Why does my printer print faintly and how do I fix it?

If the printer prints faintly, then its owners begin to look for the cause of the problem in the ink cartridge. However, he is not always the source of trouble. Sometimes it's all about mechanical wear, from the pressure roll to the metering blade. Finding out exactly how to fix this problem and understanding why the printer produces a faint print on a full new cartridge will help you by looking at all of the most common causes.

Printing on a laser printer usually does not require special operator intervention. But the quality of the print can change over time. When a printer prints faintly with a new cartridge or after replacing paper, you have to look for the root cause of the problem. Some of them are directly related to user actions. For example, after a cartridge is partially empty, the ink dispensing mode changes automatically.

Among the common reasons why a printer stops printing brightly, there are several that are especially common.

• Savings on consumables. If ink is squeezed out of the cartridges to a drop, you should pay attention to the frequency of replacement or installation of new sources of ink.

• Working with graphics programs. The main reason for the problems here is the inability to customize the printing requirements. Defaults for documents, they just won't work with graphics. Scales and gradients need to be adjusted individually.

• Incorrect paper selection. The printer has drivers installed that have several different color profiles at once. The same image on different types of paper will be created with different intensities of ink supply. For example, on a simple thin sheet, it is minimal, and on photo paper, the intensity is highest. If the parameters are not changed, the print will look significantly weaker on dense and glossy substrates.

• Low ink supply. Many manufacturers' printers automatically go into economy mode when a cartridge is 50 or 70 percent depleted. The "economical printing" mode is relevant for HP, Canon printers.

• Cartridge parts are worn out... In this case, you will have to change them partially or buy a new block entirely. Otherwise, even with a full refueling, the seal will remain barely noticeable.

• Low room humidity... This factor can affect the rate at which the liquid evaporates during printing and toner storage.

These reasons are basic for a weak impression on paper when using a printer. In some cases, only complete diagnostics.

The first thing to start with when diagnosing problems is study of the manufacturer's instructions. Expensive devices are often designed to work exclusively with branded consumables. With their unauthorized replacement, the user will receive not the most attractive result when printing a print.

The following algorithm will help diagnose a malfunction affecting print faintness.

• Make sure the paint meets the manufacturer's requirements. If the consumables are not genuine, the printer may malfunction, including reduced print clarity.The list of compatible types of paint is indicated by the manufacturer on the official website. In addition, you can find out through the service centers.

• Examine the problem more specifically. Smudged ink, the absence of one of the colors indicate mechanical damage to one of the housing elements in the printing device.

• Check the condition of the printing press. It is important that the ink is sprayed evenly through the nozzle. If there is a blockage, be sure to clean it. This problem is most common in printers that have been unused for a long time.

When the cause of the malfunction is accurately diagnosed, you can proceed to eliminate it.

Most faded printer problems can be corrected by on one's own... If the print quality problem persists even after refilling the cartridge, the most likely source of trouble is wear of magnetic roller and metering blade... Their replacement can be done separately or in combination. After installing new parts, the print density will increase, and the printer itself will not deliver inconveniences with the print quality for a long time.

Sometimes the paleness of the paint is due solely to the fact that the dispensing squeegee is clogged along the edge by compressed toner... If too much of it accumulates, the pressure against the magnetic shaft will deteriorate. When replacing parts, you should pay attention to the squeegee, thoroughly cleaning it from dirt... For these purposes, only dry processing is suitable. special napkins... It is strictly forbidden to use solvents.

If the printer starts to print poorly with a half-empty cartridge, you need to check device settings. In the block that determines the print quality, many models have an EconoMode item. If it is activated, to restore normal color intensity it will be enough to uncheck the box next to it. You need to understand that the technique goes to the economy mode for a reason, so at the first opportunity it is worth replenishing the toner supply.

Sometimes the problem with printing is not related to individual elements of the printing unit, but to the drum unit. It is on it that the image is transferred when printing. If this element is damaged or worn out, the legibility and density of the print will decrease. After replacement, all original functions will be restored.

For more information on how to fix faint printing on your printer, see the video below.