Making garden arches with your own hands

The arch belongs to the universal elements of architecture, because it has not only decorative but also functional properties. The garden structure is easily made by hand. In this case, you can use a variety of materials, most of which are quite affordable. You just need to think over all the details in advance so that the result does not disappoint.

The garden arch not only decorates the space, but also supports the plants. It is very important to carefully plan everything and prepare the drawings. They will help you correctly calculate the material and make installation with ease. In general, when building an arch, you should be guided not only by your preferences. There are such norms.

1. The structure must be strong and reliable. The arch is under significant stress. The weight of the flowers is quite large, the flimsy structure will quickly "give up". In some cases, it makes sense to even make a small foundation for sustainability.
2. The height is chosen individually, but gardeners recommend choosing between 2-3 meters. This will give the flowers the space they need.
3. The width should be impressive, not less than 120 cm. This is important, because the support supports plants that curl and have developed roots, strong shoots.
4. The frame must be beautiful, not just strong. In winter there will be no flowers, but the structure will remain. Do not neglect this moment, otherwise the whole aesthetics of the garden will be lost.
5. Colors and materials should match the overall style. This is not a strict rule, but rather a recommendation.

The dimensions should be carefully considered.

The drawing is already ready, the necessary parameters are outlined - it's time to clearly determine the location. Of course, the arch can be placed anywhere, but there are so-called successful options. The structure can hide the facades of utility rooms or some kind of inventory.

Other interesting ideas.

• Recreation area at the dacha in a remote corner. In this case, the arch can be connected to a bench or garden furniture.
• As the centerpiece of a garden or to highlight the most beautiful flower beds.
• Immediately after the gate or in front of the gazebo, as an entrance decoration. You can also put it in front of the steps to the house or where the garden is separated from another area of ​​the yard.
• For track decoration. In this case, several arches are usually installed, imitating a tunnel.
• Less often, a full-fledged gazebo is equipped with several arches. Quite an expensive but effective option.

Separately, it is worth considering the layout if you want to make an arched integration. So the structure can become part of the fence. Moreover, there is no need to use the same material, combinations are permissible. Sometimes such a textured difference becomes the main highlight of the courtyard design.

A bench or bench can be integrated into the arch arch. This is usually done with structures made of metal or wood. At the same time, the arch itself is often equipped with a visor, which over time is also covered with flowers. The composition can be finished with a lamp or lantern, a pair of decorative pillows.

The arch on the porch is admirable. The facade of the house becomes especially solemn with such a decorative element. You can integrate not only the arch, but also something into its structure. This allows you to expand the functionality. The addition of containers with flowers that do not curl looks especially interesting.

In fact, the design of an arch for a garden is limited only by imagination and budget. The homemade design is so good that anyone can make it.

The choice of material is a serious and responsible business. Arches are made of wood, stone, metal. Each option has its own characteristics and advantages. Sometimes some of the materials are already at hand, then the choice is obvious. In other cases, you should simply compare the options.

• Wooden arch. Usually it is done not ogruzny, but rectangular. Although it all depends on the skills of working with wood and the possibilities in general. A natural arch is suitable for a garden with any design.

• Stone arch. It is important to take into account the functional load on the structure. Usually, such an arch is used purely as a decorative one, without plants. Flowers can destroy the integrity of the entire structure, and this is dangerous.

• Metal arch. A very simple design. The easiest option is two connected arcs embedded in the ground. Only such a structure will not be able to withstand the weight of the flowers; for this purpose, more impressive supports are needed. Products with forging are especially decorative. They do an excellent job of their function even in winter, without flowers.

So, when the material is selected, start preparing everything you need. So, for a wooden arch, 4 beams of 10x10 cm or more should be prepared. A couple of planks can be used for the roof. And also 4 slats of 3 meters will definitely come in handy. They are used to fill the voids between the supports and the walls of the arch.

For the manufacture of stone structures, you can use natural or artificial material. The concrete solution will allow each pebble to be connected into a single whole. You can make a foundation using reinforcement and concrete. This will require reinforcement and mortar.

The metal arch is mounted using a pipe bender, it's easier. You can make a beautiful structure using fittings. Prepare 2 rods for the base 6 meters long, 10 mm in diameter. A slightly thinner armature - with a diameter of about 6 mm and a length of up to 90 cm - will be required for the jumpers that are placed between the bows. The metal should be protected from oxidation, and for this, a primer, enamel is used.

This solution cannot be called environmentally friendly, but there is no need to think about practicality. A country arch for climbing plants from polypropylene pipes is made as simple as possible. If you paint the structure and properly cover it with plants, then it will not be easy to distinguish it from a high-quality metal structure. You will need the following materials:

• two pipes with a length of at least 120 cm - needed to create longitudinal beams;
• you can take PVC or polypropylene pipes - the latter bend well, which means you can make a rounded top, and not a straight one;
• short lengths for crossbeams and supports;
• adapters are used to connect pipes.

You can do it yourself like this.

1. Cut long pipes into several equal short pieces.These details will make the structure more stable.
2. You can use glue to hold the tubes together. An alternative would be heating the material and soldering.
3. The support and foundation must be reliable, because the structure itself is very light. Fittings are attached to the support pipes with the help of polyurethane foam. Wait until it dries completely.
4. The reinforcement is driven into the ground by 0.5-1 m.
5. The soil around should be filled up and tamped tightly. If desired, the pits are completely concreted.

A decorative arch is made very simply, no special skills are required. A flower arrangement at home is usually made of wood. but if you have certain skills, you can make one from a profile pipe.

The material must be properly prepared and dried. Otherwise, you will have to face deformation due to drying out. This will have a very bad effect on the strength of the structure as a whole.

So, first you need to prepare the template for the upper part. Plain cardboard is used

A drawing of the desired size is made with a simple pencil. Next, you should fasten the template and material. The required workpiece is carefully cut with an electric jigsaw. There should be two details - these are the arches.

Additionally, on the upper part, you can make a decor from branches. On such an arch, a flower arrangement will look very interesting. You can assemble the structure like this.

1. The bases of the bars should be attached to the blank arches, the slats should be nailed. It is convenient to work with a hammer and small nails. The base is more reliable to fix with self-tapping screws.
2. You can go to the side. The panel is made of wooden slats, which allows you to close all the voids. Later this place will be completely hidden by flowers. The side walls are covered with grilles. It is this design that ensures how beautiful the plants will curl.
3. Now it remains to install the structure in the selected location.

The completion of the work will be installation in the ground and fastening of plants. It is worth making holes in the ground for installing the bases. The arch is installed exactly with the help of a building level and is additionally fastened with metal corners.

These arches are the most durable. In fact, they are not even installed, but built. A good solution for a large area. In a small courtyard, a stone arch is out of place. In fact, it is better to invite an experienced bricklayer to install such a structure. You can make a brick structure yourself.

1. For the manufacture of the arch itself, you will need reinforcement and concrete mortar. The bricks are stacked on top of each other as if with an offset. The result is a semicircle. Metal rods are inserted into the holes, a liquid solution is poured. Leave the workpiece to dry.
2. The foundations are laid with standard masonry, as in the construction of a barn, for example. Bricks are also bonded with concrete mortar. The use of reinforcement on the supports is optional.
3. You can make a foundation at the installation site. For this, two deep holes are dug. At the bottom is a lattice woven from reinforcement. The pits are filled with concrete and dry. Arch supports are installed on top.
4. The top bow is placed last. It is also fixed with mortar.
5. The finished arch can be plastered and revetted.

Such an arch in the courtyard will serve for many years. It is impossible to make a complex structure without welding skills, but a simple one from fittings is easy.

Step-by-step instruction.

1. First you need to bend two support arcs. It is convenient to use a pipe bender.
2. A circle is drawn on the ground along which the pins are sewn.The more such fasteners for the reinforcement, the smoother the arc will be. You can also put siding between the rods and pins to facilitate the process.
3. At this stage, you will need an assistant. It is necessary to simultaneously bend the rod from both sides until it acquires the desired shape.
4. The finished reinforcement is driven into the ground by about 50-60 cm.
5. You can align the supports with any metal strip. It is important to constantly monitor the level.
6. The transverse rods are welded for fixing.

A similar structure can be made from a metal profile or from a professional pipe. This is a good solution for clematis and similar plants. True, you need a welding machine and the ability to use it. Such an arch will last for many years if covered with enamel for protection. You can improve the appearance with paints and varnishes.

For information on how to make an arch from polypropylene pipes with your own hands, see the next video.