to unscrew all the connecting screws and disassemble the door.
• Detach the decorative flanges and then remove the glass. If the plastic parts of the hatch are damaged, they can also be replaced with new ones.
• In most situations, the hinge bearings and pivot are subject to failure. The listed parts will need to be removed from the device and replaced.
• Assembly must be done upside-down.

If you did everything correctly, and the hatch door does not lock, this means that the point is the fixing hook. He cannot get into the hole of the lock. This could be due to misalignment or heavy wear on the iron rod, which is responsible for locking the tongue in the correct position. The tongue itself can also be damaged.

To cope with such malfunctions on your own, you will need to disassemble the hatch door using the above method and see the extent of the damage. If the stem is slightly bent or popped out of the retaining groove, it is best to carefully tweak the part and fix it in the correct place. Be sure to install a new stem if it breaks. After completing such repairs, you will see that the tongue should start working correctly.

If the hook responsible for fixing breaks in the lock device of the washing machine, it is better to completely change the handle to a new one.

If you are afraid to carry out independent repair work, even despite their simplicity, it is better to call experienced repairmen. Specialists will quickly fix the faulty door.

In the next video, you will learn how to open a washing machine and replace a broken handle.