How to make a bench from a shaped pipe?

Garden benches are different. Most varieties can be made by hand. We are talking not only about wooden, but also about metal structures. So, one of the most reliable and strong products are products from a profile pipe. In this article, we will look at how you can make such garden furniture with your own hands.

Today, garden furniture is presented in a huge assortment. There are shops of all possible modifications on sale. Designs can be both very simple and multifunctional, with additional elements and attachments.

The popularity of benches from a profile pipe is due to the many positive characteristics inherent in them. Many owners of private houses and summer cottages prefer to install just such structures on their plots. Let's take a look at the main advantages of profile tube benches.

• Benches made of shaped tube are quite lightweight. If necessary, the owners can seamlessly transfer such a structure to a new place without much effort.

• The material in question, taken as the basis for the manufacture of garden furniture, is easy to process. He is malleable, so it is very easy to work with him. This is a weighty argument in favor of products made from such material for those craftsmen who do not have rich experience in creating homemade products.

• A well-constructed bench made of a shaped tube is able to withstand significant loads without problems. Under their influence, the material does not begin to deform, does not lose its visual appeal and strength.

• The manufacture of such a bench will not cost too much for the master. If you want to beautifully decorate a garden plot, but spending a lot of money is not planned, then this will be an excellent way out of the situation.

• The profile tube bench can be of any design. Previously, the master will need to think carefully about how his homemade product will look like. Since the material is non-capricious and malleable, almost any design idea can be brought to life.

• The profile pipe is an environmentally friendly, safe material. It does not emit pungent and pungent odors, does not cause allergies, and cannot adversely affect the health of humans or plants growing in the immediate vicinity. Currently, not every material can boast of such qualities.

• A well-made bench from the material in question able to serve for many years without collapsing, without losing its visual appeal. At the same time, it will always withstand heavy loads and decorate the garden area.

• In operation, a high-quality bench will be very convenient and comfortable. It will not be difficult to build a structure with a spacious seat and a comfortable back. Households can have a good rest and relaxation on such garden furniture.

As you can see, garden furniture made of a profile pipe has plenty of positive qualities. However, it is not without its drawbacks. Let's get acquainted with them.

• Any structure assembled from a profile pipe requires protective treatments using multi-layer coatings. We are talking about a special primer, which is quite expensive and must be used in large quantities.
• The material in question is not subject to mechanical damage, but is prone to corrosion. To prevent its appearance, you will have to treat the structure with polyurethane, alkyd or epoxy paint. This procedure is carried out in conjunction with the aforementioned priming, therefore it requires extra costs.

Benches made of a profile pipe have no other serious drawbacks. All that usually repels the craftsmen is precisely the high cost of additional processing of structures.

Modern benches constructed from a shaped tube can be made in a wide variety of modifications. Craftsmen can design high-quality and beautiful designs in a variety of styles, shapes and colors. Let's figure out in detail what such garden furniture can be.

• The simplest to manufacture are classic models of benches made of a pipe with a square cross section. Such products can have a variety of shapes, but rectangular models with a back are traditional. Usually, wooden blanks are used as the back and seat.

• A country bench combined with a flower bed will be interesting. Such structures are often installed in suburban areas. They look beautiful and original. In the flowerbed attached to the shop, you can grow real natural flowers of your favorite varieties. It is especially pleasant to rest on such garden furniture.

• A shaped pipe can make an excellent corner bench. Such designs always look stylish and soundly, more people can sit comfortably on them. Often, a table is installed opposite the corner options.

• The design of a bench with a canopy will look no less attractive and cozy in the garden. The last detail can be supplemented with various sheet materials. Thanks to this addition, a cozy shade is created, which is often so lacking on especially hot days.

• A good bench made of a profile pipe can be built specifically for the gazebo installed on the site. Often, such designs are equipped with a table at which you can sit with friends and fully relax.

• More complex, but multifunctional is the frame base, made specifically for the subsequent installation of the swing. The role of the latter can be performed by a bench. Often these modifications are offered complete with a canopy.

A homemade bench from a profile pipe can be sustained in a variety of styles. It can be an elegant, classic design, or a more modern and rugged loft-style model.

Before starting all work on the manufacture of a high-quality garden bench, it is necessary to prepare all the necessary materials and tools. This is an important stage, here you must not forget anything, and foresee everything.

The GM must supply the following positions:

• a profiled pipe of a suitable diameter to form a frame base with all its bends (material with parameters 20x40 mm is suitable);
• boards - will be used to make the seat and back of the future bench;
• welding machine with electrodes;
• grinder to cut metal parts;
• drill;
• sanding paper or sander (of course, it is more convenient to work with the machine);
• level (laser and bubble devices are considered the most convenient);
• roulette;
• a plane to grind wood;
• paint for metal and wood processing;
• bolts and nuts by means of which the wooden components will be attached to the metal framing base;
• hammer;
• pliers.

If the product is planned to be interestingly decorated with forging elements, you will need to stock up on such components.

If you are going to use curved parts in the construction of a bench, it is advisable to prepare also such a tool as a bender. With it, you can very easily and quickly form the elements of the desired curved or rounded shapes.

If a decision is made to independently design a street bench from a profile pipe, then it is worth preparing for strictly step-by-step actions. First, the master will need to do the right preparatory activities.

One of the most important stages of work is the design of the future product for the backyard area. The master must think carefully about what kind of homemade product will be. You will need to develop its device, think over the form, design. All the features of the bench must be included in the project and drawing.

Only by competently and in detail preparing all the necessary project sketches, the master will be able to design garden furniture with his own hands, avoiding unnecessary mistakes.

It can be difficult to independently make a project for a future bench without having rich experience in such matters. If this is your first time encountering such work, you can rely on ready-made schemes.

As mentioned earlier, the profile pipe is a “docile” material and easy to work with.

Let us consider in detail what stages the technique of self-production of a garden bench without a back and with a back will consist of.

Benches are considered the easiest to manufacture, the design of which does not provide for a back. Consider the step-by-step instructions for assembling such a product.

• The first step is to prepare the legs of the future bench. The supports must be strong and reliable. If the legs are made incorrectly, then the structure runs the risk of going deep into the ground after a while.

• Having prepared the supporting parts, you need to weld the upper and lower jumpers from the profile pipe. They are welded to the base to make it stronger and more rigid. When the side parts of the product are made, they will need to be connected by means of longitudinal beams.

• Transverse crossbars are installed between the longitudinal supports, to which the seat from the board will then be attached.

• After the welding process, all the seams on the profile pipe will need to be thoroughly cleaned with a grinder. Then they are primed and treated with alkyd enamel in a couple of layers.

• Wooden elements of the future structure will need to be carefully sanded. It is advisable to use both coarse and fine-grained emery. It is recommended to handle areas near knots manually. For beauty, you can remove the chamfers.

• After finishing work on grinding garden furniture, its wooden parts are well primed, and then treated with impregnation or special enamel.

• This is followed by the stage of assembling a structure from a metal profile. First, you must carefully inspect the structure for defects and damage. If there are any, they must be eliminated immediately. Otherwise, the garden furniture will rust.

• The beginning of the assembly falls on the installation of wooden blocks on the support bases of the seat.It is advisable to first mark the crossbars. And also in the boards you will need to drill holes for the subsequent installation of fasteners.

• At the final stage of installation, the boards must be varnished if they were not painted.

Assembling a garden bench with a back is just as easy. The master can act on the same principle as described above. The only difference is that at the stage of installing the crossbars, you will need to build a base for both the seats and the back support.

Assembling a bench with a back from a professional pipe is just as simple. The difference with the classic model lies in just a couple of steps.

A bench for a garden or just a personal plot will look much more interesting and attractive if it is supplemented with various decorative elements. Let's consider in detail what decorations are suitable for decorating such garden furniture.

• The benches decorated with broken glass or shards of ceramic tiles look very original and bright. In most cases, such elements are installed on side bases so that people sitting on the bench cannot get scratched on them.

• The patterns cut by the incisors look elegant and soundly. The shops decorated in this way look solid and very cozy.

• If you want to decorate garden furniture in an original way, it is advisable to take a closer look at the pyrography technique. The master can burn out beautiful patterns on the structure using a special apparatus or a burning pencil. The method of decorating garden furniture with pyrotypes (stamping patterns is meant) will also be appropriate.

• Classic decor - beautiful forged details. These components can make garden furniture more sophisticated, graceful and attractive. A bench like this will attract a lot of attention.

If you are thinking of making a high-quality and beautiful bench from a profile pipe with your own hands, you should take on board a few useful tips and tricks.

• When choosing materials for future work, you need to pay attention to their quality. There should not even be a hint of rust on the metal. Take a closer look at the wooden elements. They must be free of any signs of decay, mold or any other damage. If there are any, you don't need to use them - they still won't make a good bench.

• Be very careful about the choice of paints and varnishes with which you will process the future homemade shop. It is recommended to use only branded compositions of impeccable quality, because the service life of garden furniture, as well as its attractiveness, will depend on this.

• When cutting all the necessary elements of the future structure, it is strongly recommended to take into account the size of the profile pipe itself. If you do not forget about this, then serious mistakes can be avoided.

• When assembling a homemade bench, carefully make sure that it is sufficiently flat, without distortions or uneven cuts. If you notice certain flaws somewhere, you need to get rid of them right away, otherwise there will be much more problems later.

• In no case should you neglect the treatment of metal and wooden parts of the homemade garden bench with protective compounds. Such procedures cannot be postponed until later, as materials can start to deteriorate surprisingly quickly and lose their attractive appearance.

• To make various elements for assembling a bench, it is recommended to use a profile pipe with a round or oval cross section. Such materials are much easier to bend, if necessary.

• Working with a shaped pipe involves the use of a welding machine. If you have no experience with such equipment or are afraid to make serious mistakes, it is better to contact a specialist. An experienced welder will easily cope with all the necessary work and will not make the slightest mistake.

• The design stage of the future structure plays one of the most important roles. At this moment, the master must consider not only the device and dimensions of the future bench, but also the features of its design. It is recommended to think carefully about the appearance of your homemade product. The bench must necessarily harmoniously fit into the local area, overlap with the rest of the objects. Only then will the courtyard in the country or in a private house look attractive.

• It is recommended to select special bolts for assembling the bench. Round and flat head fasteners work best. Such details will not touch the clothes of people who sit on the bench. Also, fasteners can be slightly drowned in the wooden canvases of the structure, but this will certainly affect the condition of the wood. She will become more vulnerable - this must be remembered.

• The master should know that profile pipes made from a material such as duralumin cannot be welded at all. Such materials can be connected exclusively by means of bolted fasteners.

• All protective compounds on metal and wood are recommended to be applied in a couple of layers. This way the foundations will be better protected.

• In assembling the bench, it is recommended to use only high-quality, serviceable tools. Poorly working attachments will significantly complicate the work and will not allow you to get even, neat cuts of the parts you need.

Next, see a master class on making a garden bench from a profile pipe with your own hands.