Vetonit TT: types and properties of materials, application

There is a huge selection of plaster on the modern market. But the most popular among such products is the mixture of the Vetonit trademark. This brand has earned the trust of customers due to the optimal ratio of price and quality, affordability, and versatility. After all, various types of plaster can be used for wall decoration outside and inside premises, as well as for leveling the ceiling.

If you find that the mixture is sold by Weber-Vetonit ("Weber Vetonit") or Saint-Gobain ("Saint-Gobain"), then there is no doubt about the quality of the products, since these companies are the official suppliers of the Vetonit mixture.

The types of materials differ depending on the purpose for which they are intended: for leveling the surface or for creating decorative finishes outside or inside the room. Several types of these mixtures can be found commercially.

• Primer Vetonit. This solution is used to treat brick or concrete walls and ceilings.
• Gypsum plaster Vetonit. Designed exclusively for interior decoration, as the composition of the gypsum plaster is not resistant to moisture. Moreover, after processing with such a composition, the surface is already completely ready for further painting. The mixture can be applied both manually and automatically.

• Vetonit EP. This type of solution is also not moisture resistant. It contains cement and lime. This mixture is best suited for a one-time leveling of large surfaces. Vetonit EP can only be used on sturdy and reliable structures.
• Vetonit TT40. Such plaster is already able to withstand moisture, since the main component of its composition is cement. The mixture is successfully used for processing various surfaces from any material, so it can be confidently called durable and versatile.

• Appointment. Vetonit products, depending on the type, are used for leveling the surface before painting, wallpapering, installation of any other decorative finish. In addition, the mixture is perfect for eliminating gaps and seams between drywall sheets, as well as for filling painted surfaces.

• Release form. The mixture is sold in the form of a free-flowing dry composition or a ready-made solution. The dry mixture is in bags made of thick paper, the weight of the package can be 5, 20 and 25 kg. The composition, diluted and prepared for use, is packed in a plastic container, the weight of which is 15 kilograms.

• The size of the granules. Vetonit plaster is a processed powder, the size of each granule is no more than 1 millimeter. However, some decorative finishes may contain granules of up to 4 millimeters.
• Mix consumption. The consumption of the composition directly depends on the quality of the treated surface. If there are cracks and chips on it, you will need a thicker layer of the mixture to completely seal them. Moreover, the thicker the layer, the greater the consumption. On average, the manufacturer recommends applying the composition in a layer of 1 millimeter. Then for 1 m2 you will need about 1 kilogram of 20 grams of the finished solution.

• Use temperature. The optimum temperature for working with the composition is from 5 to 35 degrees Celsius. However, there are mixtures that can be used in cold weather - at temperatures down to -10 degrees.You can easily find information about this on the packaging.
• Drying time. In order for a fresh layer of mortar to completely dry out, it is necessary to wait at least a day, while the initial hardening of the plaster occurs within 3 hours after application. The hardening time of the composition directly depends on the thickness of the layer.

• Strength. A month after applying the composition, it will be able to withstand a mechanical load of no more than 10 MPa.
• Adhesion (adhesion, "stickiness"). Reliability of connection of the composition with the surface is approximately from 0.9 to 1 MPa.
• Terms and conditions of storage. With proper storage, the composition will not lose its properties for 12-18 months. It is important that the storage room for the Vetonit mixture is dry, well-ventilated, with a humidity level of no more than 60%. The product can withstand up to 100 freeze / thaw cycles. In this case, the integrity of the package should not be compromised.

Vetonit TT cement-based plaster mix has a whole range of positive qualities.

• Environmental friendliness. Vetonit brand products are completely safe for the environment and human health. No toxic and hazardous components are used for its manufacture.
• Moisture resistance. Vetonit TT does not deform or lose its properties when exposed to water. This means that this material can be used to decorate rooms with high humidity, such as bathrooms or rooms with a swimming pool.
• Resistance to external influences. The coating is not afraid of rain, snow, hail, heat, frost and temperature changes. You can safely use the composition for both interior and exterior surfaces. The material will serve for many years.

• Functionality. The use of the mixture allows not only to completely level and prepare the surface for further finishing, but also to significantly improve the heat and sound insulation qualities of the ceiling and walls. Customer reviews confirm this.
• Aesthetics. The dry mix has an extremely fine grind, due to which it is possible to create a perfectly smooth surface.

The cons of the product are not that numerous. These include the long final drying time of the mixture on the surface, as well as the fact that Vetonit plaster can crumble while working with it.

The mixture can be applied to a cement or any other surface with an average layer thickness of 5 mm (optimally according to the instructions - from 2 to 7 mm). Water consumption - 0.24 liters per 1 kg of dry mix, the recommended operating temperature is +5 degrees. If the plaster is applied in several layers, then you should wait until one layer is completely dry before moving on to the next. This will maximize the durability of the final coating.

The rules for working with Vetonit TT mix in general do not differ much from the features of applying any other plaster mix.

First of all, it is necessary to carefully prepare the surface, because the final result depends on this stage. Completely clean the surface of debris, dust and any contamination. All protruding corners and irregularities must be cut and repaired. For the best effect, it is recommended to additionally strengthen the base with a special reinforcing mesh.

Put the required amount of dry composition in a previously prepared container and mix it thoroughly with water at room temperature. It is best to use a drill for this. After that, leave the solution for about 10 minutes, and then mix everything again thoroughly.One package of dry mix (25 kg) will require about 5–6 liters of water. The finished composition is enough to cover approximately 20 square meters of surface.

Apply the solution to the prepared surface in any way convenient for you.

For a perfect leveling of the surface and completion of the work, you will need to sand the applied solution with a special sponge or sandpaper. Be sure to check that there are no unnecessary grooves and cracks.

Observe the rules of storage, preparation and application of the Vetonit TT brand mixture, and the result will delight you for many years!

You will learn more about the rules for applying the Vetonit mixture by watching the following video.