Tool belt: types and selection

Science and technology are developing by leaps and bounds every day in all areas. The same applies to the implementation of repairs and construction. Modern technologies make life much easier for the foreman, making the work easier, more comfortable and faster. To make the work of an electrician, carpenter, electrician, builder at a height or in hard-to-reach places more productive, a tool belt was invented.

Many professional craftsmen have been using this benefit for quite a long time and can no longer imagine working without it. But some novice workers have not heard of this yet. Or maybe they have heard, but they do not imagine all the benefits and conveniences that he carries in himself.

A tool belt is a fabric, nylon, leather, canvas belt with various accessories and pockets for carrying small equipment, such as a screwdriver, organizer with small parts and hand tools. It will not be superfluous to put a tape measure and a ruler, a pencil in it.

As a rule, when working at height, it takes a very long time to go down, select a tool and rise again. The same can be said about the productivity of work. Therefore, it is sometimes impossible to do without an improvised tool.

Most often, such a belt is extremely necessary for electricians, locksmiths, builders, electricians, home appliances repairmen, carpenters.

It is also needed by those who work at heights and cannot go down for the tool every time, as well as those who work in cramped conditions or in a hard-to-reach room, access or getting into which is difficult. A belt will also be needed for masters who simultaneously perform a set of works. This is such an unloading "assistant" for every worker.

In order to choose the right model, you should understand what tools, fixtures or parts you need to have on hand. It is very important to have a rough idea of ​​how many pockets, carabiners and compartments you need for your tool. Belts for a carpenter and fitter, for example, will be different, and this makes sense. Consider a few more additional tips for those who decided to choose a similar belt.

• It is important to use braces when wearing a belt to distribute the load evenly over the entire body.
• When working at height, it is better to choose a belt with side pockets and attachments for tools, for a uniform load and ease of work.
• Many belts allow you to load a variety of tools and devices, including construction ones. However, you need to think about whether all this will be needed, because when working with additional weight, fatigue comes faster.
• For those who work at height in the dark, belts with reflective stripes are provided.
• Belt bag - the so-called belt for tools, as a rule, has adjustable inserts, which allows you to change the width of the belt for workers of various sizes.

Today there are quite a few different models of belt bags. They all differ in their characteristics, material of manufacture and price. We will consider only the most popular models that deserve attention.

It is sewn from suede and textile, has an adjustable elastic band on the back for adjusting the width of the belt. There is a closable compartment for small items, the pockets are not very deep, which can be attributed to disadvantages. There are convenient attachments for tools to prevent them from falling out during work, as well as metal rivets that not only give the belt a stylish look, but also strengthen the pockets. All pockets and compartments are located at the front. Every millimeter of the belt has been carefully thought out for ease of use and space saving.

Suitable for a small amount of work. In online stores, this model costs about 1,000 rubles and ranks first in the rating of belt bags.

This model ranks second in the ranking. It is versatile, fits very well to the body. Looks like an open bag, attaches to the front. Has several zippered pockets and several open pockets. There is also a carabiner for attaching a larger tool. A wide shoulder strap is available for carrying outside of work. The belt is sewn of water-repellent material, it is very compact and at the same time quite roomy. Its only drawback is the price - in online stores it starts from 2 thousand rubles.

This belt bag has been designed for professional installers and electricians. Its weight is only 300 grams, made of polyester. There are hammer holders and various clips, as well as pockets for storing small fasteners, nuts, screws.

The cost in online stores is about 950 rubles.

This model weighs 600 grams, has 20 pockets and a hammer holder. Made of very durable synthetic material, suitable for both small installation work and for home use. When buying online it costs about 1070 rubles.

There is a Russian-made model among the leaders. Made of durable synthetic material, which makes it very durable. The manufacturer gives a whole 60 months warranty for this product, and the product weighs about 700 grams. Has a clip-shaped hammer holder and 19 pockets. Sold for an average of 1250 rubles.

Also in the rating there is another Russian model - HAMMER 235-001. Here the bag weighs only 300 grams, has a wide belt, strong and reliable lock. Quite deep compartments allow you to store more tools, and in places of special stress there are metal rivets. The fabric from which the belt bag is made is synthetic, impregnated with PVC and polyurethane composition, which makes the bag more durable and resistant to various chemicals and compounds, it is easy to clean. The price of this model is also very pleasant, only 850 rubles.

If you want to make the belt yourself and have sewing skills, then there should be no difficulties. Belts are made from tarpaulin, old army belts, old jeans, backpacks. Any sturdy belt will be the basis for our belt bag.

If you are using a wide army belt, then pockets and compartments made of thick fabric can be sewn to it on both sides. These pockets should, as it were, clasp the entire belt and be sewn in this position. First, you make the pocket you want.

If there are rivets on the jeans, then they will only strengthen the strength of the pockets.You can also sew on loops made of leather, durable fabric, straps of bags or a backpack, to which it is quite possible to attach a carabiner later to accommodate a larger tool. When making a belt, immediately provide for everything so that it is comfortable. For example, there will be a hammer on one side, a chisel on the other, or nails on one side, a hammer on the other. Also decide: the bag will only be in front or on the sides. If you chose the second option, then make pockets and fasteners for an even load.

If you are using your old jeans or belt, then it already fits your size. Otherwise, you must either shorten the belt to your size, or, if you are making it from fabric, sew Velcro / wide elastic to the fabric to securely attach the belt to the body. You can get inspiration on the pages of online stores offering similar belts, where you can also understand which fasteners and pockets will be needed and which will not.

The fastest sewing belt takes about 30 minutes. It always takes more time to prepare, because you need to think about what pockets and how much you need, as well as what shape the model should be. In addition, you will need to assemble carabiners, prepare a belt, jeans or an old bag or backpack, and put together an approximate image of the desired bag in your head.

You can always make a tool belt bag just for your needs, without spending a lot of money. And the fact that a homemade belt will become a faithful companion for many years is undeniable.

Tips on how to sew a tool belt yourself are waiting for you in the video below.