Malfunctions of the Atlant washing machine and their elimination

The Atlant washing machine is a fairly reliable unit that can handle a variety of operations: from quick washing to caring for delicate fabrics. But even she fails. It is often possible to understand why the equipment does not wring out the laundry and does not drain the water with a simple visual inspection or studying the error codes. Some of the causes of typical malfunctions and repair methods, as well as rare malfunctions and their elimination, are worth considering in more detail.

The Atlant washing machine has its own list of typical malfunctions arising from improper care, operating errors, and equipment wear. It is these reasons that more often than others lead to sad consequences, forcing the owner to stop washing and search for the source of the breakdown.

In a standard situation, the washing machine starts up, a drum spins inside the tank, everything proceeds normally. Any failure in a well-functioning circuit is a reason to pay attention to what exactly might be out of order.

1. Lack of wired network connection. The machine washes, the drum rotates, the indicators light up only when the power is on. If there are more than one user, households may unplug the outlet solely to save energy. When using a surge protector, you need to pay attention to its button. If it is off, you need to return the toggle switch to the correct position.
2. Power outage. In this case, the machine will stop working until the power is fully restored. If the reason was the blowing of the fuses due to an overload in the network, a power surge, it will be possible to restore the power supply by simply returning the levers of the "machine" to the correct position.
3. The wire is damaged. This point is especially true for pet owners. Dogs, and sometimes cats, tend to chew on anything that comes their way. Also, the wire can suffer from kinks, excessive compression, melt at the point of contact. It is strictly forbidden to use equipment with traces of cable damage.

Even if the wash was successful, you shouldn't relax. It happens that the Atlant washing machine does not spin the laundry. Before you start to panic about this, you should check the selected wash mode. On delicate programs, it is simply not provided. If spinning is included in the list of washing steps, you need to deal with the causes of the malfunctions.

The most common of these is a blockage in the drain system. In this case, the machine cannot discharge the water and then start spinning. A breakdown can be caused by a failure of the pump or pressure switch, tachometer. If, after the end of washing, there is water in the hatch, you need to check the drain filter by unscrewing and cleaning it from dirt. It is important not to forget to substitute the container - after removing the obstacle, the water discharge will most likely take place in normal mode. For more complex diagnostics and repairs, the technician will have to disconnect from the network, manually drain the water and take out the laundry.

An independent search for the reasons why the machine does not set and discharge water can be performed without calling the wizard. If water leaks under the door or flows from below, the pressure switch that detects the fill level may be defective. If it breaks down, the technician will continuously fill and drain the liquid. Water can also remain in the drum, and a signal will be sent to the control module that the tank is empty.

If the machine is leaking from the bottom, it may indicate a malfunction of the drain hose or pipe. A leaky connection will cause fluid to seep out of the drain system. If a blockage forms, this can lead to a massive flood in the bathroom.

Filling and draining water is directly related to the operation of the pump. If this element is faulty or the control system, the program unit is out of order, these processes are not carried out in the normal mode. However, most often the fault is the clogging of the filter - inlet or drain.

Also, there may be no water in the system. - it is worth checking the operation of the water supply system in other rooms.

The washing machine can heat cold water to the desired temperature only with the help of a built-in heating element. If the door still remains icy after starting the wash, it is worth checking how intact this element is. Another indirect sign of the problem is deterioration in the quality of washing: dirt remains, the powder is poorly rinsed out, as well as the appearance of a musty, musty odor after removing clothes from the tank.

The appearance during the washing process of any sounds that are not directly related to the actions of the unit is the reason for stopping it. Foreign objects entering the tank can damage the internal parts of the washing machine and cause clogging. However, the unit hums and makes noise sometimes due to quite natural reasons. That is why it is worth trying to establish the character and localization of sounds more accurately.

1. The machine beeps when washing. Most often, this is expressed in the appearance of a characteristic unpleasant sound, repeating at a certain interval - from 5 seconds to several minutes. Sometimes the squeak is accompanied by the reset and stop of the program - with a frequency of 1 time in 3-4 starts. In any case, you need to look for the source in the control board, it is better to entrust further diagnostics to specialists. In Atlant machines, a weak beeping sound throughout the entire operation is associated with the display module - it needs to be replaced, and the problem will disappear.
2. It rattles during spinning. There may be several reasons, but most often - a weakening of the drive belt or a violation of the fixation of the drum, counterweights. Sometimes such sounds occur when foreign metal objects hit: coins, nuts, keys. They must be removed from the tub after washing the laundry.
3. Creaks from behind. For Atlant washing machines, this is due to wear on the mountings and bearings. In addition, the sound can be emitted when rubbing the joints of body parts.

Among other malfunctions that owners of Atlant washing machines face, there are rather atypical breakdowns. They are rare, but this does not diminish the problems.

Most often, this "symptom" occurs when the motor winding is damaged. It is necessary to check its operation under load, measure the current parameters for the presence of breakdowns.

Such a problem may be due to the fact that the transport bolts were not removed from the equipment before installation. Besides, during installation, it is very important to follow all the manufacturer's recommendations. If the installation level is violated or the curvature of the floor does not allow adjustment according to all the rules, problems will inevitably arise. To compensate for vibration and prevent the "escape" of equipment from the spot, special pads and mats help to damp the resulting vibrations.

The vibration of the washing machine during operation can be associated with an imbalance of the laundry in the tub. If the control system is not equipped with a self-balancing mechanism for the tank, wet clothes that have fallen to one side can cause spin problems. They will have to be solved manually by stopping the unit and unlocking the hatch.

The possibility of self-repairing breakdowns should be considered only if you have sufficient experience, tools and free space in the house. In this case you can easily cope with the task of cleaning filters and pipes, replacing heating elements, pressure switch or pump. Some types of work are best left to professionals. For example, an incorrectly connected control board purchased to replace a burned-out module can damage other structural elements of the washing machine.

Leaks in the area of ​​the hatch are mostly associated with damage to the cuff. It can be removed quite easily by hand.

The water supply and drain filters must be cleaned after each use of the equipment. If this is not done, they will gradually clog up. It is necessary to remove not only adhered fibers or threads. A slimy bacterial plaque inside is also dangerous because it gives the washed laundry a stale smell.

If damaged or the inlet valve is clogged, connecting the line with a flexible hose, you need to disconnect it, and then rinse and clean. The broken part is disposed of, replaced with a new one.

It is possible to remove the heating element, pump, pump only after dismantling the machine. It is laid on its side, gaining access to most of the important components and assemblies, and unnecessary elements of the hull plating are removed. All elements powered by electric current are checked for serviceability with a multimeter. If breakdowns or overheated spare parts are detected, they are changed.

About repairing a washing machine with your own hands, see below.