All about heat resistant gloves

When working in unsafe conditions, it is necessary to wear protective clothing, which is available in different versions. Heat resistant gloves have excellent performance and are suitable for work in conditions with high or low temperatures. They come in different types and differ in their characteristics.

Heat-resistant gloves must meet the requirements of GOST, therefore, they are manufactured in compliance with the relevant standards. These five-fingered products have elongated leggings, and there is often a cotton lining inside. Split leather is used as the main material; some manufacturers prefer to take split calfskin.

The burst cycle must be at least 500, the cut resistance is measured in an index of 2.5, and the burst strength is 25 N.

It is a manufacturing type of product for employees in the electric power industry and other industrial enterprises. The purpose of the gloves is to protect hands from radiation, open flames, sparks, heated surfaces, convective heat, and splashes of molten metal. However, this type of workwear is suitable for work in conditions and with low temperatures, as it protects against frostbite.

The difference between this product and ordinary gloves is that a special fire-resistant fabric is used for their production, which has anti-static or aramid fibers. The material can be exposed to radiation, but at the same time continues to protect against burns, even in contact with a hot surface. Fireproof gloves are often used on anvils, where workers often come into contact with metal heated in a flame.

It should be noted that requirements are put forward for thermal gloves not only in terms of strength, but also convenience... This element should improve the comfort of working in high temperature areas. The movement should be free, the fabric should not cause allergies, and the seams should not press on the fingers. Such heat-protective gloves according to GOST are in great demand.

Depending on the material used and the purpose, there are several types of gloves.

• Heat Resistant Jerseys are made of fabric with antistatic and aramid fibers. Some models have a discrete flame retardant PVC coating. The product must have elastic cuffs that do not hinder movement. These are heat-resistant gloves, so they are suitable for protection against electric arcs, open flames and various mechanical damages. Protection level 14.1 cal / cm2.

• Silicone gloves are fire-resistant and extremely heat-resistant. This is a multifunctional product that is perfect even for home use while working with a fireplace, fire, baking. The main feature is the anti-slip property, which provides excellent grip. Elasticity adds versatility, so the gloves can fit different hand sizes. They provide excellent protection against cuts and other damage.

• Heat Resistant Leggings, which are often used by welders, have a woolen lining. The palm part is made of split leather, and the aluminized material is used on the back. The length of the glove is 40 cm, and the cuffs are 20 cm. A strong fire-resistant thread is used for stitching the seams. Such a product perfectly perceives convective heat, radiation and the release of molten metal, protecting hands from their effects. Maximum resistance to tears, punctures, cuts and abrasion has made them so in demand.

• Gloves for working with small amounts of fused metal must be highly flame retardant. For this, leggings are suitable, the basis of which is a leather split with a thickness of 1.2 to 1.4 mm. The lining is made of fleece, cotton fabric is used for the cuff. However, these gloves are not very cut resistant, do not allow punctures and can last a long time due to their abrasion resistance.

• You can find a product made from special non-woven felt, which has a nitrile rubber coating. Great for working with surfaces and objects with a temperature of up to 250 degrees.

• When it comes to working outdoors, where the temperature is low enough, it is better to use protective gloves made of a mixture of polyester and nylon... The product is covered with foamed latex and an acrylic yarn peel is used for the inside. These gloves are tear resistant and easy to work with outside. Often used by builders, they are great for road workers as they have a fluorescent fabric.

• Kevlar Knitted Gloves are distinguished by high cost, but they have a lot of advantages. First of all, they are not bulky, so they are light enough. Perfectly protect against heat, mechanical damage and cuts. This product attracts workers in workshops where they have to contact machines and process metal.

When looking for protective clothing, there are a number of characteristics to consider. As for fire resistant gloves, they have a letter designation. "A" indicates the resistance of the material to ignition and indicates the time it takes for the fading to occur on its own. "B" stands for resistance to contact with hot objects. The period of time during which the glove does not respond to thermal radiation is indicated by the letter "D".

It is important to pay attention to each indicator in the description of the workwear, including gloves. They always indicate the level of resistance to tears, punctures, high and low temperatures. The type of material affects the strength of the product, this should be taken into account.

To work comfortably with gloves, you need to choose the right size. To do this, you need a measuring tape to find out the girth of the palm at the base of the thumb. This number must be divided by 2.54 and then rounded. The resulting figure will help you find the gloves that are perfect for your hand size. The product will grip the wrist well, so there will be no discomfort.

Working in environments with increased health hazards must be done with extreme care and effective protection. The availability of workwear, which is offered in different versions, will not only allow you to perform your task correctly, but also provide comfort and safety. Heat resistant gloves are a great addition and their benefits will be appreciated.

How to choose heat resistant gloves, see below.