Why won't my Brother printer print and what should I do?

Often, users of Brother printers run into a fairly common problem when their device refuses to print documents after refilling with toner. Why this is happening, and what to do if the cartridge is refilled, and the light is flashing red, we will analyze in more detail.

After refilling the cartridge, the Brother printer does not print for the following three possible groups of reasons:

1. reasons related to software failures;
2. problems with cartridges and ink or toner;
3. printer hardware problems.

If the matter is in the printer software, then it is quite simple to check.

If the problem is with cartridges or ink (toner), then there may be several reasons:

• drying of ink on the print head or air ingress into it;
• incorrect installation of the cartridge;
• The continuous ink supply loop does not work.

When changing a cartridge to a non-original one, a red light is also often lit, indicating an error.

Often times, the printer does not work due to a problem with the printing device. Such problems manifest themselves as follows:

• the product does not print one of the colors, and there is toner in the cartridge;
• partial printing;
• the print error light is on;
• When refilling a cartridge or continuous ink system with original ink, the sensor indicates that it is empty.

Of course, this is not the entire list of causes, but only common and most common problems.

Most errors and malfunctions are fairly easy to find and fix. A number of optimal solutions can be distinguished.

• The first thing to do is to check the connection of all wires and connectors. Inspect everything for the integrity of the shell and correct connection.

• In case of software failures, it may be sufficient to reinstall the device drivers. You can download them from the official website or the installation disc. If everything is in order with the drivers, then you need to look at the "Services" tab in the task manager, where the printer is started, and if it is turned off, then turn it on. Next, you need to check if the printer is used by default, the absence of a tick in items such as "Pause printing" and "Work offline". If the printer is printing over the network, then check the shared access and, accordingly, turn it on if it is turned off. Check the Security tab of your account to see if you are allowed to use the printing function. After all the manipulations, carry out diagnostics using a special installed application. This will kill two birds with one stone: check the functionality of the software and clean the printheads.

• In case of problems with the cartridge, you need to pull it out and insert it back - it is possible that initially you installed it incorrectly. When changing toner or ink, run diagnostics to help not only unclog the nozzles, but also improve print quality. Before buying, carefully study which toner or ink is compatible with your device, do not buy cheap consumables, their quality is not the best.

• In case of problems in the printer's hardware, the best solution would be to contact a service or workshop, as self-repair can cause irreparable damage to your device.

There are some simple rules to follow to keep your Brother printer up and running.

1. Try to use only original cartridges, toner and ink.
2. To prevent ink from drying out, air clogging the print head and malfunctions in the continuous ink supply system, we recommend printing at least once or twice a week, printing several sheets.
3. Pay attention to the expiration date of ink or dry toner.
4. Perform a self-test of the printer periodically - this will help correct some of the system errors.
5. When installing a new cartridge, be sure to remove all restraints and protective tape. This is a fairly common mistake that occurs when you replace the cartridge for the first time.
6. When refilling the cartridge yourself, make sure the ink or toner matches the labeling and series for your printer.
7. Always carefully read the instruction manual of the equipment.

Of course, most printing problems are resolved on their own... But if the printer's self-diagnosis system indicates that everything is in order, you checked the connectors and wires for serviceability, you have correctly installed cartridges, and the printer still does not print, then it is better to contact the specialists at the service center or workshop.

How to reset the counter Brother HL-1110/1510/1810, see below.