The meaning of the 4E error on the Samsung washing machine and how to fix it

Samsung washing machines are of high quality and long service life. A high-quality self-diagnosis system allows you to pay attention to any malfunction in time. This allows you to prevent the aggravation of the problem and make repairs on time. It is worth noting that in some cases you will have to consult a specialist.

A Samsung washing machine can upset its owner by displaying an error code 4E on the screen. The appliance cannot draw water for the program. Error 4E is accompanied by the absence of a sound for fluid intake. In some models, the code for this problem is displayed as 4C.

Some owners of Samsung washing machines confuse codes 4E and E4. The last mistake is not related to water at all. The appearance of such a set of symbols on the screen signals an imbalance in the drum. It usually occurs when too much or too little clothing is loaded. And also a washing machine can highlight this error if things get lost in a lump and stick to one part of the drum.

The washing machine gives a 4E error if it cannot draw water within 2 minutes after starting the program. And also the technique shows the code if the liquid level does not reach the required level within 10 minutes. Both situations cause the control module to suspend the execution of the program. You can usually fix the problem yourself.

Error 4E can appear at any stage of the wash when the technician needs clean water. There are several possible reasons.

1. There is simply no cold water in the house. Probably, the supply was closed by utilities due to repairs or an accident.
2. The water supply hose is not properly connected to the water supply or to the appliance itself.
3. The problem may be a blockage. Debris usually accumulates in the filters and inside the water supply hose itself.
4. A valve or faucet on the pipe is broken and interferes with fluid intake.
5. There is not enough pressure in the water supply. Water flows under too little pressure.
6. The pressure switch is out of order. This part determines the water level in the tank.
7. The control module is out of order. In this case, the machine does not work correctly, although there is no specific breakdown associated with water intake.
8. There are problems in the washing machine draining system.

Error code 4E on the screen, the machine does not erase - you need to urgently take some action. First you need to calm down. Quite often, the code is shown on the display when starting the program at the very beginning of the wash. In this case, you need to follow the instructions.

1. Check the water tap on the pipe. Open it if it was closed or not turned out completely.
2. Inspect the entire water supply system: faucet, valve and adapter. It is possible that some part leaked, and this led to a malfunction. It is enough to eliminate the original problem and restart the wash.
3. It is necessary to check the pressure with which the water enters the hose.

Consider the step-by-step cleaning instructions.

1. Shut off the water supply to the washing machine.
2. Disconnect the hose from the vehicle at the rear. Cover tightly to prevent water spilling out.
3. Remove the filter with a pliers or other suitable tool.
4. In some cases, the part needs to be replaced altogether, but more often a simple wash is enough. When cleaning the filter, use running warm water. It is important to clean each compartment and fasteners from both the outside and the inside.
5. Install a clean filter in the hose by screwing it into place.
6. Tighten all fasteners tightly, turn on the water supply.

Sometimes there is no pressure in the hose of a Samsung washing machine. In this case, you also need to check the hose. Aquastop models may include a red light to indicate a problem with the water connection. In such a situation, the hose will have to be changed. Aquastop washing machines, when the indicator is turned on, make an emergency lock, so it is impossible to use the part further.

It may be that the indicator does not light, or the ordinary hose does not fill with water. In this case, the problem of pressure should be solved by following a series of actions.

1. Unplug the washing machine from the outlet.
2. Close the water supply valve to the equipment.
3. Pour water into the hose. If it passes freely, then the problem is in the plumbing.
4. If the liquid is standing, it does not flow, then it is necessary to remove the hose and clean it. In some cases, replacement may be required.

It happens that the wash started normally, but error 4E appeared before rinsing. You need to solve the problem like this:

1. check for cold water in the water supply;
2. disconnect the washing machine from the mains;
3. make sure that the water drain hose is connected according to the instructions for the technique, correct the situation if necessary;
4. find out what is the pressure inside the hose;
5. connect the washing machine to the mains;
6. turn on the rinse and spin mode.

Error 4E can be associated with rather serious damage inside the washing machine. It is worth calling a specialist in some cases.

1. Failure to draw water is a sign of inoperability. This may be due to a broken intake valve. It is this detail that regulates the flow of water. If a breakdown occurs, the valve does not open, and the liquid simply cannot get inside.
2. An error appeared on the display suddenly during a program. This behavior of the technique can be caused by problems in the control module. This detail regulates the operation of the washing machine as a whole.
3. Washing starts but no water is supplied. The pressure switch may be damaged. This element controls the amount of water inside the machine. The relay breaks down as a result of a deep blockage. Less commonly, a part is detached or broken during transport. You can break the pressure switch if you use the washing machine incorrectly. In this case, the master takes out the part, cleans it or completely changes it.

Samsung washing machines may display an error code 4E if they cannot draw water for washing. There can be many reasons, some can be solved by hand. You shouldn't do something with the technique if you don't have the necessary skills or knowledge. Do not disassemble the washing machine if it is connected to the power supply.

See below for how to solve the water supply problem.