Features of Philips vacuum cleaner repair

Content
  1. general information
  2. Repair
  3. Additional information on faults

Philips vacuum cleaners are high-tech devices used in domestic and industrial environments. Modern equivalents of these devices are designed to minimize the occurrence of situations leading to malfunctions.

Failure to comply with the operating rules established by the manufacturer and prescribed in the service documentation may lead to early failure of consumable components, individual units of the vacuum cleaner or the entire device as a whole.

general information

The Philips line of household cleaning appliances presents to the consumer models of devices designed for cleaning with a dry method and using technologies of washing operations. Among the latter, the following names can be noted:

  • Triathlon 2000;
  • Philips FC9174 / 01;
  • Philips FC9170 / 01.

The functionality of each specific device can define a list of individual malfunctions, which include general malfunctions common to all vacuum cleaners.

The main nodes in which problems may arise:

  • engine (turbine);
  • suction and filtration systems;
  • electrical blocks.

Peripheral breakage points:

  • brush nozzle;
  • electric cable return mechanism;
  • connectors and fasteners.

Repair

Engine

Signs of breakdown or other violations of the stable operation of the motor are reduced to the following manifestations:

  • uncharacteristic noise: buzzing, grinding, whistling, and so on;
  • beating, vibration;
  • sparking, melted smell, smoke;
  • no signs of work.

Remedies:

  • if the vacuum cleaner is under warranty service, contact the nearest representative office ready to carry out repairs or replacements under the contract;
  • if the device breaks down after the end of the warranty period, you can carry out self-repair and maintenance.

Clogged filter element

A common problem that causes noise from a vacuum cleaner to increase is clogging of the filter element, as a result of which the suction effect is deteriorated. In order for the device to work in the proper mode, the motor takes on additional loads. As a result of the operation of the engine in the overload mode, the frequency indicators of sound increase - the working vacuum cleaner begins to "howl". Solution: clean / rinse filters - ensure free passage of air flow. If the filter unit does not imply such preventive manipulations, it should be replaced.

Some machines are equipped with garbage bags. These bags act as filters. Cleaning and replacing them is an important part of vacuum cleaner maintenance, ensuring long, trouble-free operation.

Interruptions in the stable operation of the electric motor

Runout, vibration, extraneous noise in the area of ​​the engine may indicate the failure of its individual parts: bearings, collector elements and others. These parts of the motor system are not amenable to "spot" repair. If signs of breakage are found, replace with original ones purchased from the manufacturer or corresponding analogs.

Malfunction of the electrical system

Sparking in the area of ​​the electric circuit of the vacuum cleaner indicates the presence of a breakdown that led to a short circuit.The reason for such a malfunction is a point overheating of the wiring, which arose as a result of exceeding the permissible load, or deterioration of the contact characteristics of the connections.

No signs of work

This breakdown factor is due to the failure of the engine itself. In this case, the latter must be replaced due to the inexpediency of its repair.

Deterioration of absorption

If the vacuum cleaner has stopped sucking in debris, and no engine or turbine malfunctions were found, you should pay attention to the peripheral parts of the device: a telescopic suction tube, a turbo brush, a corrugated hose.

The elementary reason for the violation of the suction functions is the ingress of oversized debris into the air duct. The optimal solution is to clean the air ducts by separating the collapsible parts:

  • separate the telescopic part of the tube from the hose and brush;
  • check for debris in it;
  • if detected, delete it;
  • if the tube is clean, repeat the manipulation with the corrugated hose.

The most problematic point of the suction system is the turbo brush. If debris gets stuck in it, you will have to disassemble the brush in accordance with the manufacturer's instructions. Most models of vacuum cleaners have collapsible brushes, which allows for preventive cleaning manipulations.

Additional information on faults

The appearance of signs of a particular malfunction may be the result of the influence of another breakdown. For example, the deterioration of the throughput of the filter elements increases the load on some parts of the electric circuit of the vacuum cleaner. As a result, negative effects increase the likelihood of other malfunctions occurring. In order to avoid the mutual influence of damaged units on each other, it is worth carrying out preventive / repair work in a timely manner.

It is unacceptable to carry out wet cleaning with a vacuum cleaner that is not suitable for this. Household appliances that are not designed to absorb moisture do not have engine moisture protection. Such misuse leads to inevitable failure of the apparatus.

Frequent operation of the vacuum cleaner with a burned-out garbage bin leads to an increase in the load factor on all components of the mechanism, including rubbing parts, which leads to a reduction in the service life of component parts and the entire apparatus as a whole.

Correct use of the household appliance for cleaning and adherence to the operating instructions will avoid premature failure of the appliance and extend its service life.

For troubleshooting of the Philips powerlife 1900w FC8450 / 1 vacuum cleaner, see the following video.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture