How to choose and install a projector wall bracket?

A fairly popular device today is considered multimedia projector - it can be found not only in offices, but also in ordinary apartments. Most often, projectors are installed on a table, but this is not always convenient, therefore, it is best to install equipment on a wall. To do this, you need to additionally purchase a special mount - a wall bracket. However, when choosing a bracket, you should take into account the design features and its mechanisms.

The projector wall bracket is a system that allows not only to safely and correctly install equipment, but also to hide all connection cables, giving the interior a stylish look.

Installing the Projector Using a Wall Mount Bracket differs from those used for speakers, monitors and televisions, which can be fixed without adhering to the requirements for the tilt of the cabinet in terms of geometry and height... For projectors that are mounted on such brackets, the values ​​of the special design tables apply. Observing them during installation, you can be sure that the projector will be able to display a high-quality and enlarged picture on the screen.

The main design features of the wall brackets include:

• the presence of height adjustment of the body;
• the ability to fix the angle of inclination of the optical axis of the technique;
• the ability to adjust the rotation of the body.

Projector wall brackets are now on the market in a huge assortment, moreover, each model aboutIt differs not only in design, price, but also in technical capabilities. In order for this device to be convenient to use and reliably serve for a long time, it is necessary to take into account some parameters when choosing it. Let's list what applies to them.

• The weight... The mount must be safe in operation and withstand any load. It is not recommended to buy brackets made of too light material.
• Correspondence of the mounting slots. The location of the mounting slots on the bracket and on the projector must match exactly.
• Rod length. All adjustable booms have minimum and maximum length limits. To determine this indicator, you need to know the height of the screen and the room.

Before attaching the video projector wall bracket, be sure to think over its placement... In addition, all the necessary cable lines and correctly calculate the rod length... To determine the length of the rod, subtract the screen height from the total height of the room.

As for the installation itself, it is most often performed in ways that depend on the wall material.

• Concrete walls. First of all, you will have to make markings on the wall for the bracket and punch (drill) holes. Then the dowels are driven in, the bracket plate is applied and fixed with self-tapping screws.
• The walls are covered with plasterboard. In the event that the projector weighs less than 5 kg, then the bracket can be fixed directly to the drywall sheets using butterfly dowels. If the equipment is heavy (over 5 kg), then the bracket must be attached to the pre-installed metal profiles.

Completion of installation work is considered projector setup. To do this, you need to take the following steps:

• turn on the equipment, draw the curtains and turn off all the lights (make the lighting in the room minimal);
• using special settings to align the position of the picture on the screen and correct the focus;
• adjust brightness and contrast.

See below for how to install the Promethean projector mount.