Features of channels 22

Channel is a popular type of rolled metal. It can be used to build a wide variety of structures. Today we will talk about the features of channels 22.

Channel 22 is a metal profile with a cross-section in the shape of the letter "P". In this case, both shelves are placed on the same side, this gives the product the necessary rigidity and strength. These parts are distinguished by high performance for various loads (axial, lateral, shock, compression, tear). As a rule, they have good weldability characteristics. These metal profiles have a minimum weight.

The channel is produced by hot rolling in mills. Most often, two types of steel are used for their manufacture: structural and carbon steel. It is rare to find models that are made of mild steel. U-sections are sometimes made of high-carbon metal on an individual order. Such elements are especially strong in bending. Yet they are designed to only pressurize the flat, wide part. The sides, which are adjacent to this side, significantly strengthen the product.

The main characteristics, dimensional designations can be found in GOST. Channel 22 St3 L has an internal size of 11.7 m. A running meter of a standard channel with a width of 220 mm weighs 21 kilograms. Profiles of this type can be used for construction, repair work. And also sometimes they are used in mechanical engineering, furniture industry.

These steel products are as strong and reliable as possible, they allow you to create structures that last for many years. In addition, such profiles are considered to be the most wear-resistant. In terms of stability, channels of this type can only yield to special I-beams. At the same time, much more metal is used to make the latter.

The assortment of such parts includes the following types.

• 22P. This variety is considered the most popular. The letter "P" means that the shelves are parallel to each other. The plus deviation in the thickness of the flange is controlled by the limiting mass of the part. The length of the 22P channel is within 2-12 meters. On an individual order, it can exceed 12 m. These profiles are made of steels of the following grades: 09G2S, St3Sp, S245, 3p5, 3ps, S345-6, S345-3. 1 ton contains 36.7 m2 of such a metal profile.

• 22U. The inner edge of the shelves of this part is at an angle. This type of channel is also manufactured from various structural and carbon steels. This rolled product is considered to be the most durable with the same wall thickness.

Most often it is used during various construction works. So, it can be used in the construction of frame houses, to strengthen a variety of load-bearing structures. Sometimes the 22U channel is also taken for laying engineering communications, during the construction of bridges, monuments. Parts of this type are also used in the machine tool industry. Sometimes channel 22 is also used in mechanical engineering. But most often in this area, profiles are used made of aluminum. These parts are also suitable for performing facade work, including for their restoration, for the formation of drains for water, they can also be taken as separate elements of the roof.

The channel is suitable for creating balconies, loggias. These parts are very common in the carriage and shipbuilding industries. They can also be suitable for creating water supply systems (when laying pipes). Channel 22 can be used for the construction of a variety of seasonal structures, including greenhouses, greenhouses, temporary garden buildings. Channels are purchased for the production of various special lifting equipment, including for cranes. For the assembly of lightweight metal structures without welding, such perforated steel parts are mainly used. In this case, bolted or riveted connections are used.

Perforated products are widely used in the creation of concrete structures, into which anchors or special threaded rods are pre-concreted. To save money, these products are often used as beams for floors. This option is perfect for creating pre-fabricated structures that will not be exposed to significant loads during operation.

The profile, which is used as a beam, must be fixed as rigidly as possible in the structure space, because it can tip over together with the entire structure.