Heating element for the Indesit washing machine: purpose and instructions for replacing

The well-known brand Indesit produces high-quality washing machines that are characterized by wide functionality and a long service life. The device contains many important components and parts. One of them can be called a heating element. In this article, we will find out what the purpose of the specified spare part is, and we will figure out how to replace it with our own hands.

Any washing machine is a technically complex device, the design of which provides for many functional units. Each spare part is designed to fulfill a specific task. For example, TEN is a special heating element... It is he who is responsible for heating the water in the unit to the required temperature values.

In different cars, this device is located in different places. There are 2 wires to the heating element. This spare part is attached to the bottom of the unit reservoir.

Despite the fact that Indesit household appliances are famous for their impeccable quality, this does not mean that all the details in them are eternal. Any spare part may one day break down, and heating elements are no exception. There are times when the heating element needs to be replaced. This process cannot be called too complicated and incomprehensible, so many users undertake to solve the problem on their own.

Let's take a look at how to properly remove the heating elements of Indesit machines.

• Do not rush to remove the heating element yourself for subsequent replacement. First you need to check whether the cause of the equipment malfunction is really in it. If you find out that it is the heating element that is faulty and it needs to be changed, then you can safely move on. Disconnect the unit from the power supply, the water supply system and the sewage system. Do not forget about this important stage of the repair work.

• Clean up the free space in advance for the planned process - nothing should interfere with you. If possible, it is permissible to pull out and replace the heating element in the garage or workshop. Turn the machine with the back towards you. Proceed carefully. Remove the back cover of the housing part of the device. To do this, you need to unscrew all the fasteners that hold it in place.

• With the utmost care, disconnect the wires that lead to the heating element located at the bottom of the unit. In this case, you should not make too sharp movements so as not to damage important parts of the washing machine.

• Call the heating element using a multimeter. A control light will do instead. With the help of these devices, it will be possible to determine the state of the heating element.

• The next step is to unscrew the fastening nut on the heating element body. Press the pin into the inside of the machine's tank. If you feel that she does not want to give in in any way, then you can tighten the nut and drown the bolt by hitting with a hammer.

• Pry the iron bar with a minus screwdriver and remove the heating element of the unit from the tank. Removing the heating element from such household appliances can be difficult due to the large accumulation of scale on it. For this reason, it is recommended to perform all actions as carefully and carefully as possible, so as not to accidentally damage the heating element seat. If you make such a mistake, it will be extremely difficult (and often completely impossible) to install a new part later.

• Scale that has flown off should be removed from the tank using the tools at hand. This must be done to prevent deposits from entering the hose and then into the pump during draining. If these small work does not work, then at the end of the first test wash it will be necessary to thoroughly clean the coarse filter in front of the drain pump.

To replace an old and defective part with a new one, you will need to purchase a suitable replacement. Visit a specialist store and name the model of your washing machine Indesit. Buy only high-quality heating elements that are in perfect condition. If you save on the purchase of this important functional item, subsequent repairs may be necessary in the future.

Let's consider how the heating element should be replaced in branded household appliances from Indesit.

• Inspect the place where the heating element will land in the tank of the machine. If you notice pollution in this place, you must definitely get rid of them. Clean the desired areas thoroughly.
• Remove the special finger-type temperature sensor from the old heater. Clean it and insert it all the way into the new element.
• Replace the Indesit washer heater by tightening the nut and replacing the correct wires. At this point, you may need photographs taken at the stage of disassembling equipment.
• Do not lock the back cover until you are sure there are no leaks. Connect the appliance and put it on an accelerated wash or rinse program. If no leak is found, the machine can be reassembled to the end.

As you can understand, self-removal and installation of the heating element is not the most difficult thing. The main thing is to act carefully and take your time. It is not recommended to roughly disconnect parts in the construction of the machine, even if they are "hard to give". If you follow these simple rules, the average home craftsman will be able to successfully change the heating element without negative consequences.

If you do not dare to change the heating element in your washing machine yourself or do not have this opportunity, then it is better not to risk the technique. Consult an experienced repairer or contact an Indesit service center.

Do not forget about preventive measures for the Indesit washing machine. Having changed the old heating element for a new one, it will be necessary to prevent the tank in order to remove the dangerous deposits accumulated there. Solid impurities in the form of limescale may be present in the tank. Sometimes not split fats from things are deposited there (in the form of mucus). This fat gives off an unpleasant odor.

Preventive measures should be carried out periodically, depending on how often you start the wash, at what temperature conditions. So, in order to prevent the formation of deposits in Indesit clippers, it is recommended to perform the following actions.

• A special salt filter will need to be installed in the gap in the supply of exploited water. It should be a quality softener, which will always need to be replaced in a timely manner.
• For washing, it is recommended to use exclusively high-quality powders and helium compounds - with their operation, heating elements and other components of washing machines last much longer.
• Do not forget to carry out periodic preventive maintenance of equipment from scale by using specialized products sold in many retail outlets. People often use folk remedies such as vinegar or citric acid, which can easily remove excess fat and scale. But it must be borne in mind that no one can say for sure how these agents, with their chemical composition, can affect the condition of the rubber elements and seals of the machine.
• You should not be zealous with too frequent wash cycles using high temperature water. Detergents produced by modern manufacturers can effectively deal with most contaminants in low temperatures. Thus, washing the laundry is more gentle and gentle.
• You should always keep under control the condition of your household appliances. Of course, many users do not delve into possible problems and only think about them when they encounter them. It is advisable to check from time to time whether all the units of the unit are working properly, whether there are any malfunctions.

See below for a master class on replacing the heating element.