All about staplers "Zubr"

The staple gun allows you to attach one material to another. So, a furniture stapler is used to pull furniture. And also models can be construction and universal. Staples, nails or hairpins are inserted into staplers as fasteners.

The Zubr company is popular among professionals and home craftsmen. The domestic brand manufactures its products in China. The Zubr stapler is made of high quality steel, many models have special rubber inserts. At the same time, the cost of goods is quite affordable.

Domestic engineers with extensive experience work out every detail with high quality. At the same time, the manufacturer gives a 5-year guarantee for each of its staplers. The range includes riveting guns for metal, universal, for cables, as well as furniture and construction. Each master will be able to choose the right tool for solving his problem.

All products of the manufacturer can be used with both staples and nails. The construction stapler can be supplied with a set of consumables. Even novice builders can get started right away. The range of the company includes several models.

1. "Bison 4-31573". The hand gun is made of metal for durability and long service life. The ergonomic handle combined with the light weight of the construction stapler ensures comfortable work. The tool can also be used as a furniture pistol. Consumables with a length of 6-16 mm are suitable.
2. "Zubr Profi 31525" 3 in 1. Suitable for working with plastic, chipboard and wood. Several types of consumables can be used in sizes 6-12 mm or 6-10 mm. The stapler has automatic adjustment for staples of different widths.
3. "Master 31563_z01". The power tool is used with staples 4-14 mm. This is sufficient for joining materials up to 10 mm thick.
4. "Bison ZSP-2000". With this gun, you can attach plastic, wood, fabric, film, leather and much more. The stapler can be used as a construction or furniture stapler. The kit contains consumables. The magazine is designed for 50 nails with a size of 15-30 mm or staples 15-25 mm. The power tool is equipped with an engine cooling system. You cannot press the trigger until the stapler rests against the plane, which guarantees safe use.
5. "Zubr Profi 31527" 5 in 1. The furniture model is used to fix fabric on wood, chipboard or plastic. The tool can be used with nails, hairpins and staples.
6. "Professional 31523_z01" 2 in 1. The gun allows you to drive staples of 4-14 mm in size or nails up to 16 mm long. The steel body of the mechanical device ensures a long service life. The ergonomic handle makes it easy to work for a long time.
7. "Professional 3192". A popular solution for construction, installation and finishing works. It operates with compressed air, which is quite safe. The stapler must be connected to the compressor. It can work with staples 10-30 mm in size, nails 10-35 mm long. It works for a long time without stopping, the engine has received overload protection.

The stapler is used with staples, nails and pins. Most models have fasteners up to 20 mm. However, there are professional construction, universal staplers in which 30 mm nails can be inserted.

Staplers are used in conjunction with suitable consumables. When the staples run out, you need to insert the following ones to continue working. This is quite simple to do.

1. Lock the tool with a fuse. This will prevent accidental activation and injury.
2. Open the magazine lid. It is usually located at the back. There is a groove behind the lid for staples.
3. Pull out the rod with the spring.
4. Turn the staple rail so that the sharp parts are directed in the opposite direction from the handle. Insert into the groove.
5. Return the rod with the spring to its original place.
6. Close the store, remove the fuse.

Immediately after inserting the staples, several shots must be taken to ensure correct installation. If you need to use nails, not staples, then the process is carried out according to the same instructions. Working with a mechanical stapler is quite simple. You can also load staples into an electric or pneumatic tool. Only the tray is opened with a dedicated button.

The subtleties of the process may vary depending on the model, but the general principles are always the same.