All about bricklaying trowels

For a good brick laying, it is important to use a special tool. You can get one at a specialty store. It is worth saying that the inventory is not cheap today. At the same time, the standard version does not take into account the necessary technical characteristics of the material used and the structural features.

The trowel for laying bricks in the construction industry was called "trowel".

This is a trowel in which both sides are thoroughly cleaned in the structure. A blade made of steel can be with a wood or plastic handle.

Such a trowel plays the role of the main assistant when it is necessary to make masonry, embroider seams, lay tiles, decorate the premises inside and outside. There are types that are necessary when laying the plaster layer or leveling it, applying wallpaper supplied in liquid form, mortar using cement or glue that is used when laying tiles.

It consists of:

• work plane;

• pens;

• neck;

• butt.

The work plane can be:

• oval;

• square;

• triangular.

Due to it, the material is leveled.

The handle is made short because there is no need to exert force. As a rule, it is wooden, but you can find tools on sale with metal or rubberized ones. In more expensive versions, this element is removable and can be easily replaced.

On one side, the handle is equipped with a butt. The master taps them while laying bricks and even stones. It can only be metal, since other material simply cannot withstand the load.

There are many options for the tool, each with its own specifics and is used in a specific area. The trowel is made in different shapes, the handle can also be different.

For a brick stove and for jointing, the dimensions of the tool will differ. Differently bent jumpers between the handle and the working plane allow, depending on the type of work performed, to lay the mortar with a hand tool, keeping its center of gravity in relation to the hand.

There are different tools that differ in their scope. A bricklayer's trowel is used for laying and mixing the mortar. Its special shape of the working surface allows the craftsman to use the tool in places where it is difficult to reach.

Concrete workers use trowels with a triangular working surface. It is used during bricklaying.

Tilers use a tool featuring a teardrop-shaped spatula.

The plaster version from 6 to 10 cm is necessary for leveling the construction mixture with sand and cement.

The trowel can also be used for grouting the material. Already after the mortar has hardened, the tool makes the surface attractive.

There is a serrated tool. Its scope of use is application of adhesive solution when tiles are laid and walls are leveled. The dimensions of the teeth are 0.4-1 cm.

It is best when the blade is made of high carbon steel or stainless steel.

The surface of the product is thoroughly sanded, even if the tool is made by hand. This is necessary so that the solution does not remain on the surface of the platform and is distributed evenly.

You can find a plastic trowel. This model is suitable for wallpaper or tile adhesives. The tool is lighter than metal, so the brush fatigue less.