How do I refill a cartridge for an HP printer?

Despite the fact that modern technology is simple to operate, it is necessary to know certain features of the equipment. Otherwise, the equipment will malfunction, which will lead to breakdown. Products of the Hewlett-Packard trademark are in great demand. In this article, we will tell you how to correctly replace cartridges in printers from the above manufacturer.

The popular manufacturer Hewlett-Packard (HP) produces two types of office equipment: laser and inkjet models.... Both options are in high demand. Each of them has certain advantages and disadvantages, which is why equipment of various types remains relevant. To safely remove the cartridge from the machine, you need to know how it works. The workflow depends on the type of printer.

Office equipment of this type operates on cartridges filled with toner. It is a consumable powder. It is worth noting that the consumable is harmful to the health of people and animals, therefore when using the printer, it is recommended to ventilate the room, and the refueling process itself is carried out by professionals and in special conditions.

The work is carried out according to the following scheme.

1. First, the equipment must be disconnected from the mains... If the machine has recently been used, wait until it has completely cooled down. The room where the equipment is installed should have optimal humidity and temperature. Otherwise, the powder paint can get lost in a lump and completely deteriorate.
2. The top cover needs remove carefully.
3. If done correctly, the cartridge will be visible. It must be carefully taken in hand and pulled towards you.
4. At the slightest resistance, you must carefully inspect the compartment for the presence of foreign objects. If you cannot reach the cartridge, you must remove the special securing latch. It is located on both sides of the cartridge.

Note: if you are going to carry the consumable, it must be packed in a tight package and sent in a dark box or separate box... When reusing an removed cartridge, it is important to be as careful as possible and grasp the edges of the cartridge to remove it. It is recommended to protect your hands with gloves.

Printers of this type are often chosen for home use due to their more affordable cost.

Now let's move on to the procedure itself.

1. Necessarily unplug the printer and wait for the vehicle to stop completely. It is advisable to let it cool completely.
2. Open the top cover of the printer gentlyfollowing the instructions for use (some manufacturers put prompts on the case for users). The process depends on the specifics of the model. Some printers are equipped with a separate button for this.
3. Once the lid is open, you can take out cartridges... By gently pressing until it clicks, the consumable must be taken by the edges and removed from the container. If there is a holder, it must be lifted up.
4. Do not touch the bottom of the cartridge when removing... A special element is placed there, which is easy to break even with the slightest pressure.

Once the old elements are removed, you can start installing the new ones. You just need to insert them into the tray and gently press on each cartridge until it clicks. You can now lower the holder, close the lid and use the equipment again.

You can refill the cartridge for the HP printer yourself. This procedure has certain features that you must definitely familiarize yourself with before starting work. Self-refilling is much more profitable than replacing old cartridges with new ones, especially when it comes to color equipment. Consider the scheme of refueling a consumable for an inkjet printer.

To refill the cartridges, you will need:

• suitable ink;
• Empty paint containers or cartridges that need to be refilled;
• a medical syringe, its optimal volume is from 5 to 10 millimeters;
• thick rubber gloves;
• napkins.

Having collected everything you need, you can start refueling.

1. Place new cartridges on the table, nozzles down. Find the protective sticker on them and remove it. There are 5 holes under it, but only one, the central one, is needed for work.
2. The next step is to draw ink into the syringe. Make sure the paint is compatible with your equipment. When using new containers, you will need 5 milliliters of ink per container.
3. The needle must be inserted carefully and strictly vertically so as not to break... There will be little resistance in the process, this is normal. As soon as the needle hits the filter located at the bottom of the cartridge, you need to stop. Otherwise, this element may be damaged. Lift the needle up a little and continue to insert it.
4. Now you can start injecting the pigment. It is recommended to do the job slowly. Once the ink is poured from the syringe into the container, you can remove the needle from the cartridge.
5. The holes on the printing element need re-seal with a protective sticker.
6. The refilled cartridge must be placed on a damp or dense dry cloth and left for about 10 minutes.... The printing surface should be gently wiped with a piece of soft cloth. This concludes the work: the ink container can be inserted into the printer.

The process of refilling laser equipment cartridges is complicated and hazardous to health, therefore, it is highly discouraged to carry it out at home. You will need special equipment to charge the cartridges with toner. It is better to consult a specialist.

It is necessary not only to correctly remove the cartridge, but also to install a new printing element yourself. The installation will take just a few minutes. Most models from Hewlett-Packard use removable ink cartridges, which can be purchased separately.

The official manual from the manufacturer indicated above states that before installing a new cartridge, you must insert paper into the appropriate tray. This feature is due to the fact that you can not only change the containers with paint, but also align the paper, immediately starting to print.

The work is done like this:

1. open the printer cover;
2. then you need to open the receiving tray;
3. the mount that is used to fix the paper should be pushed back;
4. several sheets of standard A4 size must be installed in the paper tray;
5. fasten the sheets, but do not pinch them too tightly so that the pick-up roller can rotate freely;
6. this completes the work with the first type of consumable.

Before purchasing a cartridge, be sure to check if it is suitable for a specific equipment model.You can find the information you need in the operating instructions. Also, the necessary information is indicated on the official website of the manufacturer.

With the right accessories, you can get started.

1. To get to the correct holder, you need to open the side of the printer.
2. If an old consumable is installed in the device, it must be removed.
3. Remove the new cartridge from its packaging. Remove the protective stickers that cover the contacts and nozzles.
4. Install new parts by placing each cartridge in its place. A click will indicate that the containers are positioned correctly.
5. Use this diagram to install the rest of the consumables.
6. Before starting up the equipment, it is recommended to perform a calibration by running the "Print test page" function.

In some cases, the equipment may not correctly perceive new cartridges, for example, incorrectly detect the color. In this case, alignment must be performed.

The procedure is as follows.

1. The printing equipment must be connected to a PC, plugged into the network and started.
2. Next, you need to go to the "Control Panel". You can find the corresponding section by clicking the "Start" button. You can also use the search box on your computer.
3. Find the section titled "Devices and Printers". Having opened this category, you need to select the equipment model.
4. Click on the model with the right mouse button and select "Printing Preferences".
5. A tab titled "Services" will open before the user.
6. Look for a feature called Align Cartridges.
7. The program will open an instruction with which you can set up office equipment. After finishing work, it is recommended to reconnect the equipment, start it up and use it as intended.

When replacing cartridges, the user may encounter some problems.

• If the printer shows that the installed cartridge is empty, you need to make sure it is seated securely in the tray. Open the printer device and check.
• Reinstalling the driver will help solve the problem when the computer does not see or does not recognize office equipment. If there have been no updates for a long time, it is recommended to reinstall the software.
• If streaks appear on the paper during printing, the cartridges may have leaked.... Also, the reason may be clogged nozzles. In this case, you will have to hand over the equipment to the service center.

See below for how to refill the HP Black Inkjet Print Cartridge.