Whirlpool washing machine error codes: description, causes, elimination
In the operation of the washing machine, like any other household appliance and equipment, various malfunctions may occur. Today, one of the leading manufacturers of washing machines is Whirlpool, whose products are characterized by reliability and durability. But even with such high-quality products, malfunctions occur.
A great advantage of Whirlpool washing appliances is that in case of a problem, the built-in system instantly detects it and informs the user. All errors and failures are coded, which means that each of them is indicated by a specific code, the decoding of which must be known. This knowledge will help to fix the problem in the future.
Decoding and causes of malfunctions
The Whirlpool washing machine is equipped with a "self-diagnosis" function, which makes it possible to instantly find out if an error has occurred in the operation of the equipment.
If, during the operation of the household appliance, the washing stops unexpectedly, the indicator and the service key come on, it means that a failure has occurred.
The brand's newest washing machines are manufactured without a display. Their control panel contains LED bulbs, each of which is tied to a specific process:
- there is no water supply;
- prewash;
- regular wash;
- rinsing;
- stop with water;
- spin / drain mode;
- opened door;
- filter cleaning;
- service.
You can verify the presence of faults and determine their nature using the service testing of the equipment, following the instructions:
- start the "Drain" program;
- cancel all programs;
- select the "Drain" program;
- Press the Soak button 5 times.
After these manipulations, the machine will automatically start a test wash. In its process, the drum will be filled with water, it will begin to rotate, the water will heat up, at the end the drain and spin functions will work. When the test wash is completed, you can see the error code on the display or on the display panel.
The most common breakdowns in modern Whirlpool washing machines are:
- accumulation of a large amount of garbage in the drainage path;
- breakdown or malfunction of the pump;
- leakage of the sealing tank;
- the shield on the electric motor has become unusable;
- the belt broke;
- bearings are worn out;
- malfunction of the temperature controller or water heater;
- malfunction in the modular control system.
Let us consider in detail the errors that may occur during the operation of washing machines, and the codes with which they are indicated.
This information is given in the table.
Whirlpool washing machine error codes
Code designation | Breaking | Cause | Repairing the problem |
e01 | Loading door is open | There can be two reasons for the error - the hatch is really open, or the blocker has broken. | Try to close the door well. |
F01 (FH) | The tank is not full of water |
| Make sure there is water in the utility lines, clean the filter, inspect the hose. |
F02 | The water stopped flowing |
| Check for under-pan leaks and inlet valve function. |
F03 | There is no drain |
| Check the integrity of the drain hose and sewer pipes for blockages, clean the filter. |
F04 | Heating system problems | A sensor or heater is out of order. | Make sure that these devices are working and functioning properly. |
F05 | Temperature sensor problems | The connection of the sensor to the relay is broken, or it is broken. | Check the condition of the sensor and the connector. |
F06 | Problems with the operation of the generator tachometer |
| Examine the coil, wiring. |
F07 | Engine operation error |
| Replacing the board with a triac. |
F08 | Heating element problems | Thermostat or controller does not work | Make sure that the elements that control temperature and heating are working correctly, replace non-working parts. |
F10 | The engine does not turn |
| Check the triac, wiring. |
F12 | No heating |
| Check wires, thermal sensor. If the relay is broken, it must be replaced. |
F13 | No water entering the tank |
| Check if there is water pressure in the system, clean the hose. |
F14 | Control board problems |
| Flash memory or complete replacement of the module. |
F18 | Powder is not suitable | Choose and buy whatever powder you can use. | |
F19 | Malfunctions of the power supply system | Strong power surges. | Check the voltage if possible. |
F20 | Control module malfunctioning | Failure in the board. | Reboot the system, replace the main unit. |
F23 | The water bay works poorly | Failure in the functioning of the pressure switch. | Check the integrity of all wires and tubes, clean the filter. |
F24 | Water level controller does not function | Broken sensor. | Replace. |
F26 | No engine speed | Malfunctions in the functioning of the triac. | Check module, replace. |
F31 | Update missing | This problem is inherent only in new models of household appliances. Make sure the Internet is connected and update the program. | |
Absolutely all errors that can occur with Whirlpool washing machines, and how to fix them, are described in detail in the instructions for use. Therefore, it is advisable to store the document.
How to fix?
As soon as a signal from the device was noticed, it means that something went wrong, and you need to immediately start looking for the problem to fix it.
Each owner of a washing machine has the right to decide how to fix the breakdown. Someone prefers professional repair in a service center, while the other takes everything into their own hands, trying to fix it with their own hands. But there is no need to harbor illusions that this can be done without much difficulty. This is not at all the case: the device of the washing unit is rather complicated, and in order to cope with a breakdown, you need to have the knowledge and skills to work with this type of device.
If you want the washing machine to be repaired with high quality and still serve you, do not seek to save money, contact the master or the service center under warranty, if its term has not yet expired. Experience shows that you can only partially cope with malfunctions in the Whirlpool washing machine... And, most likely, such repairs will not be long-term.
Advice
Of course, every user of the washing machine wants the device to work as long as possible and not break. With proper use of the device, according to the manufacturers, during the entire warranty period, there should definitely be no breakdown.
And if you use the unit strictly according to the instructions and take care of it, it, in general, will not break.
It is advisable to adhere to the recommendations of specialists so that system errors and failures do not occur in the operation of the device.
- Each Whirlpool washing machine is equipped with a drain filter that prevents various types of debris from entering the drain. The filter should be maintained and cleaned to reduce the likelihood of a drain error.Information on how to do this is contained in the instructions for use.
- It is advisable to take out and wash the container for detergents at the end of the wash. Their remnants over time clog the channels of the device, thereby provoking a program failure.
- Keep an eye on the intake filter - inspect and clean it every six months. The reason for the blockage is poor quality water from the pipeline. If the filter is clogged, water slowly flows into the machine.
- When finished washing, leave the door open to allow the appliance to dry well.
- The weakest point of any washing machine is the drain hose. It often clogs up and, over time, gives in to deformation, bends. It is necessary to monitor its condition, avoiding these troubles.
- Inspect the inlet hose periodically. If cracks or kinks are noticed on it, replace it immediately.
- Monitor the condition of the hatch cuff. Wipe it clean after each use of the clipper.
And also do not forget to keep an eye on the appearance of the typewriter. If you adhere to all the recommendations, follow the instructions and respond in time to any problems or errors that have arisen, the device will serve for a long time.
What to do if service is lit in the Whirlpool washing machine, see below.
Thanks! As always, clear and understandable. Just such a malfunction was highlighted on the AWE-6516. I will try to repair it.
The comment was sent successfully.