Pegs description and tips for using them

Garter pegs are a common method of supporting many crops. From the material of this article, you will learn about their features, varieties. In addition, we will show you how to use them correctly, and, if necessary, do it yourself.

Garden pegs are used when growing plants that need extra support. With their help, herbaceous types of crops are strengthened, in which large flowers and fruits are formed. These are supports for the garter of low, medium and tall plants, they:

• provide protection from wind and rain, weighing down shoots and foliage;

• neutralize the load on the main stem during the growth of ripening fruits;

• open bushes to light, sun and air;

• simplify the spraying procedure, increase its efficiency;

• simplify pinching bushes;

• make the load on the plant even;

• promote uniform and healthy ripening of fruits.

The supports are not universal: they differ in diameter. This allows you to choose an option that can withstand the load of different types of tied crops. Their height can be 60, 80, 100, 120, 150, 180, 200 cm. The average diameter varies from 6 to 12 mm.

The bush holders do not damage the plants. They are installed at the same distance from each other. They are used as an alternative to trellis nets, tying bushes of different heights and organizing planting sites. They increase the vigor of growth and development of bushes, prevent their damage.

The cost of the supports depends on the size, raw materials of manufacture, as well as on other characteristics. The stakes keep the bushes upright. This allows you to save space on the garden bed and increase yields. They make it easier to care for your crops. Allows you to plant more bushes in a relatively small cultivated area.

The stakes are immersed in the soil, depending on their type, the supports are used for climbing flowers, grown seedlings of trees, berries (for example, raspberries). They are bought for growing tomato seedlings. They are taken to increase the yield of cucumbers, peas, ornamental climbing plants. High garden stakes are tied up with currants, blackberries, grapes. Small pegs are used for tying roses, undersized climbing crops.

They differ in the degree of strength and durability. They are sold in gardening, building and specialized stores. The package contains 10 (20) elements of identical length and thickness. The most common products are modifications with parameters: 600x6, 800x8, 1000x8, 1200x10, 1500x10, 1800x12 mm.

Products made from other materials are sold by the meter. The price per running meter is different. It depends on the diameter, application (different for short, medium, tall). Varies from 13.3 to 30-50 rubles per r. m. In this case, the stakes can be ordinary white or colored green.

Garden stakes do not require special storage conditions. They participate in the natural growth and movement of plants, and are easily stored. Some types are easy to clean.

When attaching the stems of crops grown, gardeners use stakes from different materials. The most common raw materials for poles are wood, metal, fiberglass and plastic. The starting material determines the properties of the stakes, their advantages and disadvantages.

Both natural and synthetic composite rods for the garden and vegetable garden generally have an optimal service life and can be used repeatedly. The only exception is bamboo sticks - these pegs are susceptible to moisture and ultraviolet light. They are not as practical as wooden supports.

Modifications made of composite materials are frost-resistant and 9 times lighter than their metal counterparts. They can be used to tie and grow all kinds of plants. Moreover, they are not destroyed by the use of fertilizers. They are not interesting to vandals: they do not burn in a fire, they cannot be scrapped.

Purchased wooden pegs are conveniently shaped wood sticks with pointed ends. Farmers consider these supports to be the best of all varieties. In the absence of a budget, wooden stakes can be made with your own hands, using branches of a suitable size that remain after the autumn pruning.

When branches are used for tying, the bark is first removed from them. If this is not done, the sticks will give roots during use. The length of these stakes varies. The advantage of the props is environmental friendliness, however, during operation, the wood becomes damp from moisture.

Metal stakes are rarely bought for garters. These supports can withstand the power of growing bushes, the weight of large-fruited crops. They are taken for tying vegetables grown in greenhouses. Some modifications have an anti-corrosion coating. Thanks to this, they can also be used outdoors.

However, metal stakes without a protective coating are susceptible to rust. They are not suitable for arranging open garden beds. Some legs have a pointed end for easy immersion in the soil. Sold in sets, and sometimes as fittings. They are easy to install and convenient to use.

Plastic supports for plant garters are not as strong and reliable as wooden and metal counterparts. However, they are quite aesthetic and neat. The advantages of the material are inertness to decay, moisture, deformation, reasonable price. Sometimes there is a metal rod inside such elements. This makes the metal-plastic supports stronger and more reliable.

Fiberglass supports are considered strong and durable. They are quite powerful, but not heavy, easy to install and remove. Stakes made of fiberglass reinforcement do not bend under the weight of plants. They are resistant to damage, rust, chemicals.

They are sold twisted into a ring, the length of the reinforcement is 50 m. The rods are cut after unwinding the roll, carefully unfolding together. Saw the material with a hacksaw for metal.

The garter of the plants must be neat and correct. The speed of work and the efficiency of cultivation depend on this. According to the rules of comfortable growth and development of plants, an individual peg is installed for each seedling or cultivated bush.

The planting stakes should be 20 cm longer than the height of the plant to be strengthened. At the same time, the depth of immersion in the ground, equal to about 25 cm, is also taken into account.This is enough for a stable position of the stake.

To properly tie a seedling of any culture, you need to use a rope or cord. The main stem is tied to a peg, the ends are crossed or tied with a figure eight. So you can tie an apple tree, tomatoes, peas, grape vines at the initial stage of cultivation.

There are two ways to use stakes for garters in a greenhouse: vertical and horizontal. For branched and climbing bush crops, take high stakes. At their ends, a rope or wire is attached, tying the cords along the length and lowering them down.

You need to put a horizontal garter for weaving crops by driving stakes along the sides of the garden. 2 rows of rope are stretched between them. If necessary, the design is supplemented with vertical rows of threads. This method saves stakes and provides high yields.

If the ground is hard and dense, you can use a sledgehammer to hammer in the peg. It is easier to immerse the stake in loose soil - for this you just need to press on it.

With a traditional garter, the stakes are placed at a distance of 10-15 cm from the main stem of the plant. Submerging a stake in the ground nearby can damage the crop's root system. The maximum immersion depth in the ground is 30 cm. Do not install more than one peg per bush.

If the garter is carried out in a conical manner, in addition to stakes, wooden hoops of different diameters are used. Stakes (3 pcs.) Are immersed in the ground at an angle with expansion. In this case, the seedling is located inside the created structure. The hoops are tied at the same distance from each other. This system protects the bush from recurrent frosts.

The material for the manufacture of the rod is of great importance during installation. For example, fiberglass cannot be driven into the soil. Otherwise, it may delaminate. It is necessary to fix the stem of the bush taking into account its future thickening. You cannot wrap the stem in one place: the winding should be a loose, elongated figure eight.

Some crops do not withstand stakes using wire. It is better to tie them with cloth strips or soft rope. It should be borne in mind that, depending on the characteristics of the development of the cultivated culture, the garter to the stakes must be carried out several times per season. For example, tomatoes have to be tied 3-5 times.

Stakes for garters of plants can be made from scrap materials without special skills. For example, an ordinary board 7 cm thick and 15 cm wide is suitable for their manufacture. The bars are marked on it, then they are cut with a saw along the outlined lines.

To prevent the plants from breaking from the jagged edges, they are treated with coarse sandpaper. The ends of the sticks are sharpened at a 45 degree angle. Sticks that are too thin cannot be cut: they will not support the weight of the plants, they can bend and break.

Someone uses ordinary shovel cuttings instead of stakes. Others take pickets from an old fence.

For information on how to make garter pegs, see the next video.