Leran washing machines: characteristics and range
Leran washing machines are not very common. But still, in terms of their characteristics, they fully meet the requirements of most consumers. You just need to choose the right model among the entire model range and operate it correctly.
Peculiarities
Speaking about Leran washing machines, one cannot but point out that household appliances from this manufacturer entered the Russian market only in 2010. Over 30% of all products are manufactured in Russian factories. The production of Leran washing machines in our country is organized at the Kirov factory. A separate line of especially high-quality washing equipment is produced at a Turkish factory in the city of Izmir. The exclusive representative of this brand is the Expert-Rembyttekhnika retail chain.
It should be noted that most of Leran's products are still manufactured in China, in the industrial area of Guangzhou... Advanced modern enterprises are gathered there. The company managed to organize both the development and production of exceptional inexpensive machines. When creating developments, current trends in the field of household appliances are taken into account, therefore they meet the most stringent requirements.
At any Leran facility, production is certified in accordance with key international standards. Intensive quality control allows you to count on the stable performance of household appliances of their functions throughout the entire period of use. 100% of the manufactured equipment is also subject to an independent examination. It is accompanied by a photographic report that follows strict protocol.
Popular models
There are no semi-automatic washing machines in the Leran line. There are exclusively automatic class vehicles. A striking example of this is TWM 210-30 B... This machine can be loaded with up to 3 kg of laundry. Bookmarking is done through a vertical hatch; dimensions of the device 0.6x0.5x0.4 m.
TWM 210-30 B will be able to wring out laundry at a speed of 1350 rpm. The designers, alas, did not take care of the delayed start mode. Intelligent wash control and temperature selection are not possible.
You cannot wash sports shoes in it, there are no modes of enhanced rinsing and the most economical program. The tank is made of plastic and the total weight of the machine is 11.5 kg.
Other features should be noted:
the possibility of direct injection;
inability to supply steam;
lack of drum lighting;
opening the hatch 180 degrees;
traditional white color;
lack of protection from children, from power surges;
sound volume during washing 60 dB;
sound volume at spinning 68 dB;
1 year brand warranty.
Another vertical model - TWM 220-45 W... It is loaded with up to 4.5 kg of linen. The dimensions of the machine are 0.655x0.73x0.35 m. It will spin at a speed of up to 1300 rpm. The product is classified in energy category B.
Consumers cannot postpone the start, but they will be able to set a specific end time for washing. The drum is made of selected plastic. The dimensions of the device are 0.655x0.73x0.35 m. Its weight is 16 kg, and the control is realized on a purely mechanical principle.
This activator machine consumes 95 liters of water for 1 wash. It is painted in a traditional white tone. You cannot select an arbitrary spin speed. The spin volume is 72 dB. For comparison: on the main wash cycle, the sound volume will be 59 dB.
It is often considered a good choice. WMXS 10632 WD. This washing machine can hold up to 6 kg of laundry.Loading is done through the front door. The system will wash laundry in accordance with category A. It is possible to delay the start by 1-24 hours.
Intelligent washing coordination is also provided. The machine will be able to wash wool with confidence. Additional rinsing is carried out at the request of users. It is also worth mentioning programs with increased efficiency, with the fastest end possible, with prevention of tissue creasing. Bubble wash is not provided.
Other parameters:
weight 60 kg;
dimensions 0.6x0.85x0.34 m;
installation in a separate mode;
LCD display;
electronic control;
spin rate up to 1000 rpm;
the ability to select the spin parameter;
average water consumption during washing 48 l;
the ability to open the door 180 degrees;
sound volume during washing 56 dB;
sound volume during spinning 75 dB.
The next snazzy model on the list is WMS 43126 WD2. It can delay the start and perform a prewash. Of the programs, it is worth noting the processing of delicate fabrics, wool, sportswear, enhanced rinsing and accelerated washing. Efficiency turns out to be an attractive feature (energy consumption category A +++). The machine weighs 54 kg, and its dimensions are 0.595x0.85x0.46 m; there will be no signal that the wash is complete.
You can choose another model WAD 9914K WD3, which is done with a drying function. The machine is controlled by an electronic unit and is installed strictly on one side. Up to 10 kg of laundry can be put inside, and in the drying mode - up to 7 kg. It will be possible to wash both delicate and childish things (these are different programs). The mass of the device reaches 74 kg, its dimensions are 0.595x0.845x0.66 m.
Exploitation
The Leran washing machine can only be switched on safely in rooms where there is no excessive humidity. Equipment and sockets used for connection must be grounded. Make sure that the floor covering does not interfere with the normal ventilation of the equipment. It is inappropriate to wash clothes that are clogged with volatile substances. If the machine does not drain the water, you need:
check the installation of the sewer hose;
check if it is frozen, not clogged with foreign objects;
clean the drain if necessary;
check the serviceability of automation and electrical circuits.
Extraneous sounds in the process of work are usually provoked by unnecessary objects that have got inside. But the outflow of water at the first start corresponds to the norm - this is the liquid left after factory testing.
Leran proprietary error codes are also useful to consider. They are designated starting with the word Error, to which a sequence number is added.
Number 1 indicates that the hatch is not locked. Signal 3 means that the temperature sensor is damaged. Error 4 marks a malfunction of the heating element. When the number 5 appears, we can talk about difficulties with a set of water. Error 6 and 7 indicate problems in the electronic system. Signals 8 and 9 appear during overflow, and the UNB error, which stands alone, indicates that the laundry is loaded incorrectly.
Review overview
The opinions of buyers and experts about Leran washing machines differ. Quite a few people are wary of this technique due to its low profile. However, the appearance of such machines satisfies the most stringent demands of aesthetes. They note the simplicity and decent build quality. Most owners of washing units of the Russian-Chinese concern say that it makes no sense to expect something outstanding from most of these models. But such products do a good job with their primary tasks.
You can always buy an inexpensive typewriter with a capacious drum. It is extremely rare for other manufacturers to offer offers with the same price-performance ratio. All basic programs that are really needed in everyday life of 80% of consumers are provided. The simplicity of the control system also evokes approval.
Other reviews say about:
reliability;
relatively low noise;
decent spin;
availability of models with particularly narrow cases;
full compliance of the cost of products with expectations from them.
See below for an overview of the washing machine.
Leran washing machine gives error E13.
Error E13 is a malfunction of the UBL, you need to replace the lock.
Hello, please help: water is collected and immediately drained, it gives an error E02.
This can be due to a number of reasons: 1. wrong location of the hose, its rupture or too low position, it must be installed at least 40 cm from the floor level. 2. The reason may be in the closure of the pressure switch - the water level sensor, which shows its amount in the tank.
We bought a washing machine, plugged it in, but it does not pump water. Why?
Anna, the first thing you can check: the shut-off valve is sometimes closed. With the correct installation of the washing machine, it is always connected to the water supply through its shut-off valve. Even on a common pipe, a three-way valve with overlapping is installed on a typewriter. Check if the tap is open. Second: if the inlet hose is kinked or squashed. It must be free, not pinched, so that the machine draws water. Check if the washing machine has moved and pinched the hose or you put something on top and pinched it. Eliminate the obstruction, straighten the inlet hose. And the third reason for a new machine: the washer door is not closed tightly. If the door does not close, the machine will not draw water. Check the hatch, open and close it again. Often laundry interferes with the door, pay attention to this, and do not overload the unit above normal.
The machine washed and began to show error E 16, what does this mean?
Error code F17. What to check?
The comment was sent successfully.