Japanese spirea "Anthony Vaterer": description, planting and care

Japanese spirea is an oriental beauty with an extraordinary highlander's ability to adapt to adversity. Even one single planted bush draws attention to itself due to its brightness. Such a plant can, without unnecessary efforts, almost completely change the appearance of the front garden, making it extraordinary, colorful and ceremonial.

Among the undersized representatives of Japanese spirales, "Anthony Vaterer" is revered by gardeners and designers for its unpretentiousness and high agronomic qualities. Despite its grace and beauty, this variety is able to withstand both urban gas pollution, moderate drought, severe frosts, and grow on barren land. Consider a brief description of the variety. "Anthony Vaterer" is a compact bush with a dense spreading crown, the height of which is no more than 1 m and the same diameter. The variety is valued for its long flowering from mid-June to September in bright pink with a purple tint or bright crimson color with large inflorescences up to 15 cm.Anthony Waterer stands out from its counterparts not only with beautiful flowers, but also with decorative foliage.

The plant is winter-hardy, capable of withstanding frosts down to -50 degrees. In severe winters, as well as in the absence of snow cover, the tips of the shoots can freeze slightly. However, the variety recovers very well. But the shrub should be planted in sheltered areas from cold winds. Annual spring pruning should be carried out to form the correct crown and the formation of young shoots. Deciduous shrub.

Japanese spirea is considered an unpretentious plant in planting and care. To achieve lush flowering and healthy development, it is necessary not only to properly care for it, but also to choose the right place for planting. The best time is spring. The event should be carried out in cloudy weather, and it should be planted in a well-lit place. Only in this case it is possible to achieve maximum decorativeness both in the color of the leaves and in abundant flowering.

The root system of the spirea is fibrous and grows quite intensively, so the plant receives the necessary nutrients and moisture only from the top layer of the soil. Therefore, for better growth, choose a place that is more spacious. Japanese spirea is relatively undemanding to the composition of the soil, but prefers to grow on slightly alkaline soil (pH: 7–7.5). If the soil is poor and heavy, before planting it is necessary to apply complex mineral fertilizers and organic matter in the form of humus or compost.

Buy bushes grown in containers, which increases the chances of successful rooting. If you buy seedlings with open roots, pay attention to their condition. They should not be overdried and damaged, shoots with live, but not yet awakened buds. To check for "freshness" use a simple method: shoots and roots should be slightly springy to the touch, while not breaking at the slightest touch.

Before planting the Japanese spirea, you first need to prepare the planting pit, a week before planting the plant.It should be one third larger than the volume of the root system of the shrub. A thick layer of drainage is laid at the bottom of the hole, consisting of broken brick and large rubble. The soil substrate for young seedlings should be nutritious and consist of humus, peat, sand and sod soil. The prepared soil mixture is thoroughly mixed. Remove dry, damaged roots, and shorten too long ones. First, you need to disinfect the roots by soaking them for several hours in a weak solution of potassium permanganate.

After carrying out the preparatory work, the bush seedling is placed in the hole, the roots are gently straightened, filled with a prepared soil mixture, carefully compacting it. The root neck of the spirea should be above the ground. After the plant is abundantly watered and mulching is carried out. A simple method prevents weed growth and does not allow moisture to intensively evaporate from the soil. The final stage of planting is feeding the plant with ammonia. It is carried out a few days after disembarkation and during the period of active growth.

It is not difficult to take care of Japanese spirea, even a beginner can successfully cope with such a task. The main thing is that the planting is done correctly, pruning and feeding are carried out on time. Many varieties thrive both in a sunny place and in partial shade. But the decorative leafy look "Anthony Veterer" requires bright lighting to maintain the rich color of the foliage. Despite its graceful appearance, the plant can grow in any soil, even the poorest. Spirea feels great on fertile, loamy with good drainage soils. However, it should be of moderate humidity, since the culture has a negative attitude towards stagnant water. Such inattention will lead to rotting of the root system and the development of fungal diseases.

The culture is quite hardy and able to withstand a short dry period. Weather conditions regulate the frequency of watering. In cool weather, one plant needs about 10 liters of water, in summer the amount of liquid doubles. Watering frequency - once every 2 weeks. The bush can have a small shower if there is a need to wash off the dust from the foliage. The procedure is carried out only in the evening or on a cloudy day to avoid burns on the leaves.

Mature specimens should be fed several times a year. The first is produced in the spring after pruning, the next in July before flowering. For better assimilation of fertilizer, apply in liquid form. After winter, spirea needs complex mineral fertilizers, in summer - organic. Periodic mulching with humus or compost allows you to enrich it with missing nutrients.

The soil around the root system must be periodically loosened to a shallow depth and weeds must be removed. The roots of the Japanese spirea need air to grow well. Pruning of the bush is also important, thanks to which the plant rejuvenates and stimulates abundant flowering. The culture is not afraid of strong pruning, which makes it possible to form the desired shape. To achieve lush flowering, pruning is carried out in early spring, before the buds swell. Old, damaged and dry branches must be removed. If the bush is too thick, it must be thinned out.

In obtaining new seedlings of Japanese spirea, they successfully use vegetative propagation methods: cuttings, layering and dividing the bush. These methods make it possible to preserve the varietal qualities of the culture with a 100% guarantee.

This is a time consuming breeding method that requires some experience. The procedure is carried out in late summer or early autumn. For this, shoots with 4-6 buds are taken. The base of the cutting is cut at a 45 degree angle. The lower leaves are completely removed, the upper ones are cut in half. After that, the prepared material is placed in water with the addition of a preparation that stimulates the formation of roots for several hours.

For this method, take 3-4-year-old specimens. The procedure is carried out in the middle of spring, when the threat of frost has passed. The roots are separated using a sharp pruner carefully. Each divided part should have at least 2-3 shoots. The roots should be slightly shortened and straightened in the hole, carefully sprinkling with earth. Delenki are planted in a permanent place until they take root and are provided with good watering.

This is a simple and effective breeding method for which a lateral shoot must be selected. In early spring, until the buds begin to dissolve, they are placed in a prepared hole and slightly dripped in. Layers are watered throughout the season. By the fall, they take root well. The next spring, the layers are separated from the mother bush and planted in a permanent place.

Despite its grace, Japanese spirea is quite resistant to diseases and pests. However, such pests as spider mites, aphids and leafworms can significantly spoil the appearance of the bush. Dry and hot weather promotes a strong reproduction of pests and their frequent attacks. The presence of the leafworm manifests itself in the form of damage to the foliage, the mite envelops the shoots with cobwebs, leading them to premature drying. Aphids damage young leaves and shoots by sucking the juice out of them. Treatment with chemicals contributes to the early disposal of pests and the restoration of deciduous mass.

Landscape designers appreciate Japanese spirea for its decorative qualities. It will fit perfectly into any garden style. The variety "Antoni Vaterer" is an irreplaceable decoration of alpine hills, rockeries, borders, flower beds and creates colorful pictures at the entrance of the building.

Very often, as a short, decorative deciduous and flowering plant, this species is used in group planting. Such an openwork hedge will give a special zest to the external appearance of the garden. The culture gets along well with other plants on the site. She is able to make friends with both hydrangea, rose, budley, euonymus, conifers and so on.

For information on how to properly care for the Japanese spire "Anthony Vaterer", see the next video.