LG washing machine does not turn on: malfunctions and how to fix them

Sometimes household appliances give us surprises. So, the LG washing machine, which was working properly yesterday, simply refuses to turn on today. However, you should not write off the device immediately. First, you need to determine the possible reasons why the device does not turn on, and also consider options for correcting this trouble. This is what we are going to do in this article.

It is very easy to determine such a malfunction as not turning on the automatic machine: it does not work at all, and when it is turned on, the display does not light up at all, or one indicator lights up or all at once.

There are several reasons for this problem.

• The Start button is faulty. This could be due to the fact that she sunk or stuck. Also, contacts could simply move away.
• Lack of electricity. This can happen for two reasons: the washing machine is simply not connected to the network, or there is simply no electricity.
• The power cord or the outlet itself to which it is connected is damaged and defective.
• The noise filter may have been damaged or burned out altogether.
• The control module has become unusable.
• The wires of the circuit itself are burned out or poorly connected to each other.
• The washer door lock does not work.

If the LG machine does not turn on, first of all you need to make sure of some points.

• The power cord is plugged into an outlet. If it is really on, then it is worth checking the availability of electricity in general. If everything is in order here, you need to make sure that this particular outlet has sufficient voltage. Sometimes it happens that its level is insufficient to activate the device. In this case, the voltage in other outlets, even in the same room, may be serviceable. To make sure that the problem is really not in the washing machine, you should simply connect to the outlet any other appliance that is sufficient for operation at a lower voltage.
• If it's not about the electricity, then you need to check the outlet itself. It should not be scorched, it should not smell like fumes, and smoke should not come out.
• Now we inspect the power cord itself and its plug. They should not be damaged or melted. The cord itself should be even, without kinks and bends. It is very important that no wires stick out of it, especially those that are charred and bare.

It is also necessary to carefully study the electronic display of the machine itself. It may well be that an error code will be displayed on it, which became the root cause that the device stopped turning on.

It is important to understand that if the device works through an extension cord, then the problem may lie in it... In order to determine whether this is really so, it is necessary to check the integrity of its cord and outlet, and also try to turn on another device through an extension cord.

The specific list of actions will depend on the exact reason for the failure of the device.

So, if the lock on the door of the machine stops working or the handle on it breaks, you will need to completely replace these parts... To do this, you need to purchase a new blocking element and a handle from the same manufacturer and designed specifically for this model of the machine.

This device is designed to protect the appliance from combustion. Power surges, frequent switching on and off the power negatively affect the operation of the device. It is the surge protectors that are designed to eliminate these consequences.

However, if power outages occur too often, then they themselves can burn out or close, and therefore completely paralyze the operation of the machine. In this case, you need to do the following:

• find the filter - it is located under the top cover of the case;
• using a multimeter, it is necessary to determine how it reacts to incoming and outgoing voltages;
• if in the first case the filter works normally, but the outgoing voltage does not pick up, it must be replaced.

If the machine does not turn on for other reasons, you need to do a little differently.

• Check if the automatic safety interlock has tripped. Today it is installed by default on all automatic washing machines from this manufacturer. It works when the device is energized, that is, it is not grounded. In such cases, the machine is disconnected from the network and its grounding is checked, if necessary, it is corrected.
• If all the indicators are lit or only one, and the error code is not displayed on the electronic board, you should check the correct operation of the "Start" button. It is possible that it simply disconnected from the microcircuits or just got stuck. In this case, the device should be de-energized, the button should be removed from the machine body, the contacts on the microcircuit should be cleaned and replaced. If there is any damage to the button, it should be replaced with a new one.
• A malfunction of the control unit can also be the reason that the automatic machine does not turn on. In this case, the module must be removed from the case, checked for integrity and, if possible, taken to the diagnostic center for replacement.

All these methods of solving the problem help in those situations when the machine does not turn on for work at all. In addition, they require the use of special tools and handling skills.

In some situations, the machine will turn on normally and the washing process will start as usual. Only directly during operation can the device turn off completely, and then it is no longer possible to turn it on. If such a case has occurred, you must proceed as follows:

• disconnect the machine from the outlet;
• check the level of its installation and the distribution of things in the drum;
• open the hatch door with the help of an emergency cable, spread things evenly along the drum and remove some of them from the machine;
• close the door tightly and turn on the device again.

If they did not bring the desired result, and the other ways of solving the problem do not help, you should contact the service center for specialist help. Trying to start the machine yourself in such cases is not recommended.

Repair of the LG washing machine in the video below.