Vinyl siding: pros and cons

Vinyl siding is the most popular category of exterior materials. He appeared on the market not so long ago and has already managed to win a wide audience of fans. Before buying this material, you should study the pros and cons of the new product.

Vinyl siding has a special composition, 80% of which is polyvinyl chloride. It was this ingredient that gave the product its name. However, there are manufacturers on the market who reduce the amount of PVC by up to 70% in order to lower the cost of the material itself. This method has a negative impact on the technical performance of the siding. But such products are also in demand, as some buyers are attracted by the low price.

The titanium dioxide content reaches 10%, and this component is located in the upper layers of the material. This ingredient is responsible for the stability of the structure. And also the additive allows the material not to change the light, since titanium dioxide prevents the harmful effects of sunlight.

Other additives that are present in vinyl siding are contained in lower doses and are aimed at increasing mechanical strength. The list of components contains different pigments that are responsible for the color scheme of the material.

Vinyl siding has many benefits, which should be consulted before purchasing.

• Long service life. The manufacturer of this material provides a guarantee for its goods, which is several decades.
• Affordable cost. Vinyl siding is cheaper than metal siding.
• The main advantage of such siding is its versatility and attractive appearance. With the help of this material, you can sheathe any object, no matter what raw material it is made of. The product will help to hide many of the wall imperfections and add attractiveness to the room due to its beautiful colors.

• Facade panels are resistant to mechanical stress and negative climatic conditions. Positive characteristics are observed at temperatures from -50 to +50 degrees.
• PVC is not afraid of insect attacks. And also this product is not prone to mold and mildew.
• Ease of installation work and low weight. The installation of this coating does not require the use of additional preparation and an ideal base.
• Preservation of natural ventilation. The panels provide full air access to the wall.
• Fire safety. Due to the reagents that are present in the composition of the material, the toxicity of the siding is reduced. It does not burn, which the plastic analog cannot boast of. PVC begins to melt, but it does not support the combustion process.

• Easy care.Such material does not require regular staining and specialized processing every year. The chosen color will delight your eye throughout its entire service life. An ordinary hose is enough to clean the facade of dirt.
• PVC has thermal insulation properties.
• Many users choose this finish as the product is environmentally friendly.
• A wide range of textures. You can choose a finish that closely mimics wood, stone, wet plaster and more.
• Due to the locking mechanism, you will be able to install the panels yourself.

Despite its many advantages, PVC has disadvantages.

• The panels cannot be repaired. If one of the areas is damaged, it must be replaced. In this situation, metal siding is better.
• When installing, you will need to take into account the likelihood of panels contracting and stretching due to temperature extremes.
• If you do not have the necessary skills that are required to install the cladding, it is best to seek professional help.

In addition to a rich list with advantages, some requirements are set for the material, which it must necessarily comply with. On the territory of the Russian Federation, there is no GOST declared for this material, there are only generalized parameters. As a basis for the designation of standards, the recommendations of ASTM, an American company that deals with materials testing, are used.

There are several characteristics according to ASTM requirements.

• Profiles should be 0.9-1.2 mm thick. If you are counting on a long material life, you should pay attention to the maximum thickness.
• The facade has the ability to maintain its primordiality and original dimensions. These qualities are regulated by ASTM D6864, DD3679, D7251 standards.
• The material is acid resistant. For testing, a solution of sulfuric acid was used, which acted on the material for a long time. In two weeks, the siding has demonstrated its maximum durability.
• Flammability of the material. The casing does not support the combustion process.
• Strength limits in relation to the effect of temperature are equal to 88 degrees Celsius.
• Tensile strength indices are equal to 422 / kg / cm2.

Vinyl siding has a wide range of uses. It can be used for interior and exterior decoration of premises for any purpose.

This material is used to work with the basement of the house. The product is sold in the form of short blocks, which are thick when compared to standard sheets. Despite the increased dimensions, the basement panels weigh a little, which makes it possible not to carry out measures to strengthen the facade of the room.

PVC panels are sold in various variations, you can purchase a material that imitates natural stone or decorative brick.

Such products are intended for finishing on a horizontal surface. Manufacturers are ready to offer their audience smooth panels or variations that imitate wood.

There are several types of vinyl wall panels:

• single herringbone;
• double herringbone;
• triple herringbone;
• ship timber;
• block house.

But also due to its qualities, vinyl siding is used for cladding buildings outside. The material has high performance characteristics, which allows it to gain great popularity.

There are various shades of PVC siding on the market. For lovers of warm shades are presented: peach, olive, red and other tones. Many buyers like this calm color scheme, but other original options can also be found on sale.

Light oak cladding, red-brown vertical siding, crimson are popular. The choice remains only with the buyer and depends on his idea and preferences.

To simplify the selection, PVC siding is divided into several categories:

• white tones;
• colored;
• pastel.

White and bright sheathing is often used for decorative components and edging. Such elements are able to favorably emphasize the basic pastel tone.

Basement siding is considered an exception. For the plinth cladding, imitation of bricks and other natural materials is used. The panel is available in beige, gray, sand or terracotta colors. They are optimally combined with walls in a natural shade, so that the design of the house looks logical and complete. Some buyers choose to clad the façade with imitation brick.

If you like block house decoration, manufacturers are ready to offer natural motives. There are pistachio, creamy, caramel and banana colors on sale. When choosing panels, make sure that they match the roof of the house. When choosing the same shades, you run the risk of facing the fact that the building will look dull.

If you are purchasing PVC siding from a reputable company, the manager will offer you to use the service, which consists in the selection of shades. Do not rush to refuse such an offer, as specialists will be able to correctly select the appropriate option for your premises. With the help of a special computer program, you can preliminarily familiarize yourself with the exterior of your house after sheathing with vinyl.

It may seem to you that the selected shade looks faded, but you should listen to a specialist who is familiar with the features of the panels and how they will look in practice. The vibrant colors are used to highlight the individual architectural components in an advantageous way. Pay attention to the contrasting shades: delicate sand panels combined with brown, pale pink paired with terracotta and other similar compositions.

You need to be serious about choosing the color scheme for the future cladding of your home, since the panels will decorate it for decades, and you cannot change the color. Make sure that the chosen material blends harmoniously with the environment and looks pleasant. Choose a color scheme that will not bother you after a few years.

To make the right choice, you should familiarize yourself with the basic laws of combining shades. Win-win options include beige and brown palettes, sand, terracotta, burgundy and yellow tones. For confident personalities, bolder combinations of orange, blue and purple are suitable.

Vinyl siding installation can be done even by a beginner. To correctly sheathe the facade of a building, you will need to familiarize yourself with the procedure and installation features. The panels are flexible and flexible, so the risk of material damage is minimal.The step-by-step instructions that are present in this article will allow you to perform the facing work correctly and eliminate common mistakes.

The cladding is done using the required set of tools.

• Knife. Cutting vinyl siding should be done with a sharp knife. When working, mark the groove, then bend and unbend the marked line several times. As a result, the material will break at the intended mark.
• You can use an electric jigsaw instead of a knife. This tool allows you to make a beautiful cut and speeds up the process of fitting to size.
• Perforator. This tool can be replaced with a drill. He creates high-quality holes that allow you to fix hardware or create new ones.
• The screwdriver is designed for twisting hardware.
• As with any construction work, a laser building level should be prepared. You can use a simple level, but the first option is more comfortable.
• Construction tape. This tool allows you to calculate the parameters.

If you decide to use a grinder for cutting panels, take into account some of the features of operation. At high revs, you will experience heating and melting of the cut. To eliminate this phenomenon, it is recommended to work at low power.

There are certain installation recommendations.

• When facing work, you should pay attention to the features of the material. The panels have a high coefficient in relation to linear expansion. This indicator requires the fulfillment of the requirement, according to which a gap of 5-7 mm should be located between the strips and rows.
• If cladding is made at subzero temperatures, the minimum gap size should be 10 mm.
• There must be a gap between the working surface of the panel and the fasteners.

• It is not allowed to screw the siding through with self-tapping screws. Such actions can lead to the fact that the sheet begins to crack. If you need to use these tools, ensure fixation is not in the place where the holes for the nails are punched, but create holes for the hardware, only then fix the elements.
• Instead of self-tapping screws, the use of nails and staples is allowed.

And you should also take care of the selection and calculation of the required components. Brands that offer vinyl siding to their customers are involved in the implementation of all the components that are required for installation. You can also purchase additional materials.

• Internal and external corners, which will be required for cladding buildings with a traditional length of 3 meters. To calculate the required amount of material, you will need to calculate the total measurements along the perimeter of the corners, which should be further divided into three. Eliminate the use of leftovers to keep the exterior of the building attractive.
• The starting bars are 3.8 meters long. The required value is calculated by subtracting the door openings from the perimeter.
• The J-profile will be needed to work with areas where annex attachments are observed.
• The plank that frames the windows is 3 meters long. The calculation is carried out by adding the total perimeter of the window openings.
• Ebbs for windows are optional and are placed only if necessary.

• The finishing strip is required to connect the eaves to the house itself.
• The H-profile allows you to close the gaps at the joints that are between the panels. These elements are mounted vertically. Calculations are made by dividing the perimeter of the room by the length of the panels.
• Drain strips are mounted under the window opening.
• Platband installation is required for facing any opening that is flush with the walls.
• To make your own vinyl siding cladding, you need galvanized self-tapping screws with a press washer. The length of the elements should be 25-30 cm. The number depends on the area of ​​the wall. One square meter requires 20 pieces.

The installation of vinyl panels is accompanied by the following sequence:

• installation of the corner strip;
• fastening the starting bar;
• installation of a J-profile, which will act as a finishing material for the edges of the panels;
• window opening sheathing;
• facing work with the vinyl itself;
• installation of the finishing strip.

The installation of the starting strip must be carried out around the entire perimeter of the building. You will need to carefully expose this element. The bar should be attached using self-tapping screws. Observe a distance of 25 cm when fastening. Make sure that the screws are perpendicular to the surfaces. Self-tapping screws must be screwed in exactly in the center of the oval hole in order to exclude bending of the panels.

It is necessary to ensure that the self-tapping screw does not enter the bar to the end. The gap between the cap and the panels should be about 1 mm. For more comfortable calculations, you can measure the gap with a coin. In the center of the junction of the planks, a gap of 5-7 mm must be left.

Window openings, which are located in the same plane with the walls, must be sheathed with a wide casing, into which the panels are later inserted. If there are slopes in the windows, you can use a corner profile for decoration. First of all, it is recommended to sheathe the lower slope, and then start working with the side sections, gradually moving towards the center of the window opening.

When working with vinyl siding, care should be taken to ensure that each panel fits into the starter bars and can snap into place. Only after observing these rules can you start fixing with hardware. When fixing the panels, you should constantly check using the building level. For comfort while working, you can use a rope.

The finishing strip should be fixed under the roof itself. Measurement should be made from this bar to the outermost panel. The strips processed for the specified parameters should take the shape of an arc, and then go under the finish panel.

There are many vinyl panel manufacturers in the construction market. If we talk about the domestic market, the products of the plant have been in demand for more than 10 years. "Terna Polymer"... The manufacturer has been known since 2001 and has been producing vinyl siding under the name Fineber.

The material is popular because it has many positive qualities.

• The production is aimed at the Russian climate, therefore the panels are highly resistant to humidity and temperature extremes. The facade is able to withstand the temperature range from -50 to +50 degrees.
• In the production of siding, only high-quality PVC elements are used, in which there are additional ingredients aimed at color stability. The proportions of each component are calculated using computer programs.
• Co-extrusion is used in the manufacture. This method is an economical and rational technology for the production of raw materials from two layers. A specific set of components has been added to each layer. For the outer surface, elements that protect against external influences and burnout are used. The inner layer contains ingredients that determine the structural properties and quality of the facade. A similar technique is common in Canada and the United States.
• Products of this brand have a long service life, which is more than 25 years.

A Canadian company is in demand among foreign manufacturers Mitten inc, whose production facilities are located in Paris. Trademark Mitten has been making siding for over 50 years and offers high quality products, thanks to which it has taken a leading position in the world in product sales.

The features of vinyl siding include the following properties:

• the manufacturer provides a 50-year guarantee for its material;
• panels are highly resistant to shades;
• resistance to mechanical stress;
• high plasticity, which allows installation even in frost.

And also it is worth noting the domestic manufacturer Grand Line... Its production facilities are located in the Voronezh, Kaluga, Nizhny Novgorod and Leningrad regions. The panels have unique characteristics, due to which they are in high demand.

Features include a number of properties.

• Resistance to external influences and flexibility. The performance is six times the performance of traditional siding. These qualities allow the installation even at negative temperatures.
• Externally, the panels are similar to real wood. There are even knots on the material that allow you to imitate natural wood as much as possible. The casing is impregnated with special dirt-repellent components.
• Arrangement with a locking mechanism provides increased resistance to wind and makes it possible to install in a short time.

• PVC siding is UV resistant. The period of immunity reaches nine years, which is confirmed by special tests that were carried out in Holland.
• The manufacturer provides a written guarantee for its product for a period of 50 years. The list of warranty obligations includes: strength indicators, long service life and uniformity of fading. In order for the product to fulfill all the declared properties, the requirements for transportation and installation must be observed.
• Vertical panels are available to buyers. They are used for cladding individual elements on the surface of the façade. Many people use this type of siding to decorate basements, decorative ledges, cornices or awnings. The length of the material is 3 meters, and the useful width reaches 1.5 meters. The color scheme consists of four tones, including: white, vanilla, light green and beige.

Vinyl siding is very popular, so on the Internet you can find numerous reviews of the owners. Most buyers speak of this material as a quality product that looks good in business.

The Fineber brand has won a large audience, which is confirmed by positive comments about this material. People who decide to purchase products from this manufacturer report that the material is of good quality, rich and uniform color that does not fade over time.

Mitten attracts many consumers with its warranty. Users report that the manufacturer guarantees a service life of 50 years, which they are confident after several years of use. Even after five years, siding does not change its appearance, retains color saturation and does not fade from constant exposure to sunlight.

Grand Line has a beautiful appearance that qualitatively imitates the structure of a tree. With its help, you can create a beautiful facade that will delight you for a long time. Customers speak positively about the ease of installation, which is provided by the locking mechanism. The material is not afraid of strong winds and is resistant to other weather conditions.

There are many manufacturers on the market that offer vinyl siding to consumers. To make the right choice, you should read the recommendations of specialists.

These tips and tricks will help you choose a quality product.

• Pay attention to the coloring of the siding. It should have a uniform color. The saturation of hues on the outside and inside may differ. In most cases, the interior is lighter in color.
• The end cut must have the same thickness across the entire width of the material. If the indicators differ, you are offered a substandard product.
• The holes for attachment to the base must have smooth edges. Make sure they are the same.
• There should be no defects on the front. Discard the purchase if you notice cracks, scratches or peeling. The material must have a matte surface, as gloss is considered a defect. If there is a strong sheen on the panel, it will begin to heat up from exposure to sunlight, which will lead to further deformation.

• The thickness of the material should not be more than 1-1.2 mm, since thicker options are not able to guarantee the same performance properties as other panels.
• Choose panels with anti-hurricane locks. They are able to guarantee the strength of the structure.
• Check the plasticity of the panels. To determine this property, you need to bend the thin edge of the material that is next to the edge. If it starts to break, refuse to buy.
• Packaging can also speak of the quality of the selected product. Manufacturers who produce quality goods, monitor the safety of siding, therefore, provide high-quality packaging.

After purchasing vinyl panels, you may be faced with a situation in which the material does not fit your size. In this case, you will need to cut the siding. Many people find it difficult to cut off the end cuts that will be required to secure the material. You will need to recreate these cutouts in the remaining area. You will make it easier for yourself if you cut the bottom of the siding.

Proper care will prolong the life of your vinyl siding.

Experts recommend following simple rules.

• Beware of the damage that various insects can inflict.
• When installing, try to create high quality thermal insulation in order to save on the heating process.
• Vinyl panels must not be painted. The panels initially have a certain shade that covers the front and the inside of the material. The color does not peel and scratches are invisible. These properties do not imply painting measures during operation.
• Panels may become paler after ten years of use. If you are faced with a similar situation, you just need to replace the defective area.
• The panels should be cleaned once a year. Use a special washing machine, or take a regular hose and clean the siding with a jet of water.

Designers are ready to offer many options to transform your home and make it more attractive. To choose the necessary design, you should build on your goals, wishes and the interior of the surrounding landscape.

Siding houses are attractive. A room lined with light pink panels looks gentle. Such a building will give the site a calm and peaceful atmosphere and never get bored.

An elegant finish with vinyl slatted siding, which imitates a shipboard. You can combine two types of siding, using imitation masonry for finishing the basement. Such cladding will show the good taste of the owner of the building and will stand out from other houses.

Some people opt for shades of white, which give the buildings a certain English-style feel. Such rooms look elegant, gentle and fit well into any design.

If you want to turn your home into a fabulous tower, pay attention to the siding imitating a rounded log. Take care of a suitable landscape that will help create the necessary atmosphere.

Partial vinyl siding looks good. You can highlight individual elements with panels to create an original look.

On the contrast of colors, you can get an original composition. Choose contrasting shades that look great when paired. With this design, you can highlight your room and draw the attention of others to it. Choose your colors carefully so that the combination looks great.

See below for more details.