How to sew a sheet correctly?

There may be many reasons why a person wants to sew a sheet. For example, he was presented with a new mattress, but none of the available sheets fit him in size, as the mattress has a non-standard shape or size. Or maybe he moved, and the new dwelling does not have the same beds as he had before. Or he just wants to get a skill that will later not only come in handy in life, but also become a source of additional income. So he wants to know how to sew the sheet correctly.

The ideal solution is cotton, which is safe even for babies, hygroscopic, has good air permeability, wear resistance and is extremely easy to clean. If you have no financial constraints, you can use bamboo fabrics, which, in addition to all of the above, have antimicrobial and tick prevention properties. Silk is also good for a sheet - beautiful, light, pleasant to the touch and durable. But these materials have a very high cost, which is not always affordable to provide good sheets for all family members.

For children, the best option is coarse calico - cheap dense fabric, resistant to wear, does not accumulate static electricity, warms in winter, and absorbs moisture well in hot weather. But coarse calico has an undesirable tendency to form pellets. Flannel, an inexpensive and durable soft fabric that can only be dyed with natural dyes, is also a good choice. It retains heat well, but it can shrink strongly when washing and dries for a long time.

Let's start with the size: to the length and width of the mattress, you need to add another one and a half to two of its thicknesses on both sides, for example, if the mattress size is 90x200 and its thickness is 15 cm, you need to add 15 cm to each side, and to the resulting result, 7.5 –15 cm to tuck (the last item for a fold can be taken as 10 cm). This means that you will need a piece of fabric of approximately 140x250 cm:

• length - 10 + 15 + 200 + 15 + 10 = 250;
• width - 10 + 15 + 90 + 15 + 10 = 140.

Everything is banal and easy here. You will need: a measuring tape, fabric, a sewing machine, thread and pins.

In order to sew a primitive sheet, it is enough to simply tuck and sew 1-1.5 cm of fabric around the entire perimeter (the size determination scheme is above). To make the corners neat and beautiful, you need to cut off the tips by a centimeter, bend the resulting angle by another 1 centimeter, and then tuck both sides. Secure with a pin until the peeling process begins. If the fold is wrinkled, you need to iron it with an iron.

It's even easier here. The dimensions remain the same, you just need to sew two identical pieces of fabric, equal in size to a regular sheet, with a sewing machine. But only along the shared thread.

It is a little more difficult to make a stretch sheet, but this is offset by the fact that it is more practical and easier to put on the mattress.After that, you can forget about her, and this is much better than wasting time every morning, covering an ordinary sheet, pretty wrinkled or crumpled in one place. In addition, stretch models of sheets can be of various shapes, depending on the mattress. Sometimes made from two pieces of fabric. This, of course, is more difficult, but such a thing will last longer. It can also be made from a duvet cover, but it is too long and troublesome.

First, you need to measure the size according to the example above, but with a slight correction: you need to additionally retreat two widths of the existing elastic band. Then there are three ways.

1. Simplest: just insert small rubber bands in the corners. This method is the least troublesome and costly, but it is enough to fix the sheet on the mattress. The result of this innovative method will not look very beautiful, and the risk of tearing the sheet is quite high.
2. More difficult. The size does not change. In advance, you need to make a rubber band with a diameter slightly smaller than the diagonal of the mattress (3-5 cm), then gradually wrap the elastic in the fabric, leaving about a centimeter of free space, periodically securing it with pins. It is more convenient to start at the edges. When the procedure is complete, sew with a sewing machine around the perimeter to sew on the elastic.
3. The most difficult, troublesome and costly, but products made in this way are the most reliable and aesthetic. Here you will need two pieces of fabric: one with the length of the mattress perimeter (two widths and lengths + 2-3 centimeters, which will then disappear) and one and a half height (thickness), and the second one by the size of the mattress (length * width). First, you need to make a semblance of a circle from the first piece of fabric along the shared thread, then sew this piece with the second in the same way and sew an elastic band, as indicated in the second method.

Here everything is the same, only instead of the perimeter of the rectangle, you need to start from the diameter of the circle and follow the second or third method. The round sheet can be easily slipped onto the oval mattress.

If the mattress is made in the shape of an oval (usually done in baby cots), sewing a sheet will not be more difficult than sewing a sheet on a rectangular mattress. You need to measure the distance between the extreme points of the mattress, cut out a rectangular piece of fabric and round off the edges. Then proceed according to one of the above schemes. The oval sheet can also be worn over a round mattress. It will look unusual (the corners will hang down), but some people like it.

For information on how to properly sew bedding, see the next video.