Features of Era spotlights

From this article you can learn all the key features of the Era spotlights. Characterized by LED floodlights-lanterns, models 20-30 W and 50-100 W, floodlights with and without motion sensor, street models and devices for the home. The main accessories and connection procedure are described.

Modern Era floodlights are relatively inexpensive. The various models from this manufacturer have attractive designs.

They even approach the packaging very carefully and carefully. Installation is quick and easy. Floodlights emit just as good light as quality halogen bulbs.

But nevertheless, it is provided for and is completely ready to perform its function. True, the reliability of such models sometimes raises criticism. Era devices can be relatively heavy. The current consumption is small, sometimes even less than the manufacturer reports.

Choosing a street LED floodlight with a power of 50 W, you should definitely pay attention to the LPR-021-0-40K-050 model. The device immediately stands out in that it is designed for the level of electrical resistance IP65. Its light temperature is 4000K. At the same time, the luminous flux power reaches 4000 lm. And such a powerful device fits into a compact case measuring 18.3x13.1x3.6 cm.

The manufacturer promises high resistance to mechanical stress. The minimum operating temperature is –40 degrees.

The designers took care of the compliance with the 1st class of protection against electric shock. The light ripple is below 20%, which is a very good indicator.

Other parameters:

• weight 460 g;
• anodised aluminum body;
• transparent tempered glass diffuser;
• standard voltage from 200 to 240 V;
• there are no temperature restrictions during storage and transportation.

If we are talking about devices with a power of 10 W, then it is imperative to mention the LPR-021-0-30K-010 floodlight with SMD class LEDs... It gives out a luminous flux of only 800 lm, but in a small area this may well be enough.

The color temperature of the stream is 3000K. The linear dimensions of the device are 9.5x6.2x3.5 cm. Warm white light is very pleasantly perceived.

Installing this device is quite easy. A special type of bracket is provided. In combination with the adjusting bolts, it allows you to select the direction of the illumination.

Color accuracy exceeds 75%, climatic group - U1; total weight - 120 g.

The assortment of Era also includes models for 20 watts. It emits 2 times more light than in the previous case. The product fully complies with the global IP65 electrical safety standard. Standard operating temperatures from -40 to +45 degrees; linear dimensions - 13.6x5.3x18.8 cm.

But the company also offers 30W devices. This is primarily about LPR-021-0-30K-030. This device emits a luminous flux up to 2400 lm. External dimensions are 139x104x35 mm. The black case looks attractive.

If even this power is not enough, you can consider devices for 100 watts. The LPR-021-0-65K-100 version emits 8000 lumens of light. True, its size has also been increased to 25.1x18.3x3.6 cm.

A cold white spectrum is typical for the model. You can easily illuminate even a monument, even a park or a stadium, even a facade of a building; model weight - 880 g.

But Era is ready to supply a battery-powered floodlight as well. Its power is only 10 watts. But work is guaranteed within 150 minutes. The color temperature is 6500K, and the luminescence intensity is 900 lm. Overall size - 14.5x17.5 cm; the design is designed for use both in the house and outside it, at a temperature not lower than –30 and not higher than +50 degrees.

ENIOP-04 "Snowflakes" will be an excellent acquisition for the New Year holiday.

But its optical power is sufficient for most people; level of electrical protection - IP44. Wall suspension slots are provided. The device can be connected to typical 220 V networks through a 5 m factory cable.

There are no LED models with a motion sensor in the official catalog. It is also impossible to find a halogen apparatus there. But there is a solar-powered model. It's about ERAFS024-07. It has a motion sensor; the battery is taken out.

The facade model is suitable for illuminating houses, gazebos and garages. Working and static illumination modes are provided. There are 6 LEDs inside. The body is made of plastic. The device consumes only 6W and emits cool white light.

Floodlights for plants from this brand are presented in a wide range. The red-blue device FITO-100W-RB-LED stands out among them. Galvanic isolation provided. The model is suitable for the cultivation of tomatoes, garden herbs and eggplant. Working voltage from 180 to 240 V.

Other nuances:

• 216 LEDs
• radiation with a length of 440 to 660 nm;
• color temperature 1200K;
• dust and moisture protection at the level of IP65;
• flame retardant plastic housing;
• net weight 1.76 kg;
• the level of light pulsations is 45%.

A good laser spotlight is ENIOP-06. He received the additional name "Dancing Santa". The device has good electrical protection - IP44.

The projection image includes green and red beams; you can turn on the flashing mode.

Again, there are no sensory models in the catalog. But there is "Falling Snow" - a very elegant model. ENIOP-03 has a multi-mode "cold glow". The device actually creates the visual effect of snowfall in the projected image. As with other models, the mains cable is 5 m long.

It is appropriate to complete the review on a flashlight (albeit not manual) SB-504 "Aurora". The set includes 3 silver lamps. It is based on high-tech LEDs of the latest generation. They not only emit a more powerful luminous flux, but also serve for a rather long time. For recharge, there are 3 slots for AAA batteries.

Technical specifications:

• 4 LEDs;
• luminescence intensity 70 lm;
• beam distance - 5 m;
• no magnetic holding element is provided;
• width 7.3 cm;
• height 2.45 cm.

The branded stand LPR-STAND shows itself from an excellent side. The device is suitable for one spotlight. It is used where rigid fixation is impossible.

The weight of the stand is 700 g, and you can mount projectors not heavier than 3 kg on it.

There is also a tripod in stock. LPR-TRIPOD - construction for 2 floodlights weighing no more than 3 kg. It is also possible to transfer 1 spotlight. The linear dimensions are 16x8.5x8.5 cm. The height can be changed from 62 to 160 cm. The weight of the model is 1.75 kg.

Typical devices are connected to single-phase 220 V networks. An earth wire must be used.

It is imperative to monitor the electrical safety class. In order for grounding to accomplish the task, it is necessary to use automatic protective equipment and differential circuit breakers.

The cable cross-section is chosen very carefully. It is judged by the consumed power, not the equivalent power.The motion sensors (if any) are connected to the breaks of the phase cables. In relation to conventional switches, they must be connected in series.

Other recommendations:

• if possible, conduct wiring on the street in a metal pipe;
• all work should be performed with the electricity turned off;
• carefully monitor the condition of the insulation.