Turntable "Arcturus": lineup and tips for setting up

Vinyl records have been replaced by digital discs over the past few decades. However, even today there are still a small number of people who are nostalgic for the past. They not only value quality sound, but also respect the originality of the records. In order to listen to them, of course, you need to purchase the highest quality player. One of these is "Arcturus".

The "Arcturus" vinyl player is a great option for connoisseurs of the classics. It is especially popular with lovers of antiquity.

If we consider the design, you can understand that this is a real classic. Its main components are a disk for placing records, a tonearm, a pick-up head, as well as the turntable itself. As the stylus travels along the grooves on the record, mechanical vibrations are converted into electrical waves.

To understand what such players are, you need to familiarize yourself with the most popular models.

In the year 83 of the last century, this player was released at the Berdsk radio plant together with the Polish company "Unitra". This served as proof that high-quality equipment can also be made in the Soviet Union. Even today, this model can compete with some foreign players.

As for the technical characteristics of "Arcturus 006", they are as follows:

• there is a pressure-type regulator;
• there is a frequency setting;
• there is an automatic stop;
• there is a microlift, a speed switch;
• the frequency range is 20 thousand hertz;
• the disc rotates at a speed of 33.4 rpm;
• the knock coefficient is 0.1 percent;
• the noise level is 66 decibels;
• background level is 63 decibels;
• the turntable weighs at least 12 kilograms.

This stereo-type electric player was released by the Berdsk Radio Plant in 81 of the last century. Its direct purpose is considered to be listening to records. It consists of a two-speed EPU, electronic protection, signal level control, as well as hitchhiking and microlift.

The following can be said about the technical characteristics:

• the disc rotates at a speed of 45.11 rpm;
• the knock coefficient is 0.1 percent;
• the frequency range is 20 thousand hertz;
• background level - 50 decibels;
• the weight of the model is 13 kilograms.

The appearance of this model of the player dates back to the 76th year of the last century. It was created at the Berdsk Radio Plant. With its help, various musical programs were played. This could be done using microphones, tuners or magnetic attachments.

The technical characteristics of "Arctura-001" are as follows:

• the frequency range is 20 thousand hertz;
• the power of the amplifier is 25 watts;
• power is supplied from a 220 volt network;
• the model weighs 14 kilograms.

In the year 77 of the last century, another model of the player was released at the Berdsk Radio Plant. Its direct purpose is considered to be the reproduction of sound recordings from records. The development was based on the Arctur-001 design.

As for the technical characteristics, they are as follows:

• the disc rotates at 45 rpm;
• the frequency range is 20 thousand hertz;
• detonation coefficient - 0.1 percent;
• such a device weighs 22 kilograms.

Correct setup is required for the player to last much longer. This will require a diagram that comes with any turntable. First, you need to set it, and then set the optimal level for the selected model.

After that need to tune the head pickup, because how it is placed will depend not only on the area, but also on the angle of its contact with the vinyl track. You can position the needle using a ruler. or a professional protractor.

There should be two special fastening screws on its head. With their help, you can adjust the level of the needle stick out. With a slight loosening of them, you can move the carriage and set the corner at the level of 5 centimeters. After that, the screws must be carefully fixed.

The next step is to set the azimuth of the cartridge. It is enough to take a mirror and put it on the turntable disc. Then you need to bring the tonearm in and lower the cartridge to the mirror located on the disc. When properly positioned, the head should lie perpendicular.

One of the most important components of the player is the tonearm. It is designed to hold the pickup above the disc, as well as to smoothly move the head itself while sounds are being played. From that how correctly the tonearm adjustment will be done depends entirely on the final sound of the melody.

For customization, you must initially print the template. Wherein the test line should be 18 centimeters... The black dot drawn on it is needed to install it on the spindle of this device. When it is put on, you can proceed with the setup itself.

The needle must be installed in the center of the intersection of the lines. It should be parallel to the grid, first you need to check everything in the far region of the lattice, and then in the near region of the lattice.

Another important point is adjusting the tracking force of the tonearm. To do this, set the anti-skate to the "0" parameter. Next, you need to lower the tonearm, and then with the help of weights, you need to gradually adjust it. Position must be free, that is, the cartridge should be parallel to the deck of the player, while neither rising nor falling down.

The next step is to install a special counterweight system, or, in other words, anti-skating. With its help, you can prevent free movement of the cartridge.

To make a finer setting, you need to use a laser disc... To do this, you need to install it, then start the player itself. After that, the tonearm must be lowered with the cartridge onto the disc. Adjustments can be made by turning the anti-skating knob.

To summarize, we can say that Arcturus turntables have enjoyed immense popularity in the last century. Now they are also in trend, but already as a retro technique. Therefore, you shouldn't ignore such stylish and practical turntables.

An overview of the "Arctur-006" player in the video below.