How to insert a drill into a screwdriver?

An irreplaceable power tool in everyday life with a self-explanatory name, the screwdriver is actively used in construction work. The most common procedure with such a device is to replace the drill. Sometimes it seems that this process is very difficult and practically impossible. However, in fact, replacing a drill in a screwdriver will not be difficult, the main thing is to follow the instructions step by step and pay attention to the details.

A screwdriver means the same drill, but it has a lower rotation speed of the chuck and the ability to adjust the twisting force. Many hours of twisting and untwisting with their own hands have not yet given pleasure to anyone. The screwdriver will help you quickly and efficiently tighten and unscrew the fasteners. Also, using this device, you can make holes in materials of various densities - metal, wood and stone. The screwdriver is powered from the mains or battery.

The construction device is divided into the following types:

• standard;
• rechargeable screwdriver;
• drill screwdriver;
• wrench.

The "tail" of the screwdriver drill is fixed in the chuck. It comes in different sizes, just like the attachments. If the cutting tool is incorrectly installed, the screwdriver can damage the work process and harm your health. For example, due to the "wrong" drill, holes of different sizes with a damaged surface can be obtained. The sharp element will cause serious injury when it "leaves" the cartridge.

Most modern screwdrivers have jaw chucks. They consist of a cylindrical body as well as a sleeve and cams. When the sleeve rotates clockwise, the cams simultaneously press on the drill.

The process of replacing it is simple, but it has a number of individual characteristics. The whole process can be described as follows:

• it is necessary to select the necessary nozzle (bit) for the drill;
• then you need to take the cutting tool and install it in the center of the chuck (between the open "cams");
• after that, it should be fixed by turning the sleeve clockwise (with a key type cartridge, the key is installed in the recess);
• twist the sleeve until the attachment is secured.

It is not difficult to change the drill, but first you need to pull out the previous one. There are the following options for the development of the situation:

• standard removal of the drill (the chuck is not damaged);
• pulling out the drill in the absence of a key;
• removing a jammed cutting element.

With proper operation of the screwdriver, problems should not arise when replacing its working tool - the operation is elementary. To do this, you need to take the key, which is designed to loosen the cartridge, and insert it into the recess. Twist counterclockwise. Untwisting is carried out due to special teeth that are on objects. There is also another option for removing the drill. To do this, turn on the reverse rotation mode on the screwdriver, hold the outer case of the cartridge and press the "start" button. This way, the drill is easily released.

In the absence of a special key, the drill can be removed using a Phillips screwdriver or a nail. It must be inserted into the recess on the chuck and half of it fixed. We twist the opposite part of the cartridge by hand. However, if such untwisting does not work, then we take a gas wrench or a vice - these tools will help to increase the turning of the cartridge. If the previous options for pulling out the drill failed, then you should resort to "heavy artillery". In some cases, external damage makes it difficult to get the drill. In this situation, it is necessary to relax the "cams" with the help of gas keys and a vice. We completely clamp the cartridge with the keys and rotate (unscrew).

A radical option in the most hopeless situation would be to twist the cartridge from the screwdriver. To do this, it is necessary to squeeze it in a vice and forcefully knock out the cutting tool from the inside using a punch. Naturally, after such a procedure, the screwdriver should be taken to the repair. Summing up, it is worth noting that the procedure for inserting a drill into a screwdriver is quite simple and even someone who has never done this can handle it. The main thing in this process is to follow the recommendations.

For information on how to insert a drill into a screwdriver, see the next video.