Error F08 on the Indesit washing machine

If an error with code F08 appears, it is necessary to disconnect the equipment from the mains as soon as possible. You cannot use the washing machine until the problem is fixed. It is also strongly discouraged to leave the equipment unattended - it can be dangerous.

With the help of a special coding, modern equipment notifies the user about malfunctions. Error F08 on the Indesit washing machine can appear for several reasons. As a rule, the cause of the failure is associated with a malfunction and incorrect operation of the temperature sensor. In most cases, it is necessary to replace the temperature sensor or heating element, which could burn out during operation.

Consider the list of circumstances due to which the washing machine issues the F08 code.

• More than 90% of all cases are associated with the failure of a heating element or a thermal sensor of household appliances. It can be closed during operation.
• Malfunctions with the control module rarely cause an error, but in 5-6% of cases, it is this element that is the problem. The module should be repaired or replaced. Such work can only be carried out by a professional master with the necessary knowledge and skills.
• The last reason is a problem with the engine or wiring. Possibly electric leakage.

It is better to start diagnosing equipment by checking the heating element. The first step is to check the heating element (ring) using a megohmmeter. With a value of 20 MOhm and below, you just need to replace the element and the problem should be solved.

Otherwise, the following works are carried out.

• The housing of household appliances is opened by removing the back wall. If necessary, remove the drive belt. It can get in the way during work.
• Absolutely all wires should be carefully removed from the sensor and heating element.
• The above items must be carefully inspected for defects. When performing a visual inspection, first of all, you need to pay attention to traces of corrosion. It becomes a common cause of the F08 error.
• If, when inspecting the heat sensor, rust and other signs of damage were found, the heating element should be replaced with a new one. Cleaning, even the most thorough, will not give the desired result. It must be remembered that this element cannot be repaired. It is necessary to select an original spare part that will exactly fit a specific model of a washing machine.

In some cases, home appliances may issue a code with the above error due to problems with the motor or wiring. Often the cause of such problems is high humidity in the room. High humidity is normal given that appliances are placed in kitchens and bathrooms, but excessively high humidity levels can cause malfunctions.

Moisture that penetrates under the body of the washing machine oxidizes the contacts. As a result, the display shows the code F08. If the inspection of the heat sensor and heating element showed that they are in good working order, most likely it is a matter of corrosion.

Also, dust from the brushes of the collector motor negatively affects the operation of the equipment. In this case, you will have to check the motor by ringing it carefully. Then you need to check each contact for rust. They are cleaned and purged.

If the above checks fail and the washing machine refuses to work with an error code, the problem may be in the control module. According to statistics, this is the rarest breakdown, however, it can also take place.

In this case, carefully remove the module and start testing. You need to do the work only if you have the necessary tools, knowledge and skills. Only a specialist will be able to find a broken element and fix the problem. If a beginner with no experience takes up the repair, there is a risk of completely ruining the module, and then all that remains is to change it to a new one.

Fixing error F08 is much more difficult than it might seem at first glance. As practice shows, a breakdown can consist in malfunctions of various parts. When the code appears, it is impossible to use household appliances until the problem is completely resolved. Even if the machine turns on and starts a wash program, operation can be dangerous.

Also, if an error occurs, it is recommended to do the following.

• Check the electrical outlets and the integrity of the power cord.
• Modern washing machines run on special software. A reboot will help solve the problem. To do this, turn off the equipment, disconnect it and leave it alone for about 20 minutes. After that, you should restart the washing machine.
• Check the water supply. The machine may give an error due to insufficient water supply.
• Listen for third-party sounds during the wash. A foreign object may have fallen under the cabinet.

So that household appliances work for a long time and harmoniously, you should heed the recommendations for using the equipment.

• When the wash is finished and the laundry has been unloaded, leave the doors ajar. This will help prevent moisture build-up, which can cause mold and mildew to form.
• The valve responsible for supplying water to the washing machine must be closed when not using the equipment. During water intake, it must be fully open to ensure the required pressure.
• Rinse the container for detergent and other detergents periodically. You should also clean the inside and outside of the washing machine. Use sponges or soft cloths for work. Remember to unplug the washing machine before cleaning.
• Check the integrity of the hose. If it is severely damaged, it should be replaced as soon as possible. This part is subjected to severe stress in every use.
• The sediment filter, which is responsible for sucking out water, must be cleaned regularly. Experts recommend cleaning after each wash of textured and fleecy items. This will help avoid serious contamination, which is often the cause of the failure. When cleaning the filter, you must de-energize the equipment.
• Each model of washing machine is designed for a specific load. The maximum weight of the laundry must not be exceeded. Excessive loading will not only lead to rapid wear, but will also cause damage. Remember that wet items weigh much more than dry items. A load exceeding the norm does not allow the washing machine to effectively wash and wring out things.
• Choose the appropriate wash cycle for the type of laundry. Each of the programs has its own characteristics for the most effective washing.
• Use household chemicals specifically designed for automatic washing machines.Manufacturers also offer a wide selection of formulations for various types of fabrics. On the market you can find preparations that clean the washing machine and prevent the build-up of limescale inside the equipment.
• Before placing items in the drum, check that there are no items in the pockets. Clothes with large buttons and heavy metal elements should be turned inside out to avoid damaging the drum.

How to resolve the F08 error, see below.