Choosing self-tapping screws for concrete without drilling

In construction, it is often necessary to drill through hard concrete surfaces. Not all construction devices will be suitable for this. The best option is considered to be special self-tapping screws for concrete, which not only make indentations in the material, but also act as reliable clamps. Today we will talk about what features these products have and what types of such screws exist.

Self-tapping screws for concrete allow you to make holes in the material without pre-drilling... Outwardly, they look like ordinary screws. Such products are made of solid and extra strong steel.

Hardened steels give the fasteners high strength. Together with an additional protective coating, they become the most hard, wear-resistant and reliable retainers.

Such self-tapping screws have non-standard threads. Its structure changes along the length of the tool, which ensures the most reliable fixation of the device in concrete.

GThe head of these products is often made under the "asterisk" or under the "cross". These options are considered the most convenient, because in the process of screwing in, you have to make significant physical efforts, and ordinary splines often do not withstand the load and fly off. But there are also models made with "hex".

Self-tapping screws for concrete without drilling are made with the most pointed tip, which easily fits into a dense concrete structure... The attachments are reusable.

Typically, the tip is tapered. This makes it possible to easily screw the tool into porous concrete surfaces without pre-drilling.

Depending on the type of head, all self-tapping screws can be divided into several independent groups.

• Countersunk head varieties. Such models most often have a tapered design with cross-type splines. To work with such a variety, you first need to prepare a seat. To do this, you need to make a small chamfer, which will allow you to place the butt so that it is in the plane of the material. Models with this head structure will not protrude from the concrete surface after installation. Today, versions with a reduced head are available. They have a smaller diameter, provide a more reliable fastening, but more effort should be applied when installing them.

• Self-tapping screws with "hexagon". These types are quite simple to fix in the material. Most often this type is used for large structures with a significant mass.

• Models with a semicircular end. These varieties are often used for joining and securing thick and durable materials. But at the same time, their head has a convex shape, therefore, after installation, the product will protrude slightly above the surface of the concrete structure.

Self-tapping screws can also be subdivided into separate categories depending on their protective coating. Many models are produced with a special oxidized coating. The latter is in the form of a thin oxide film, which gives the details a black color.Such options are able to withstand significant loads, but at the same time we must not forget that they should not come into contact with moisture during operation.

There are also models coated with phosphated compounds. These varieties, like the previous version, will be colored black. They are also able to fix material of significant weight, while they have good resistance to water influences. The cost of such models will be higher compared to other types.

Galvanized self-tapping screws for concrete can be white or yellow, but at the same time they practically do not differ from each other in important properties. These models are most often used to install products that will be located in the open air, since these self-tapping screws are especially resistant to various atmospheric influences.

Self-tapping screws are also classified depending on the material from which they are made. The most common option is high strength, high quality carbon steel. Such a foundation is considered to be quite strong. Most often it is used together with impurities.... In addition, this metal is particularly durable. Fasteners made from this metal are relatively inexpensive.

Also, ordinary stainless steel can be used for the production of such self-tapping screws.... This material will become the best options in the event that further contact of fasteners with moisture is possible. After all, models made of such material will not rust and will not lose their properties.

As a rule, self-tapping screws made of alloy stainless steel are not covered with additional protective coatings. Indeed, in the composition of such a metal there is nickel and chromium, which already provide excellent anti-corrosion properties of products.

There are also special types decorative screws... They are most often made from wood, plastic or various non-ferrous metals. But such samples are extremely rarely taken for concrete surfaces, since they cannot withstand too much stress.

The sizes of self-tapping screws for concrete can be different. They are chosen depending on the thickness of the surface and on what diameter the holes should be made.

Tools can have different thread configurations.

• "Herringbone". This type is a slightly oblique thread, which is formed by small metal cones nested into each other. The herringbone model most often has a cross section of 8 millimeters.
• Universal... Such a thread on a self-tapping screw can be used with or without a dowel. As a rule, the tool is available in sizes up to 6 millimeters.
• With an inconsistent pitch of turns. These variable-pitch specimens provide the most reliable fastening of materials, while additionally performing notches. It is this type that is more often found on self-tapping screws without drilling. The standard value for the diameter of such devices is 7.5 millimeters.

The length of these devices can vary from 50 to 185 mm. The depth ranges from 2.3 to 2.8 mm. The height of the cap reaches values ​​of 2.8-3.2 mm. The diameter of such self-tapping screws can be from 6.3 to 6.7 mm. The thread pitch also plays an important role. For different models, it can reach a value of 2.5-2.8 mm.

Before buying suitable self-tapping screws for concrete, you should pay special attention to some aspects. So, be sure to carefully examine the quality of workmanship and coverage of fasteners.

If in the future the clips come in contact with water, it is better to select models covered with special compounds that protect against the harmful effects of moisture. The surface of the elements must be flat, without chips or scratches. If there are even small irregularities on the thread, then the quality of work will be low. Products with such defects will make uneven holes, poorly fix the material.

When choosing, pay special attention to the size of the fasteners. If you will fix bulk concrete surfaces with a large thickness, then it is better to give preference to elongated specimens with a large diameter. Such varieties will not only be able to firmly fix the structure, but also provide maximum durability of fixation.

In order for the self-tapping screw to be able to screw in firmly enough into the concrete and ensure a strong fixation of the entire structure, you first need to check the material itself. If the concrete is "loose" and crumbles a little, then you should first make a small depression at the point where the device will be inserted.

The self-tapping hole can be made with a Phillips screwdriver. If it is not there, take an awl, but it is better not to use a drill. The recess made will not allow the element to go to the side during installation. It will be fixed strictly perpendicular to the surface.

In the process of screwing in, the self-tapping screw will begin to delaminate the material... When installing fasteners, some rules must be taken into account. Remember that the length of the anchor should be significantly less than the thickness of the concrete. Otherwise, the tip of the fastener will simply end up on the outside of the other side.

Depending on the density of the concrete base, the distance between the individual self-tapping screws without drilling should be between 12 and 15 centimeters. If you fasten the edges of concrete products, then a small distance should be retreated from it. It should be twice the length of the retainer itself.

The following video shows you how to drive a screw into concrete.