What is the difference between eco-veneer and veneer?

Everyone knows that wood is an environmentally friendly material that can be used in construction and furniture production. But at the same time, products made of natural wood are very expensive, not everyone can afford them. Therefore, most are considering more economical options, namely MDF sheets, on top of which veneer or eco-veneer is applied.

First of all, you need to understand what veneer is. This is a material that is the thinnest wood layers obtained by cutting them off a bar. According to the technical specifications, the maximum plate thickness is 10 mm. The veneer is made from natural wood. It is used for finishing furniture by applying sheets to the base and in the construction environment. Today, the production of both natural veneer and its analogue has been put on stream.

Natural veneer is a cut of wood that is not treated with paints and varnishes. For its manufacture, a patented technology is used, which involves the use of birch, cherry, walnut, pine and maple. The main advantage of natural veneer is its unique pattern. But besides that, it has many other advantages:

• a wide variety;
• aesthetics;
• resistance to loads;
• good thermal insulation;
• amenable to restoration;
• environmental friendliness and safety.

The list of disadvantages includes high cost, susceptibility to ultraviolet light and sudden temperature changes.

Eco-veneer in the production area is to the list of newest materials. This is a multilayer plastic containing wood fibers. Eco-veneer is considered a cheaper analogue of wood-based panels. The most remarkable thing is that the eco-veneer is dyed, so that the material can be presented in a different color palette. Most often, eco-veneer is used in the production of furniture, doors and facades.

To date, several types of eco-veneer are known:

• propylene film;
• nanoflex;
• PVC;
• using natural fibers;
• cellulose.

Eco-veneer as a material has a lot of undeniable advantages:

• UV resistance;
• water resistance;
• security;
• strength;
• low cost.

The differences between veneer and eco-veneer begin at the stage of materials production. Natural veneer is initially peeled from the bark and divided into small pieces. Then the wood is steamed, then dried and cut. To date, 3 types of natural veneer production have been developed, which are used after primary processing.

• Planed way. This method involves the use of round logs and sharp knives. The thickness of the finished blade is no more than 10 mm. To obtain an unusual texture, different inclinations of the cutting elements are applied.
• Peeled method. This method is used to create canvases up to 5 mm thick. They are cut with metal cutters as the wooden base rotates.
• Sawed method... This method is considered very expensive. It involves the use of cuttings that are processed using saws.

Having dealt with the veneer production technique, you need to familiarize yourself with the creation of its analogue. Eco-veneer is the result of continuous 2-belt pressing. Each layer of eco-veneer is processed separately.Calm pressure acts on the 1st layer. The load increases for each further one. Thanks to this technology, the possibility of the formation of air pockets is eliminated, due to which the technical characteristics of the finished material are improved.

To obtain a quality product in the process of its production, strict control of pressure and temperature... The 1st stage of production consists in the cleaning of wood raw materials and its shredding, the 2nd stage involves dyeing the fibers, the 3rd stage - pressing.

As you already know, veneer and eco-veneer have individual advantages and disadvantages. Consumers need to know the clear differences and similarities between these materials. There is not enough information that eco-veneer is synthetic, and veneer has a natural composition. So that in the future such questions do not arise, it is proposed to consider the detailed characteristics of these products by the method of comparison.

• Wear resistance... This parameter is the advantage of the artificial material. Eco-veneer is more stable, durable, practically does not get dirty, but if necessary, it can be cleaned with detergents. But when caring for natural veneer, it is forbidden to use aggressive chemicals. Otherwise, the surface will be irreparably damaged. In addition, the natural coating ages very quickly and does not absorb ultraviolet light.
• Moisture resistance... The basis for the veneer is MDF. This material is moisture resistant and tolerates temperature fluctuations well. Eco-veneer cladding protects the material from moisture damage. Natural veneer does not tolerate a humid environment. If the owner needs to install a veneer product in a room with high humidity, it must be covered with a moisture-resistant varnish.
• Environmental friendliness... Veneer and eco-veneer are made from environmentally friendly materials, but at the same time they have significant differences. Natural coverage wins in this matter. The eco-veneer contains synthetic substances that are also safe.
• Restoration... Natural veneer is easy to restore. You can even fix defects yourself. But if you need to fix complex damage, it is better to call the master.

After reviewing the information provided, it is impossible to immediately determine which material is better. An assessment of the anticipated operational requirements and budgetary capacity will help you make the right choice. The price of natural cladding is much higher than that of an analogue. In terms of pattern and texture, natural wood wins. The same goes for bump.

The veneer film is more susceptible to damage that cannot be repaired. However, in the color spectrum, eco-veneer has a wider variety than natural material.

For information on how eco-veneer differs from veneer, see the next video.