Characteristics and features of split systems LGEN

Ventilation and climatic equipment is produced by a variety of companies. But even with a variety of modern offerings, LGEN split systems can be an excellent choice for any consumer. Let's consider their characteristic features and nuances.

The split system is quite widespread. AL-20WND.

This device belongs to the Classic Luxe line:

• can serve up to 21 m²;
• in cooling mode, it delivers a power of 1.98 kW;
• in heating mode, it delivers a power of 2.14 kW;
• indoor noise no louder than 39 dB;
• outdoors, it makes noise no louder than 48 dB.

The designers have provided for the use of the control panel and automatic operation. Restarting also occurs automatically if necessary. There is a timer start, deodorization of the air flow, changing its direction. A warm start is not possible, the internal volume icing protection is active. Switching to night mode can be performed.

AL-20WNID - another good split system from the same manufacturer. It is also designed for an area of ​​21 sq. m. In this case, in the cooling mode, the power of the device is 2.1, and in the heating mode - 2.2 kW. The current consumption is 0.61 and 0.64 kW, respectively. The highest noise level is 35 dB inside and 48 dB outside.

This device has a night mode and a dehumidification mode. The split system has a plasma filter and a deodorizing unit. You can control the equipment from the remote control. AL-30GNID more powerful than previous samples - it can improve the microclimate in an area of ​​up to 27 square meters. m. At the same time, its power is 3.2 kW in cooling mode and 3.4 kW in heating mode.

Improved performance is achieved through much higher current consumption than in the previous model. It is 0.78 kW when cooling and 0.82 kW when heating. Important: this split system is unable to work as supply ventilation. But it can turn off by timer. The negative side AL-30GNID is that this split system is noisier than previous versions. Indoors, it creates a noise of 41 dB, and outdoors - 52 dB.

Alternatively, you can consider AL-75WND. This is a very powerful unit designed to serve 72 sq. m. at the same time. In cooling mode, the power will be 6.8 kW, and in heating mode - 7.05 kW.

Accordingly, the current consumption is 2.106 and 2.051 kW. The highest noise level reaches 44 dB inside the house and 57 dB outside. The split system can work in automatic mode. The equipment self-diagnostics function has been implemented. Automation will immediately turn off the device if it is connected incorrectly or the load is unreasonably high.

It should be noted that LGEN split systems receive very different ratings. They cool well, however, when starting and turning off, a strong crack may occur. But the devices work throughout the day without interruption. More frequent complaints should also be noted - about not very convenient consoles, about some cumbersomeness of the internal working unit. This is largely offset by an excellent set of modes and advanced functionality.

Positive ratings are associated with the following factors:

• the presence of inverters in a number of models;
• fast cooling;
• optimal ratio of cost and quality.

LGEN is registered in Switzerland. Despite the relatively recent appearance, she has already managed to gain credibility among buyers. In fact, Turkish and Chinese enterprises are engaged in the production of split systems. The brand's products belong to the budget category. The manufacturer himself recommends using it in apartments or small offices.

In addition to wall-mounted split systems, LGEN also produces mobile air conditioning units. They can be easily moved to the desired place if necessary. Monoblock split systems from this company will be able to operate at very low temperatures (down to -70 degrees). Therefore, stable action is guaranteed in temperate climates. The attractive feature of LGEN products is the ease of installation and the possibility of self-service without the help of specialists.

The instruction manual prescribes all the necessary information to enable the use of the remote control. The production of split systems in Asian countries cannot be considered a negative point. On the contrary, it is there that other concerns are increasingly transferring production. A delayed start option is provided for optimal protection of the equipment. Restarting is performed only when 3 minutes have elapsed after stopping the device.

Separately, it should be said about the device's remote control. It can be used to control split systems of the Aux brand. Standard indicators show humidity level, selected temperature, Feeling function activation, air flow direction change, timer and clock. A special button is dedicated to the control of the built-in fan.

Common mistakes when installing split systems are given below.