Venetian plaster: its features and scope

In the modern market, Venetian plaster is becoming more and more in demand. Designers singled out her for the ability to create an antique style interior. This article will consider the features and scope of this facing material.

The main distinguishing feature of Venetian plaster is its texture resembling a marble surface. To obtain this effect, stone flour is used as a base. Dust, consisting of granite, quartz, marble or other valuable rocks, forms the basis of the facing material. Then a binder is added - synthetic fillers. Previously, a mixture of lime and water was added to the composition, but this composition is outdated.

Natural dyes are replaced with artificial pigments that do not have toxic properties. Acrylic resins and synthetic polymers give color to the future coating. Venetian plaster is smooth if it contains fine particles. The surface structure can be changed by decreasing or increasing the size of the constituent parts. Together with the raw materials, the masters advise to purchase material for creating a protective coating - beeswax or its analogues.

The composition of the mixture ensures its mechanical properties, which distinguish this coating from other facing materials. Such a mixture is quite viscous and plastic, which allows not only masters to work with it, but also beginners. Color pigments have sufficient brightness, so the material can be applied in no more than two layers.

Plaster mixes differ not only in name and color. Manufacturers distinguish several varieties of this material, differing in the homogeneity of the composition. The quality of the future surface is directly related to the density and stickiness of the original product. The higher tack mixture will provide a better finish.

Plaster without dye is transparent, coloring pigment is added to it before use. The most popular finish is marble imitation. Designers love to use transparent material for a glossy finish. However, such a coating requires careful preparation of the rough surface. The finish is applied to both wooden surfaces and brickwork.

Depending on the technology of applying the wax, the plaster will turn out to be matte or glossy. If a layer of plaster is pre-leveled with a special device before applying a wax coating, then the future surface will shine. The matt effect is achieved by applying a thin layer of wax without pretreating the plaster.

Venetian plaster has a number of strengths and weaknesses.

Among the advantages of the master are the following:

• Environmental friendliness. Despite the fact that the composition of the Venetian plaster contains artificial polymers, it is not toxic.The covering can be used for cladding a children's room or living room. The material does not have a negative effect on the body, so contact with it is absolutely safe.
• Moisture resistance. Thanks to the wax-based topcoat, the plaster is reliably protected from contact with water. The coating does not absorb moisture and does not deteriorate, so it can be used for cladding rooms with high humidity.
• Impact resistance. The surface is resistant to deformation, capable of withstanding external physical impact and sudden temperature changes. The service life of the plaster reaches 15 years. The surface strength increases when interacting with a carbon mixture: a protective film forms on the surface.

• Color spectrum. The material can be of any color and different texture - it depends on the design idea and styling technology. To obtain the desired saturation or effect, you must add the appropriate dye. The effect of antiquity can be achieved by adding marble granules about two millimeters in diameter to the mixture. Plaster also allows you to create artistic painting, but this work requires the appropriate skills and accuracy.
• Ease of dismantling. Partial repair or complete replacement of the coating is not difficult to carry out. Due to the peculiarity of the appearance, the butt seams of the old and new coating are not conspicuous. The texture of the plaster allows for repeated replacement of the laid coating.

Apart from the obvious advantages, Venetian plaster has several disadvantages.

They must be taken into account when choosing this coating:

• A large expenditure of physical strength and time. High-quality installation of this facing material requires painstaking and long work. The rough surface must be leveled, and the mixture must be laid strictly according to the technology. The smoother the texture needs to be obtained, the more carefully the composition needs to be laid. Failure to follow the rules will lead to the formation of streaks and stains.
• High price. Quality material contains natural breed, so it is not cheap. The cladding made of cheap analogs looks too unnatural. In addition, the performance properties of the surface depend on the quality of the product.

The most popular plaster is "Veneto"... A characteristic feature of this type of coating is the effect of polished marble without gloss. The matte decorative surface is suitable for cladding any room. The advantage of such plaster is its low cost and availability. The coating does not require special operating conditions, so it is beneficial to purchase it in families with children or pets.

"Trevignano" - glossy plaster. The material creates a visual effect of interior lighting, creating a mirror effect on the walls. When stacked, the layers are half transparent, which allows you to superimpose several shades on top of each other. Such plaster will be an excellent solution for creating an interior in a classic style. The coating is in perfect harmony with the frescoes.

If it is necessary to obtain a rough marble effect, designers recommend purchasing plaster "Marbella"... The textured surface under the rays of light gives an unusual play of colors. The coating resembles velvet with glossy splashes or veins.

Materials with a matte surface are more popular in the market because they require less maintenance. Ensausto - a semi-matt finish, designed for those who are afraid of stains on mirror surfaces, but want to keep the shine.Reflective blotches make the plaster look like granite.

Acrylic plaster is made on the basis of acrylic latex. Such a coating is much easier to apply and is quite durable in application. The advantage of acrylic is that the surface can be made very bright. The water base allows the plaster to be tinted in various colors of any intensity. Such a coating is no less environmentally friendly than its lime counterpart.

Craquelure is a decorative plaster with a cracking effect. The crack network is obtained by applying a solution, taking into account a special technology. From above, the plaster must be coated with water-based paint to protect the surface from moisture. Cracks are obtained by blowing the composition with a hairdryer and subsequent contact with air. Cracks can be accentuated with a final wax application.

Based on the plastering technique, the following types of coating are distinguished:

• Classic. Traditional layering with marble chips is great for beginners. Designed for decorating large surfaces of walls or ceilings.
• Marble coating requires careful work to simulate natural material. High-quality detailing and accuracy in applying plaster to the rough surface are highly valued. This technology is used to decorate individual interior elements.
• Textured plaster is used not only to create the effect of stone material, but also to imitate a wooden coating. Skilled craftsmen are able to recreate leather from such veneer. It is better to leave the work with this type of material to the master.
• The mother-of-pearl coating is obtained by adding special particles to the raw mix. The blotches reflect the light, creating a matching sheen. Such material is used to decorate some elements or sections of walls.

Venetian plaster is used to create interiors in various styles. It will become a worthy backdrop of space. It is important to take into account that the coating will truly manifest itself only in conditions of sufficient illumination, therefore, the Venetian should not be used in dark apartments. The coating has been widely used in the creation of classic interiors, rooms in the Empire and Baroque styles.

It is customary to decorate the interior in the Baroque style with special pomp. They use plaster with imitation of a noble stone, but not monochromatic. It is important to select a strong and durable coating that can withstand prolonged loads.

When creating an Empire-style interior, designers advise avoiding rough masonry. The surface of the walls should be absolutely smooth with a slight sheen. An abundance of mirrors is welcome, so it is better to choose matte plaster. As in the Baroque, the Empire style cannot be imagined without stucco molding on the walls, so the wall covering must have the appropriate properties.

The classic decoration of the premises implies the absence of unnecessary details. The walls are finished with stucco with patterns. Installation of such a coating requires a lot of time and appropriate skills. The patterns can be replaced with a plain surface with an imitation of natural stone. The plaster should have a natural base and look natural. Preference should be given to coatings of light colors: beige or milky.

Geographically, Venetian plaster can be placed anywhere, but subject to some requirements. The most optimal room for decoration with this type of facing material is the living room. The walls of this room do not experience excessive stress and do not lend themselves to excessive moisture, therefore, no special requirements are imposed on the plaster.Also, when designing a living room, any stylistic restrictions are rarely introduced, so the color saturation and texture of the material are chosen at the request of the household.

For a large room, a brightly colored Venetian is perfect. It is important to remember that the room must be sufficiently lit even during the daytime. In small rooms, it is best to use light shades. The mirror surface will reflect light well, which will help visually expand the space. But do not overdo it with glare surfaces, give preference to matte plaster with sparkling splashes.

The application of this coating is labor intensive and time consuming, which makes it impossible for customers to frequently update the interior. The most profitable solution is to cover soft colors and imitate natural materials: marble, granite or wood.

Masters recommend paying attention to the installation of a stretch ceiling with Venetian plaster cladding. This design technique is quite new, so it did not have time to gain great popularity. It is worth noting the sophistication of this approach: a living room with a stretch ceiling stylized as an expensive stone material looks luxurious. However, this move is only suitable for rooms with a height of three meters or more. Small rooms with stretch ceilings seem flattened and uncomfortable.

Many are in no hurry to use "Venetian" for kitchen cladding. Designers advise against following stereotypes about the inexpediency of using this material. High-quality plaster has all the necessary properties for use, therefore it is suitable for finishing the kitchen. It is only important to take into account some of the conditions for the coverage.

The plaster must be resistant to foreign odors and not absorb them. The moisture resistance of the coating also plays an important role: the material must withstand short-term contact with water and wet cleaning of the room. During operation, the shade of the coating should not fade, and the surface should be covered with cracks. Also, the plaster must withstand sudden changes in temperature without visible consequences. To ensure all of these properties, manufacturers add special components to the dry mixture.

Despite the resistance of the coating to water, the craftsmen do not advise using plaster in the washbasin and stove area. Preference should be given to wall tiles. Due to its complex texture, it is quite difficult to wash the plaster from grease and dirt. Permanent restoration is not profitable.

When plastering a bathroom, preference should be given to a uniform glossy finish. The marble surface will decorate the room in a classic style, and the wet silk will create a beautiful iridescent finish. The surface of a complex structure can accumulate moisture, so there is a risk of mold and mildew. It will also be useful to apply an additional layer of enamel, which increases the moisture resistance of the coating. The protective layer will greatly simplify the maintenance of the surface.

You should not use relief in the decor of a small room. But a smooth luminous surface can visually enlarge a small room.

The decor of the corridor with Venetian plaster will enliven the apartment. The coating goes well with porcelain stoneware, so it can be used to line the entrance area.To avoid rapid contamination of this area, it is preferable to use materials with a dark palette. The combination of plaster with clinker tiles will be interesting.

This coating has a wide color palette and many shades, allowing to bring to life almost any design solution. Since coloring pigments are added to the composition in the process of mixing the mass, the intensity of the color of the future coating depends on the wishes of the customer. Plaster without admixtures is white and translucent. But such material requires careful processing of the base surface, so it is more convenient to paint the plaster.

"Venetian" well imitates the surfaces of noble stones of natural origin, therefore it is often given light tones with a predominance of some pigments. Gray, green or yellow-brown plaster is widely used in living room wall cladding. Light yellow shades help create an atmosphere of comfort and harmony.

For lovers of extravagant interiors and complex solutions, there is a black cladding. But such a coating is recommended for use only in spacious rooms. A very interesting solution would be to use a black coating with light transitions or streaks. The golden mesh of cracks will make the interior truly unique.

The three-color veneer is not used very often due to the increased complexity of the application. However, you should not avoid decorating walls with overflows and complex transitions. This finish is suitable for decorating a bedroom or children's room.

Despite the abundance of colors and textures of Venetian plaster, the sales leaders are still natural colors and stylized natural material. Eco-style is gaining more and more popularity: designers use decorative plaster even for decorating rooms in Scandinavian motives. Mixes of neutral colors are becoming real favorites on the market.

The performance properties of the coating may vary slightly depending on the area of ​​its application. For cladding surfaces in rooms with high humidity, it is necessary to pay special attention to the final coating: wax and enamel.

For wall decoration in the corridor and hallway, preference should be given to samples of increased strength. The entrance area of ​​the room experiences constant temperature drops, which increases its wear. It is necessary to select a material that is resistant to critical heating and cooling of the surface. Modern manufacturers create a "Venetian" on an acrylic basis: such a coating has greater strength, but an unnatural appearance.

Italy is the leader among material suppliers. Companies from this country create a classic coating, stylized as antique marble. The material is easy to apply, so it is suitable for use by both professional craftsmen and beginners. It is important to find material that does not require specific maintenance. Pay attention to the quality of the final coating.

When buying, you should pay attention to the brand and serial number of the product. It is not recommended to purchase plaster from different batches. The color of the finished product can vary significantly. To ensure the uniformity of the coating, the masters advise to mix the entire composition at once.

Venetian plaster is used exclusively for interior decoration of walls and ceilings of residential and public buildings. Such a coating does not tolerate critical temperatures and natural precipitation, therefore it is not used for cladding facades. Also, plaster is used for partial decoration of some elements. For example, a fireplace or columns decorated with "Venetian" look rich and can decorate an interior in the Empire style.

Due to its resistance to moisture, the coating can also be used in the decoration of baths and saunas. Many people use such a coating even in the pool, but it is worth paying special attention to the selection of wax and enamel. The performance properties of the surface will depend on the quality and thickness of the layer. The enamel can be applied in several coats to achieve the desired effect and finish.

The number of layers of "Venetian" can reach ten - it all depends on the design solution and the requirements for the future surface. Layers that simulate travertine or onyx can be applied. You can also use plaster for artistic painting. This technique has been used on the ceiling for a long time to create a visual effect. However, do not apply too much plaster to ceiling tiles - they are somewhat more difficult to dismantle than wall covering.

Before direct application of Venetian plaster, the rough surface should be carefully prepared. The material is applied to almost any surface, except metal and untreated wood. When plaster is applied to such a surface, it can crack and quickly crumble. For such places, an exclusively acrylic solution with a high concentration of adhesive pigments is suitable.

Ideal base for plastering - masonry, concrete blocks or plasterboard surface. Surfaces previously coated with oil paint are also suitable - their rough base ensures adhesion of the plaster layers. It is important to remember that surfaces must be durable. The roughing blade is cleaned of dust and other contaminants. Chips or protrusions must be repaired with a small layer of putty and then leveling the surface.

If the surface has been previously painted, then it is necessary to remove the obsolete paint layer. Seams between drywall boards must be glued and cleaned to get rid of height differences. If it becomes necessary to lay the plaster on a weak surface, then it is customary to reinforce it with a metal mesh so that deformation does not occur later.

Next, the wall must be covered with a layer of putty and sandwiched over it. It is forbidden to leave dust on the treated surface - it will reduce the adhesion of the layers of the future coating and lead to early destruction. Next, a layer of deep penetration composition is applied. The filling process and subsequent sanding must be repeated until the rough surface is perfectly flat.

The drying process depends on the humidity in the room and the air temperature. The more vapors in the air, the longer the drying process will take.

If the rough surface looks flat, and the differences do not exceed two millimeters, then you can start the process of laying the plaster. To prepare the future mixture, dry powder is used, which must be diluted with water in the right proportions. The resulting mass should resemble sour cream in consistency and be homogeneous. Next, the color pigment is poured.In order for the material to mix better, the craftsmen recommend using a construction mixer.

The first layer should consist of fine marble chips, subsequent ones may contain large inclusions. Each layer takes four to six hours to dry, so styling is time consuming. Glazing layers are necessary to obtain the intended pattern and also take time to dry. The advantage of plaster - the mass is easy to apply and spread without any effort. It is recommended to press the spatula to the surface at an angle of fifteen degrees.

You can get a dry mix of plaster yourself, knowing the proportions and recipe. But it is better to buy a ready-made one, because all the properties of the coating depend on its choice.

Correctly laid coating does not require special maintenance: the surface can be wiped with a damp cloth from time to time. It is important to remember that the coating does not tolerate interaction with solvents. Therefore, you need to carefully purchase a care product.

To create a coating with your own hand, you need the following components:

• Primer. This material is used for surface pretreatment. The primer technology has been described earlier. It is important to remember that the composition of the soil must include a quartz filler.
• Water designed for setting dry mix and getting a mass of plaster. Water must be poured into the mineral powder gradually so that the mixture does not turn out to be too liquid.
• Kohlers. Special coloring additives designed to obtain a coating of the required shade. Color pigments are added after mixing the main mixture. The first layer of plaster is applied clean, without the addition of coloring pigment.

• Sanding paper. It is necessary to stock up on sandpaper of varying grain size. First, coarse particles are passed over the surface, and the final grinding is carried out using fine-grained paper.
• Wax. The final coat can be liquid or paste. The wax is used to protect the coating from water and steam. It also gives the coating extra strength and protects it from dirt.
• Enamel. This material is placed on top of the wax coating in the event that the plaster requires additional protection from the effects of water.

For direct work with already prepared plaster, special tools are required. To apply the primer to the wall, you will need a spatula or roller. The choice of this or that device depends on the density of the mass and its viscosity. With a spatula, apply a thicker mass, evenly distributing the layer from the edges of the wall to the middle with smooth movements. A roller is more suitable for creating a smooth surface for a more flexible plaster.

Trowel - small steel shovel, which helps to distribute the mass over the surface. Unlike a putty knife, this tool is suitable for working on small parts or hard-to-reach areas. To work with Venetian plaster, craftsmen are advised to purchase a trowel with rounded edges to avoid rough marks on the resulting surface. Often the trowel is combined with a spatula, less often it is used as the main coating tool.

A trowel or a rule will allow you to get a truly flat surface. These tools are commonly used to obtain a smooth finish with the least amount of embossing. The roller is also capable of creating a flat surface, but working with it will take much longer.

Do not forget about dry rags for cleaning surfaces and tools at any stage of work. It is important to remember that even the smallest particles can affect the quality of the future surface and negatively affect its operational properties. A stepladder is necessary if you have to cover a wall or ceiling. The device must be stable, its serviceability must be checked before operation.

To obtain a glossy surface, the trowel will not be enough. Craftsmen use a special wax polishing machine. The kit should include a special nozzle that smooths the coating without harming the surface.

To obtain the required visual effect, the plaster should be applied in a certain way. The wrong technique can lead to a different visual effect than intended. You can experiment with alternating colored and transparent layers, or you can adhere to proven techniques for applying Venetian plaster to the rough surface. Consider several technologies for applying facing material.

To obtain a scaly structure, a layer of plaster from three to five millimeters is applied. The size of future flakes is directly proportional to the thickness of the putty. To imitate scales, vertical stripes are drawn with a spatula.

It is customary to cover a completely dried coating on top with a layer of paint. You can paint the scales themselves or the surface between them with shiny paint. It is important to remember that not every plaster will be coated with paint equally easily. It is necessary to familiarize yourself with the composition of the coating and purchase one that is intended for subsequent coating with paint.

To obtain a cave-like surface, a layer of plaster is applied with broad strokes on the prepared surface. To get small neat irregularities without harming the coating, the masters advise using a sponge to create an unusual semi-antique texture.

Another interesting surface treatment is to use a cover film, which must be removed from the surface after a day.

Any print or print will be made on soft plaster. When obtaining a putty of the desired softness, it is important to remember to maintain the density of the material. Too liquid plaster will not be able to adhere to the rough surface and will drain from it.

The rocky texture is perfect for decorating rooms in a classic style. The wall is evenly covered with a layer of putty about three millimeters thick. As the layer increases, the pattern appears more pronounced. This technique is also used in the decoration of window sills and fireplaces.

After installing the layer of plaster and until it is fully dry, the surface is covered with a metal trowel. A pattern imitating a rock surface is applied with slight pressure. Lines can be straight, but brush strokes look more interesting at a slight slope. Subsequent painting of the surface will visually enlarge the resulting "cracks", completing the image.

Designers advise to simplify the process of applying a pattern to raw plaster by wrapping the roller with an appropriate textured material. The resulting device is capable of covering a large surface at once, significantly reducing the time spent on achieving the desired visual effect.Experiment with the surface: wrap the roller with mesh or textured non-woven wallpaper.

It is possible to cover the surface with wax only a week after the application of the last layer of plaster. Wax can be selected both natural and its synthetic counterpart. On the modern market, you can buy an absolutely harmless coating made of artificial materials, which is not inferior in properties to natural components. Some artificial waxes are able to withstand even strong solvents.

Additional coloring agents may be included in the wax mixture. Applying wax to the final surface can give it a golden or pearlescent sheen. The wax should be applied in a thin layer, taking care to avoid sagging or peeling.

Further, the surface can be smoothed with a grinder, if there is a desire to obtain a perfect mirror surface. It must be remembered that streaks will be visible on such a coating, as on tiled masonry. Therefore, the resulting surface will require more careful handling and thorough cleaning than its untreated counterpart.

If you don't have a sander, you can smooth the coating with a soft cloth.

In cases where the result does not match expectations and the coating requires dismantling, the surface should not be allowed to dry. You should immediately apply the next layer until the intended texture is obtained. Otherwise, you will have to partially remove the layers and carry out operations for the preparation and leveling of the surface.

If the surface is partially deformed or damaged, then the defective layer can be carefully removed. Next, a little plaster is applied to the damage and a new layer is leveled. After complete drying, the surface can be cleaned with fine-grained emery paper. After stripping, the affected area is covered with wax and left to dry along with the entire surface.

The glossy surface allows the application of additional decorating layers. Thanks to the transparent base, you can create beautiful overflows of color. It is important to apply the color coat in a thin layer. The layers should partially overlap each other, and then level out. This will help create a smooth color transition without compromising the uniformity of the coating.

The thickness of the layers can be changed by pressing the spatula.

Experts recommend always keeping clean rags and containers of water close at hand. After use, all accessories must be cleaned immediately and the spatulas and rollers must be soaked in clean water. In the process of work, it is important to monitor and remove contamination from tools in time. Violation of this rule entails a violation of the plaster laying technology.

You should not adhere to one material stacking scheme and be afraid to make mistakes. The coating looks much more interesting with large gaps and a haphazard pattern. Venetian plaster is able to completely recreate the natural natural finish. But in nature, there is practically no clear consistent pattern. Therefore, do not be afraid to experiment with the coating.

It is important to constantly monitor the cleanliness of the sub-surface and applied layers. Due to the increased transparency of the coating, any contamination will stand out. Such contamination must be removed immediately. Also, dust grains impair the adhesion of the layers, which can lead to delamination of the coating during operation.Small debris can cause a network of surface cracks.

If the issue of using Venetian plaster as a facing material is still controversial, then you need to familiarize yourself with the real reviews of buyers who are already using this material in repairs.

Buyers note that decorative pVGT coverage based on natural marble chips, it has an affordable price and a wide color palette. Among the disadvantages of this material, customers highlight the lack of adhesion to the wall. The manufacturer offers this coating in any grain size, but customers recommend opting for coarse grain samples. This coating is distinguished by its richness and beautiful texture.

Venetian plaster can be purchased from domestic manufacturers. Buyers are satisfied with the work with the material made in Russia. The cover has a low price, so it is perfect for young families on a budget. Customers note that even for a small amount, you can purchase a high-quality material that looks like a natural stone.

Russian companies produce a coating that is conveniently applied in several layers. Buyers note the even texture of the applied coating, high-quality structure and a wide color palette. The material can be applied even in an area of ​​high humidity, it retains its properties throughout its entire service life and does not require special care.

To choose the appropriate style and method of applying Venetian plaster, you need to familiarize yourself with the work of other masters. Such analysis will allow you to find the best texture and inspire experimentation. Below are some design solutions for interior decoration using decorative plaster.

The light antique finish goes well with the wooden interior elements. Designers opted for ivory plaster to fill the room with light and visually enlarge the space. This coating serves as an excellent background for placing massive paintings in wooden frames and mirrors. The finished surface is painted with broad strokes: this effect is also used in the decor of wooden furniture.

When applying the material, the wax surface is not leveled to avoid the appearance of a mirror finish. Light-colored walls and corresponding furniture elements visually lengthen the room. A massive chandelier also looks appropriate: thanks to the high ceiling, its complex structure looks organic.

Venetian plaster is used as a cladding material in the design of the kitchen. An important nuance - plaster is not applied to surfaces that are constantly in contact with water. A wall covered with a rich green material creates some depth of space. This color is in perfect harmony with kitchen utensils and built-in appliances - the room looks modern and stylish.

Paintings and basics of the appropriate tone maintain the color of the walls and complete the image of the room. The sunny and summer kitchen pleases the owners at any time of the year, and the rich colors do not cause discomfort. The overhead light, reflecting off the glossy surface of the wall, fills the room with air and radiance.

Contrary to stereotypes, Venetian plaster can be used not only to create an interior in the classic or Empire style. Designers use this coating when decorating a room in a modern fashionable loft style. The cladding, imitating rough masonry, is the best possible combination with the metal elements of this direction.

The Venetian red brick finish serves as an accent color in the design of the spacious kitchen.The illusion of expensive stone is in harmony with the wooden ceiling and metal-like floor. The room looks cold and austere, as required by a loft. Due to its wide color gamut, this coating is best suited for maintaining the color composition.

To decorate the walls in the bathroom and the bathroom, a special waterproof plaster is used. Such a coating undergoes additional enamel processing and can last for many years without the formation of fungus and corrosion. The designers have created an unusually sophisticated image of the bathroom using Venetian plaster with a golden sheen. Thanks to its multi-layer structure, the coating looks deep and complex.

The matte surface is perfect for mounting a massive mirror in a decorated gold frame. Light marbled walls are combined with precious wood furnishings. The image is completed with small gilded details and stucco elements along the entire perimeter of the room. The surface of the plaster is not shiny because there are enough reflective details in the room.

Coarse-grained Venetian plaster is usually used to decorate corridors and loggias. The light coating is in harmony with the wicker surfaces of the furniture, creating an atmosphere of comfort and coziness. The tiled floor follows the texture of the walls, creating a single, light space. The masonry does not look rough, on the contrary, in the elements of the hallway there is a certain softness and smoothness of forms.

Wooden windows contrast with light-colored coverings, becoming the emotional center of the room. When light pours through the glass, it bounces off the creamy surfaces, filling the room with warmth. Color accents are set using colored decorative elements - pillows, bags and textiles.

Thanks to decorative plaster, complex patterns can be made on the ceiling and walls of the attic. Usually, a small room is visually enlarged many times over due to the use of a coating of light colors and soft shapes. The overhead light reflects off the intricate shape of the ceiling, creating the illusion of a "cave".

The appropriate material for decoration is chosen: the coating looks like real rocks on the seashore. To complete the interior, the floors are lined with spiral carpets. The stone statue against the wall will come to the image of the interior with notes of antiquity.

You can learn more about Venetian plaster from the video.