How to connect two TVs to one digital set-top box?

Analog television has long faded into the background. It has been supplanted by digital and internet broadcasting. Russia does not lag behind other countries in this direction, offering the necessary conditions for connecting high-definition television channels. To enjoy a variety of content without leaving your home, you need a special console. One or more TVs can be connected to this unit.

To establish a connection, you will need special equipment. It is worth noting that analog television is different from digital broadcasting. This option is less and less used by modern consumers. We are interested in digital format.

Its television channels are linked into separate multiplexes. In the process, packets are transmitted to the TV tuner. After that, decryption takes place, during which the multiplex is divided into separate channels. Experts point out that there are three main standards.

• Satellite. A popular format for which the following abbreviations are used: DVB-S2 or DVB-S.
• Cable. Another option that remains relevant due to an affordable price. It is identified with the DVB-C mark.
• Essential. Today it is the most common and used type. You can recognize it using the DVB-T2 designation.

Digital set-top boxes are essential for broadcasting high quality images. A clear and rich picture is preserved regardless of the broadcast format. To date, all models used support the HD format - this resolution is the most popular.

To connect several television receivers to one set-top box, in addition to the receiver, you will also need a splitter. And also you can not do without an antenna, which will be connected to the tuner via a coaxial cable.

The modern electronics market offers a rich assortment of TV equipment needed to synchronize equipment.

All receivers sold are divided into certain groups depending on the broadcast format.

• Satellite. You cannot do without a receiver of this type when using a special satellite dish. Before proceeding with the purchase of equipment, you need to decide on the company that will provide the service (provider).
• Cable equipment. These are special devices for receiving packages of television channels. Services are provided by regional firms.
• Essential prefixes. They are used to receive a signal from repeaters located on the ground. It is worth noting that such a broadcast format can be captured even through a conventional antenna.
• To use interactive television, you need special "smart" devices - smart set-top boxes. And also you can't do without an Internet connection. If your TV is equipped with the Smart TV function, no additional equipment is required.

There are several ways you can use to connect two TVs to one set-top box. Using this interface format will help save money that could be spent on the purchase of special equipment.

Its useful to note, that if you connect 2 or more TV receivers to one receiver, you can watch only one channel at a time. Switching will be performed synchronously on all TVs. Broadcasting of only one channel is associated with the peculiarity of digital technology. This function is independent of the STB or TV model.

When using the over-the-air broadcasting format, you will also not be able to watch different channels from the same antenna. At the same time, such a problem can be avoided if you use a receiver paired with a satellite dish.

To pair 2 TV receivers, you can choose one of several options offered by specialists. To avoid any problems during the synchronization process, the receiver used must have the following ports:

• USB.
• HDMI.
• RCA.
• Skart.

The first 2 options are considered the most modern and practical. To connect the TV to the tuner, you can select any of the available ports.

The most widely used option is the HDMI connector. Its main advantage is the simultaneous transmission of image and sound. At the same time, the low-frequency signal passing through the HDMI cable is able to fade out quickly. In this case, you need to adhere to the optimal distance (no more than 10 meters). Otherwise, the broadcast may be disrupted.

In this case, if the existing receiver has only an HDMI interface, a special splitter must be used to connect several television receivers. When choosing a set-top box, remember that the more ports it has, the better. The first pairing method we'll look at will work best for modern TV owners.

If the equipment is located at a great distance from each other (more than 10 meters), experts recommend using a tuner with an RF interface. This method of synchronizing multiple TVs is great due to its simplicity and high efficiency.

After looking through the product catalog, it can be noted that manufacturers offer customers a rich selection of digital set-top boxes that are equipped with RF ports.

Be sure to fan out the digital signal before making connection settings. All components of the system must be connected together with a radio frequency cable. If necessary, an amplifier can be mounted between the TV tuners and the splitter to avoid signal loss.

Some digital equipment models do not have an RF interface. In this case, a modulator should be used to synchronize several television receivers. The equipment is connected to RCA or Skart connectors.

The RF modulator is connected to one of the above ports. Remember that the equipment must be located at the output of the last splitter. To connect the rest of the system, you need a 75-ohm cable. Selects the TV channel on the modulator.

It is worth noting that the search for TV channels for multiple TVs will change depending on the receiver model you are using. Despite the wide range of equipment, all modern set-top boxes have a simple and intuitive interface. Manufacturers have thought out the menu in such a way that even new users would not have problems.

The first step is to select a new signal source, This is done in the TV settings. The menu is opened and the connector to which the digital set-top box is connected is selected as the source.

Next, you need to start the process of searching for available TV channels. This can be done automatically. It is enough to select a task and wait for the process to complete. Currently, users have the opportunity to set up 2 multiplexes for free. Perhaps, soon their number will grow to 3.

After the TV finds and compiles a list of channels, you need to save them. Sorting can be done if desired. You can also find channels manually. This setup will take much longer.

How to connect two TVs to one digital set-top box, see the video.