Battery for a robot vacuum cleaner: selection and subtleties of replacement

Maintaining cleanliness in the house is one of the main concerns of any housewife. The household appliances market offers today not only various models of vacuum cleaners, but also fundamentally new modern technologies. These technical innovations include the so-called robotic vacuum cleaners. It is an electronically controlled device capable of cleaning without human assistance.

Outwardly, such a home assistant looks like a flat disc with a diameter of about 30 cm, equipped with 3 wheels. The principle of operation of such a vacuum cleaner is based on the functioning of the cleaning unit, navigation system, driving mechanisms and batteries. As you move, the side brush sweeps debris towards the center brush, which throws debris towards the bin.

Thanks to the navigation system, the device can navigate well in space and adjust its cleaning plan. When the charge level is low, the robot vacuum cleaner uses infrared radiation to locate the base and dock with it to recharge.

The charge accumulator determines how long your household device will last. Surely a battery with a higher capacity will last longer. But it is imperative to find out the type of battery, features of operation, all the advantages and disadvantages.

This is the storage device most commonly found in robotic vacuum cleaners. It is found in vacuum cleaners from Irobot, Philips, Karcher, Toshiba, Electrolux and others.

Such batteries have the following advantages:

• low cost;
• reliability and long service life if the operating rules are followed;
• tolerate temperature changes well.

But there are also disadvantages.

• Fast discharge.
• If the device is not used for a long time, the battery must be removed from it and stored in a warm place.
• Get hot when charging.
• They have the so-called memory effect.

This type of battery is now used in many devices. It is installed in robotic vacuum cleaners from Samsung, Yujin Robot, Sharp, Microrobot and some others.

The advantages of such batteries are as follows:

• they are compact and lightweight;
• they have no memory effect: the device can be turned on despite the battery charge level;
• charge quickly;
• such batteries can save more energy;
• low self-discharge rate, the charge can be stored for a very long time;
• the presence of built-in circuits that protect against overcharging and fast discharge.

Disadvantages of lithium ion batteries:

• gradually lose capacity over time;
• do not tolerate continuous charging and deep discharge;
• more expensive than nickel-metal hydride batteries;
• fail from blows;
• are afraid of sudden changes in temperature.

It is the most modern version of the lithium ion battery. The role of the electrolyte in such a storage device is played by a polymer material. Installed in robotic vacuum cleaners from LG, Agait. The elements of such a battery are more environmentally friendly, because they do not have a metal shell.

After 2–3 years, the service life of the factory battery ends and it must be replaced with a new original battery. You can replace the charge accumulator in the robot vacuum cleaner yourself at home. To do this, you need a new battery of the same type as the old one and a Phillips screwdriver.

The step-by-step algorithm for replacing the battery of the robot vacuum cleaner is as follows:

• make sure the device is turned off;
• use a screwdriver to unscrew 2 or 4 screws (depending on the model) on the battery compartment cover and remove it;
• carefully remove the old battery by the fabric tabs located on the sides;
• wipe the terminals in the housing;
• insert a new battery with the contacts facing down;
• close the cover and tighten the screws with a screwdriver;
• connect the vacuum cleaner to the base or charger and fully charge.

The robot vacuum cleaner clearly and effectively copes with the tasks and cleans the home space with high quality. As a result, you will have more free time to spend time with your family and for your favorite activities. One has only not to violate the rules of operation and change the battery in time.

To ensure that the battery of your robot vacuum cleaner does not fail ahead of time, carefully read some of the recommendations of specialists.

• Always clean your brushes, attachments and dust box thoroughly... If they accumulate a lot of debris and hair, then more energy is spent on cleaning.
• Charge the device and use it more oftenif you have a NiMH battery. But do not leave it to recharge for several days.
• Discharge the battery completely while cleaning, before disconnecting. Then charge it 100%.
• Robot vacuum cleaner requires storage in a cool and dry place... Avoid sunlight and overheating of the device, as this will adversely affect the operation of the vacuum cleaner.

In the video below, you will learn how to convert a nickel-metal-hydride battery to a lithium-ion battery, using the example of the Panda X500 vacuum cleaner.