Choosing a spatula for a sealant

Without sealing and professional covering the seams and joints, there is no way to make high-quality installation of various kinds of finishing materials, as well as some structures of the external and internal type when carrying out certain construction works. Recently, hermetic compounds based on polyurethane, silicone and acrylic have become very popular due to their versatility and ease of use. For their application, a special device is used - a spatula for a sealant. Let's try to figure out what kind of tool it is, and how to use it to apply the above compounds to various surfaces.

The spatula is a small, handy and easy-to-use tool that fits easily in your hand. A plastic, rubber or any other spatula is a plate of a certain shape with several notches along the edges. Their presence makes it possible to create the contour of the seal seam, to give it a rounded or angular shape.

The device in question is also used not only to form seams, but also to remove excess material from the surface, which appears exactly when they are compacted.

An angled or any other joint trowel has a number of useful characteristics:

• small size, thanks to which it can be placed for storage anywhere;

• durability and the possibility of repeated use;

• versatility, because it can be used not only to align and create corners of the internal and external type, but also to remove excess material from the surface.

It must be said that such devices can be divided into categories according to the following criteria:

• shape and size;

• material from which they are made.

Let's say a few words about each of the criteria.

Manufacturers produce models of spatulas for grouting joints of various shapes, which allows you to choose the most convenient solution for a particular case. Most often, there are models on the market that are square or similar in shape with protrusions on each side. The corners are chamfered at around 45 degrees and have an additional protrusion. Such a simple design can significantly increase the efficiency of the device and make it as practical as possible.

With the help of such a tool, you can make seams that will have different contours, heights, thicknesses and other characteristics.

Note that there is often a small indentation in the center of the trowel, which makes it easy to hold the tool. The sharp edges of the spatula allow it to glide smoothly over the treated surface, while making it possible to adhere very tightly to the coating and easily remove excess sealant.

There are other models as well. For example, triangular-type spatulas are in great demand. They are convenient to use in cases where it is necessary to seal the joint in places that can be characterized as difficult to access.

This criterion is very important, because here not only the durability of the spatula will be an important point. The material should be selected in such a way that so that the sealant does not stick to the spatula surface and can be easily removed... But in practice, it often turns out that the spatula still needs to be treated with a certain substance. For example, to increase the effectiveness of a silicone model, it is better to lubricate it with soapy water beforehand.

Speaking specifically about materials, the models made of rubber and silicone are the ideal solution due to their high elasticity. In addition, they are less likely to crack and perfectly retain their original appearance. But spatulas made of rubber and plastic are not so practical. The reason is susceptibility to deformation. But they also have an advantage - increased density, which is why many craftsmen prefer to work with them.

A set of spatulas can come in handy when construction work is carried out all the time on an ongoing basis. If a person is a professional builder or finisher, then he can purchase a set, which usually contains 10-11 types of spatulas. In principle, they are designed for use by professionals.

And if the repair is done only at home, then it is easier to buy a set with 3-4 fixtures.... This option will be better because there are different models where there are no handles or they are. You can find kits where fixtures from various materials are present. For example, from rubber, rubber and plastic. In this case, a person will be able to find the most suitable tool for himself or a particular place.

If we talk about the manufacturers of spatulas and similar devices, then it should be said that both domestic and foreign brands are represented on the market. Among domestic companies, it is worth mentioning brands such as "MasterPlast", "Polytex South", "Our Instrument". In addition, a large number of tools produced in our country are not labeled for some reason. For the most part, domestic spatulas do a good job with the responsibilities assigned to them.

If we talk about the products of foreign manufacturers, then there are a lot of them on the market. Particularly distinguished by the quality of the spatulas the Belgian brand Soudal, the Startul Master company from Poland, the Polish company TOPEX, the German companies OTTO Fugenfux and Storch... Most of the above models are distinguished not only by the high quality of workmanship, but also by the materials used for their manufacture, which ensure the durability of the spatulas. It should be mentioned that there are many products and companies from China on the domestic market. But their quality will be somewhat worse than that of the products of European and Russian manufacturers.

If we talk about how to choose a spatula for silicone or any other sealant, then first you should pay attention to the material. As mentioned above, the category of fixtures in question can be made from:

• rubber;

• silicone;

• rubber;

• plastic.

Depending on the surface to be treated, this or that solution may be more effective than others. The same should be said about the fact that the second important criterion will be the surface to be processed. If it is more or less soft, then you can use a spatula made of a harder material, and if it is hard, then vice versa.

The third important point is what kind of sealant will be used. Different types of materials have different densities and viscosities. This also needs to be taken into account when choosing a spatula.

Another important aspect would be relief the spatula itself.This or that option may turn out to be a decisive moment, which will allow you to apply, indeed, a beautiful and even seam, which will complement the design and interior of the room where the work will be carried out.

The next important point is processed surface. For example, when working on wood, it is better to use a rubber or silicone tool. This will prevent the wood from scratching when applying the sealant.

The last important factor that can influence the selection of a particular instrument - inaccessibility of the place that will need to be processed... If it is, indeed, difficult to access, then the dimensions of the instrument itself, as well as its surface, will come into play.

Only taking into account all of the above factors will allow you to choose the ideal solution for each specific case.

Seams made of sealant are a great alternative to plastic corners for tiles. The latter usually does not fit very tightly to the tile, which is why debris and water get there. And the corner with grout begins to crack over time. By applying a sealant and a specific spatula, this problem can be solved. To do this, arm yourself with a silicone sealant of a suitable color and cut off its nose at a 45-degree angle. The diameter should be chosen slightly larger than the width of the seam, which will need to be done.

Armed with them, you should first check the condition of the surface where the sealant will be applied. It must be clean. Moreover, it should not be wet. Now, using a gun, it is required to squeeze out the sealant along the corner with an even layer.

Next, you need to moisten the surface with a separator. This is necessary so that when removing excess sealant, it does not stick in unnecessary places. The divider can be made with water and plain soap. Better if it is liquid. The proportions should be approximately the same as when creating soap bubbles.

After that, use a spatula and carefully remove the excess sealant. During the removal process, it is required to clean the spatula from time to time. Excess sealant must be removed in a special container.

At this, the seam will be ready, and all that remains is to let it dry.

Well, let's say how you can make an outer corner of silicone using a sealant. The technique is suitable for short corners. Long ones will be better made from special corners.

First you need to glue masking tape with a thickness of 2-3 millimeters from the corner edge. After that, you should apply silicone sealant to the corner. When this is done, it is required to carefully remove the excess sealant with a spatula. In this particular case, it is not necessary to wet the sealant with the separator. And also, without waiting for the substance to begin to harden, it is required to remove the masking tape. This completes the creation of the outer corner with a sealant and a spatula.

For information on how to choose a sealant spatula, see the video below.