Error F12 on the display of the Indesit washing machine: code decoding, cause, elimination

Washing machine Indesit is an indispensable assistant for many modern people. However, even it can sometimes fail, and then the error code F12 lights up on the display. In such cases, you should not be afraid, panic, and even more so write off the device for scrap. It is necessary to determine what exactly this error means, find out how to eliminate it, and most importantly - how to prevent its occurrence in the future. This is what we will talk about in this article.

Unfortunately, the F12 error on the Indesit washing machine can occur quite often, especially in the models of the previous generation. Moreover, if the device is not equipped with a digital display, the device issues the code in a slightly different way.

In this case, the indication of two buttons lights up simultaneously. Usually this is "Spin" or "Super wash". The equipment itself does not react to any manipulations - programs in this case are not started or disabled, and the "Start" button remains inactive.

Error F12 signals that a failure has occurred and the key connection between the control module of the automatic machine and its light indication has been lost. But since the connection is not completely lost (the device was able to signal a problem), you can try to eliminate the error yourself.

But for this it is necessary to correctly determine the reasons why it appeared at all.

• The program crashed. This usually happens due to a sudden power surge, a change in the water pressure in the line or its shutdown.
• Overloading the device itself. There are two options here: too much laundry is placed in the tub (more than allowed by the manufacturer of the equipment) or the machine washes more than 3 cycles in a row.
• There is no contact between the elements of the control module and the indication of the machine itself.
• The buttons of the device, which are responsible for this or that cycle of operation, are simply out of order.
• The contacts responsible for the indication burned out or came off.

Of course, the solution to the problem and the elimination of the F12 error in such cases will be different.

If the code appears when you turn on the washing machine for the first time, then There are several ways to try to fix it.

• Disconnect the device from the mains. Wait 10-15 minutes. Connect again to the socket and select any washing program. If the error persists, you must repeat the procedure two more times.
• Unplug the power cord from the socket. Let the machine rest for half an hour. Then reconnect to the network. Press simultaneously the "Start" and "ON" buttons and hold them for 15-30 seconds.

If these two methods did not help to solve the problem, then it is necessary to remove the top cover of the device case, remove the control module and carefully examine all its contacts. Clean them if necessary.

Repairs should be carried out using only original spare parts. If you doubt that you can do all the work correctly, it is better not to risk it and still seek help from specialists.

If the F12 code appears directly during the wash cycle, proceed as follows:

• reset the installed program;
• provide an appliance;
• open the tank by placing a cup for water under it;
• evenly distribute things inside the tank or remove them altogether;
• connect the device to the network and select the required program.

If the error persists, and the machine does not respond to the given commands, then you cannot do without the help of the wizard.

No one is immune from the appearance of the error code F12. However, repairmen for Indesit automatic washing machines recommend following the rules that will help minimize the risk of its occurrence in the future.

• After each wash, it is necessary not only to disconnect the machine from the mains, but also to leave it open for airing. Voltage fluctuations and increased constant humidity levels inside the device can cause the contacts between the control module and the display to close.
• Never overload the clipper with more than the specified weight. The best option is considered when the weight of the laundry is less than 500-800 grams of the maximum allowable by the manufacturer.

And one more thing: if the error code began to appear too often and so far it has been possible to solve the problem on its own, it is still better to contact the wizard to diagnose the device and replace some parts.

How to eliminate the F12 error on the display of the Indesit washing machine, see the following video.