Dishwasher technology

The use of modern dishwashers can significantly simplify life and save time spent on washing dishes. It is quite possible to install it in your apartment without the help of specialists.

First you need to know the basic rules for installing dishwashers.

• Connect the device only directly to the socket. Dishwashers consume a lot of electrical energy. Therefore, the use of extension cords may damage the appliance.
• In the process of connecting the machine it is important to ensure that all parts are securely connected to each other.
• When installing the dishwasher, it is important to ensure that so that the gap between the back of the appliance and the kitchen wall is within 5–6 centimeters.
• It is better to choose a place for mounting the machine in advance.... In this case, it will be possible to select a device of a suitable size. In addition, the dishwasher will fit better into the interior of a modern kitchen.

Before starting work, you need to prepare all the necessary tools. The work will need a basic set of things:

• sealant and a gun for him;
• FUM tape;
• pliers;
• hose clamps;
• adjustable wrench;
• set of screwdrivers;
• three-core cable and socket;
• hammer;
• sharp knife.

For your own safety, you need to choose quality gloves for work, as well as a protective rubber apron. The following plumbing elements will also come in handy when installing the machine:

• filter;
• connectors of a suitable diameter;
• ball valve;
• pipes or hoses.

It is also important to check the contents of the dishwasher itself before installation. It is best to do this in the presence of employees of the store where the purchase was made. If not all parts are included, it will be impossible to connect the dishwasher.

There are several options for installing dishwashers.

Tabletop dishwashers are small. They are the easiest to install. Simply attach the drain hose from the machine to the sink and connect it to the mains. This installation option is best suited for a small kitchen. It should be understood that such dishwashers are designed to serve small families.

You can also install the car in the finished kitchen. But the installation process is the most difficult. Before starting work, a novice master will have to prepare a niche for a typewriter. In the process, it is important to consider the dimensions of the selected model.

It is these devices that are the most popular among buyers. Such dishwashers can be installed in any suitable place. The main thing is that it is located next to the sewer. It is also important that a separate moisture-resistant outlet is freely available. You cannot connect the dishwasher through adapters and extension cords.

One of the most difficult parts of installing a machine is working with electrical wiring. It is with him that the process of connecting the device begins.

The first step is to ground the dishwasher. This can be done even while living in a high-rise building. This process has three stages.

• First you need to prepare a three-core copper wire. It must be placed on a wall structure and carefully brought to the electrical panel, which is located on the site. This part must be secured with self-tapping screws.
• The edges of the wire must be carefully stripped. Using self-tapping screws and bolts, it must be fixed to the shield.
• Next, attach the second end of the wire to the back of the dishwasher. Manufacturers indicate the right place with a special sign, which is located on the panel.

In the process of connecting the machine to the mains, it is recommended to use a high-quality multicore cable with copper wires. Such wiring will exactly withstand the power of a modern dishwasher. In addition, it does not deform over time and easily holds the desired shape.

To use the dishwasher without risk to health, you need to connect it to a special moisture-resistant outlet. It is quite simple to install it yourself.

• First you need to find a suitable location for the outlet. A hole of the correct size must be made in the wall.
• Next, you need to determine the location of the groove.
• Using a putty made of water and plaster, the plastic base needs to be fixed in the wall.
• You need to lay a cable in the strobe. The wiring must be fixed to the wall.
• Further, the ends of the cable must be protected from insulation, and the three-core wire must be divided into parts.
• You can proceed to the next stage only by first turning off the electricity in the house.
• The wires must be carefully connected to the contacts.
• After that, all wires that are power supply must be hidden inside the outlet.
• Further, its working part is attached to the base. It is fixed with self-tapping screws.
• After carrying out all these work, you need to screw the socket cover to the base. It must be securely fixed.

Having finished working with electricity, you can proceed to the process of connecting the machine to the water supply. First of all, the master will have to turn off the cold water. Only then can you start connecting the dishwasher.

As a rule, the device is connected to the water supply through the mixer. The dishwasher connection diagram is as follows.

• Carefully disconnect the mixer hose from the pipe outlet.
• Next, you need to fix the brass tee there. First you need to wind the FUM tape on the thread.
• A mixer must be connected to one of the holes, a filter and the edge of the inlet hose to the other. It is recommended to cover the joint with a layer of sealant.

People living in modern buildings will not have problems connecting a dishwasher. The sewer pipes under the sink in such houses are equipped with a standard socket to which the drain line is connected. When installing the machine, this part must be disassembled. In its place, you need to attach a tee. You can buy a suitable part at any hardware store. Tees are sold with rubber gaskets.

Installation of such a part is very simple. The tee is simply pushed all the way into the desired connector. Immediately after that, you can insert the hose from the sink and the hose from the dishwasher into it. If the latter has a plastic plug, it is important not to forget to remove it.

The scheme for connecting a dishwasher drain in an old building looks more complicated, because in such houses the sewer pipes are made of cast iron. It will be difficult for an ordinary person to disassemble the fastening elements of such a sewer. In addition, it is worth remembering that cast iron is a brittle material. This means that you need to work with it especially carefully, trying not to break anything in the process.

Very often it is not possible to directly connect the drain hose to the cast iron structure. In this case, the master has to install a plastic adapter on such a base. It is very important to choose the correct size for such a part.... Before installing it, the cast iron base must be well cleaned of dirt and dried. After that, the adapter is inserted into the inner flange and covered with a thick layer of silicone glue. A drain hose can be inserted into the base prepared in this way.

As a rule, the step-by-step process for starting the dishwasher for the first time is described in the instructions. It consists of five stages.

• First, the car needs to be connected to the network.
• Next, you need to open the water supply tap. There is a small hole on the bottom of the device. It is tightly closed with a cork. This hole needs to be opened. Inside, you need to fill in a special salt to soften the water. The hole must be completely filled with this product.
• After that you need turn on the dishwasher power.
• Powder must be poured into a separate compartment. Instead, you can put a special pill there.
• Having finished with the preparation, it is necessary to tightly close the door of the machine and set it to short operating mode.

After turning off the machine, you need to carefully inspect all the joints. There should be no water droplets on them. It is also important to touch the wiring. It should be slightly hot. If the first start-up went without any problems, the machine can already be used for washing dishes. The test run of the device helps not only to check the reliability of the fastening of the hoses to the siphon and water pipe, but also to rinse the device from the inside.

Separately, it is worth talking about adjusting the height of the dishwasher. Raising or lowering its front legs with your own hands, it is very easy to achieve the correct location of the machine. It is important that it is stable. It depends on how long the device will work. In addition, a securely fixed unit produces less noise.

The advice of experts will help a novice master install a dishwasher on his own.

• The dishwasher is located next to the sink. If done correctly, the device will be easier to connect to the sewer and water supply. In addition, it will also be more convenient to use the machine in this case.
• Embedding a dishwasher in a pencil case or other furniture, a metal plate must be installed under the worktop. This will prevent deformation of the floor covering and also protect it from steam.
• A small tabletop typewriter can be placed on a rubber mat. This will reduce the noise and vibration levels of the device.
• To protect your dishwasher, it's important to install a quality water filter. If possible, it is also worth considering a water softening system. This prevents limescale build-up on the walls of the machine.
• In the process of installing the dishwasher, it is important to follow the step-by-step instructions, after all, different devices may have their own installation features.
• It is not recommended to connect the machine to the boiler. The water heater will still turn on when the device is turned on. Therefore, you will not be able to save in this way.
• If installed incorrectly or some time after use, the machine may start to leak. This leads to the appearance of mold in the room, as well as to rotting of the car body and kitchen furniture. The solution to this problem is quite simple. It is enough to determine the place of leakage, and then carefully seal it with a transparent sealant.

For information on how to connect a dishwasher with your own hands, see the next video.