Samsung washing machine does not spin: causes and remedies for breakage

The automatic washing machine is an indispensable assistant for every housewife, which greatly simplifies the process of taking care of linen, reduces the level of physical exertion and allows you to simultaneously perform several tasks at once. The main tasks of this household appliance are not only high-quality washing and rinsing, but also spinning. Disruption of the moisture removal process is a common problem that you can solve on your own or seek help from specialists. To reduce the number of breakdowns, it is imperative to use prevention.

The Samsung washing machine is a reliable household appliance that stands out for its quality and durability. Despite the positive characteristics of household appliances, housewives are often faced with the fact that the machine has stopped spinning the laundry, freezes or does not spin. This problem is not critical, but it still requires attention. Experts recommend paying attention to the first signs of a malfunction of the spin system:

• the presence of water at the end of the set cycle;
• delayed drain;
• preservation of a large amount of moisture in things;
• the presence of extraneous sounds during spinning.

The reasons for this breakdown may be not only technical malfunctions, but also non-observance of the rules for operating the equipment. Experts identify the following options for incorrect use of the device:

• one-time loading of a large volume of laundry or its incorrect distribution in the drum;
• incorrect setting of the washing mode;
• excessive contamination of the drain filter and hose;
• setting the maximum number of spinning revolutions.

The above difficulties can be quickly and efficiently solved independently, but along with them There are a number of technical reasons why the machine does not wring out or does not wring out the laundry well:

• clogging of the sewer;
• air entering the pump;
• clogged drain hose;
• finding foreign objects in the pump;
• breakdown of the control module;
• failure of the pressure switch;
• damage to internal electrical cables;
• breakdown of the pump;
• low level of permeability (its complete absence) of the branch pipe.

Reasons for not turning off the spin:

• clogged water discharge valve;
• breakage of speed control sensors;
• failure of the heating element;
• disruption of the electronic unit;
• blockage of the filtration system.

To accurately determine the type of breakdown, experts recommend that you carefully study all associated factors and, by elimination, determine the most likely problem.

Here is a list of the most common problems and how to identify them.

• The problem with the intake of liquid by the sewer - disconnecting the hose from the sewer pipe, turning on the drain mode. The ingress of water into the tank is a sign of a blockage in the sewer drain.
• Clogged drain hose (drain does not work) - moving the device to a horizontal position, covering the engine with a large package, disconnecting the fixing clamps from the pipe. You can find the blockage and remove it with a strong pressure of water or a long wire.
• Airing the pump - placing the hose on the floor, turning on the drain mode. Lack of water is a sign of an airlock.
• The presence of a foreign object in the pump - dismantling the concentrator, removing small objects and dirt, diagnostics of impeller rotation.
• Water level sensor malfunction - lack of control over the water level. A broken pressure switch cannot be repaired and needs to be completely replaced.
• Breakdown of the control panel - failure of the computer program to perform the specified functions.
• Damage to electrical cables - visual inspection of wires and checking them with a special device.

You can restore the device to work both independently and with the help of qualified specialists. Before repairing the device, experts recommend the following activities:

• does not turn on - check the set mode, weight and correct distribution of the laundry, reboot, make diagnostics;
• squeezes poorly - clean the drain system, check the correct location of the elements.

To solve the problem on your own, you need to carefully study the instructions, purchase the necessary tools and consult with specialists.

You can get rid of the clogging of the drain filter, pipe and hose using a strong pressure of water or wire. To prevent the formation of a blockage, it is necessary to regularly carry out preventive measures. In the event of a pump breakdown, it is better to seek help from specialists, and if possible, the old part will be reanimated. You should not repair the tachometer yourself. Experts will not only check fasteners, wires and contacts, but also clean, tighten and insulate problem areas, and, if necessary, carry out a complete replacement of the element.

Disassembly and repair of the electric motor must be carried out with special tools that are available only in service centers. Most often, collector brushes and coils fail, which must be replaced with new ones. The wear of these elements is inevitable and leads to a slowdown in the operation of the entire device. The most difficult failure is the failure of the electronic control module. To restore its performance, the system will have to be changed to a new one.

In order to prevent the appearance of this problem, experienced housewives recommend that you carefully examine all things before washing and be sure to remove cigarettes, money, watches, jewelry and batteries. It is strictly forbidden to use detergents of poor quality, as well as to violate the proportions of the powder during washing. If the permissible norm of detergents is regularly exceeded, the water level sensor may fail.

Regular care of the pipettes is a guarantee of long-term operation of the device. After each wash, it is imperative to remove any residual powder and fabric softener, flush the compartments and remove any remaining moisture.

To prevent voltage fluctuations, experts recommend that you always install surge protectors, which will help to avoid replacing boards. The use of compounds for cleaning with a high level of acidity is permissible only in very rare cases, due to the fact that they destroy the protective layer of the drum and provoke the development of corrosion. Maintaining both external and internal cleanliness of the device, as well as cleaning of debris from the powder compartments and air conditioners, will help to reduce the frequency of repairs. After washing, experts recommend closing the door only after the moisture has completely evaporated.

For the most reliable operation of the washing machine, it is strictly forbidden to install it on uneven and unstable surfaces that will create unnecessary additional vibration. The device must not come into contact with other electronic devices that may cause a software failure. The optimal interval between downloads should be at least 2 hours.

The life and everyday life of a modern person is closely related to the surrounding household appliances. These devices help you in your professional and daily life. Over the past few years, automatic washing machines have been in high demand, which greatly simplify household chores.

Due to the increased demand and high intensity of operation, these devices often fail. One of the most common problems is a malfunction of the spin system.

See below for what to do if your Samsung washing machine won't spin your laundry.