Double wardrobe

Each person strives to ensure that the interior of his apartment or house meets the most modern trends. It should have a lot of space, and the furniture placed should be stylish and functional. Therefore, bulky items give way to more modern furnishing elements, namely, a two-door wardrobe.

A modern functional wardrobe has a number of undeniable advantages. To accommodate this piece of furniture, very little space is required, which is especially important for small apartments.

The double-leaf version can be placed in a room that has a niche, ledges and other unsightly layout elements. To do this, you can choose both the case version and the built-in model.

The design of a double-leaf cabinet, or rather its sliding doors, allows you to significantly save precious space. Thanks to the compartment mechanism, the doors move in a plane, parallel to each other, in contrast to the version with swing doors, which require additional space to open.

All modern double-leaf models have a certain set of internal elements that contribute to the competent distribution of clothes and shoes. If desired, it can always be supplemented with modern mobile structures, which make it much easier to find the right thing and place a larger amount of not only clothes, but also bed linen.

There are many models of cabinets with 2 doors, belonging either to the cabinet version (frame) or to the built-in (panel) type.

The basis of the case version is a frame consisting of two side walls and two parts that form the top and bottom of the case, as well as the back wall, made mainly of fiberboard. From the inside, the frame is divided into two parts by a partition. The facade is represented by two sliding doors.

The elements of the case are made either from natural wood or from chipboard with a certain coating. The latter can be veneer, which is a thin layer of natural wood or cheaper options such as melamine or laminate.

The front or front side of a double-wing wardrobe consists of two sliding doors. Each door consists of a door leaf and a frame. Depending on the model, chipboard, MDF, mirror, glass, plastic can be used as a door leaf.

Double-wing wardrobes also differ in the door suspension system. Exists:

• double rail system with upper support and lower guide;
• double rail system with lower support and upper guide
• monorail system.

Depending on the facade, there are different models of sliding wardrobes with two doors:

• Models with a glass front come in different versions. The tinted glass used in the decoration looks very light and effective. Photo printing on glass looks beautiful, there is an opportunity to choose a drawing for your interior. A cheaper option is a film applied to glass.

• A model with a mirror will visually expand the space. On the mirror facade of some models, a pattern is applied by sandblasting, which adds individuality and lightness to the interior.

• Models with a plastic facade look very dignified and modern.

A built-in two-door wardrobe can have a different design, which depends on its location. If it is necessary to place it in a niche, then the structure will consist of two doors that form the facade and guides. Side parts are not needed, they are replaced by the walls of the room.

If there is one wall, then the structure will have a slightly different look. The second wall is usually made of laminated chipboard. The result is a combined version, where part of the structure is built-in, and the other is hull.

In addition to rectangular shapes, wardrobes with two doors are also corner ones. In shape, cabinets with two doors can be diagonal, triangular and trapezoidal.

In order to properly install a wardrobe in any space, it is necessary to take into account the dimensions of the room where the product is planned to be installed, as well as the location of sockets, switches, window and door openings.

Having determined the place for the future cabinet, it is necessary to start measuring, paying attention to three points: the main part, the right and left sides. This must be done so that the wardrobe is level without distortions. Otherwise, the sliding door mechanism will not work properly.

When placing the cabinet version, special attention should be paid to measuring the floor and walls, and when installing the built-in model and the ceiling. You need to measure the floor level in the place where the cabinet should be located from one wall to another. A difference of more than 2 cm is considered significant and requires correction.

By the same principle, the wall to which the cabinet will adjoin is measured. With a drop of more than 2 cm, it is advisable to install a special vertical extension bar 5-7 cm wide. It is installed between the wall and the sidewall of the cabinet model. The plank itself is trimmed from the side of the wall to match its curvature. You can do without the addition - just do not push the cabinet tightly against the wall.

A sliding wardrobe with two doors is an irreplaceable thing in a modern interior. There are many interesting solutions for its placement.

In the hallway, it will look equally good as a simple cabinet-type wardrobe, located along the wall, and the corner option, which allows you to make full use of useless corners. Both products will perfectly match with additional rounded modules. As an additional element, there can be shelves located at the end of the cabinet, or a wall hanger with a curbstone.

Facades, as a rule, are installed either completely mirrored or combined with other materials. You can make one part mirrored, and the other from the same material as the body.

In the room, the wardrobe can be installed as a free-standing element or built into a niche, if there is one.

In the bedroom, you can place two identical wardrobes along the wall, leaving a certain distance between them, and install a bed in the resulting niche.

The wardrobe can also be installed on one side of the opening. You can build a partition that will separate the cabinet from the opening.

You can also install a built-in corner version of a wardrobe in the bedroom, especially if the room is small. A corner wardrobe with a diagonal or trapezoidal shape, if desired, can be supplemented with modules. A wardrobe with a corner arrangement, made in light colors with glossy or mirrored facades, can visually expand the space.