Dishwasher filters

Dishwashers are one of the types of modern household appliances. They can significantly save your time and resources, as well as remove routine from your life. Such a device washes dishes much better and more efficiently than a human.

As with any equipment, dishwashers need to be looked after. Most of the models have a water softening system. This allows you to remove scale, improves the quality of dishwashing. Water softening occurs thanks to built-in filters, which will be discussed in the article.

The dishwasher offers a new level of comfort and time savings. However, when water is supplied to the unit, the latter contains a large amount of all kinds of impurities that pollute the equipment. A filter is a special purifying device designed for chemical or mechanical water purification from a variety of harmful compounds.

Filters are specially designed to make dishwashers unusable less often. After all, some of the breakdowns are due to poor quality and bad tap water.

And there is also a mechanical cleaning filter that blocks the passage of impurities, sand and various debris through the pipes.

As a result, your household appliances will break down significantly less, become less covered with limescale, and the filter in the dishwasher itself will need to be cleaned less frequently.

There are many different types of cleaning filters currently on the market. It is polyphosphate, main, flow, additional and self-cleaning. And also there is a device with ion-exchange material. In this case, water softening occurs with the help of a special salt.

The polyphosphate cleaning element is a container with sodium polyphosphate crystals. When water passes through them, it changes its properties and becomes softer. It can be coarse or fine.

There are also filters with a magnetic principle of operation.

They are more effective. This element can be used in dishwashers and piping.

The main filter is installed directly into the water supply system.

The self-cleaning flush filter is designed for mechanical water purification from various impurities such as rust or dirt. Its advantages are that it is resistant to corrosion and temperature extremes.

One of the criteria by which a particular dishwasher filter is selected for a machine is the degree of contamination of the water. The type of filter needed depends on the chemical composition of the water and how contaminated it is with various impurities. For example, if the water is too hard and contains a lot of calcium and magnesium bicarbonates, you will need a filter to soften it.

If the water contains a lot of impurities, then a coarse filter is needed.

In order to choose the right product, you must first make a chemical analysis of water in order to understand what harmful impurities it contains.

Another option is to use gauges or test strips to measure a range of water parameters. Less accurate, but cheaper.

And you should also choose brands of original filters for better quality and operation.

It is very easy to install a new cleaning device yourself. To do this, you just need a wrench.... If we change the filter, which is responsible for cleaning the incoming water, then first we must disconnect the inlet hose. The cleaner should be placed in front of it.

The installation diagram is as follows. First we shut off the water, then unscrew the hose. Next, we attach a filter, and there is already a drain hose to it. You can now turn on your dishwasher.

If we change the filter that is inside the dishwasher and is responsible for purifying the water that is drained after washing the dishes, then here we need to look at the bottom of the washing chamber. It is located in the center and can be easily twisted or removed.

For a long and reliable operation of any equipment, including dishwashers, the conditions of correct operation must be observed. All of the above applies to filters as well. After all, they often need to clean.

Any dishwasher has two cleaning elements, a filling and a drain. The drain filter is also called "trash", as it retains all the debris from the dishes.

It clogs up quite often, sometimes it needs to be washed from fat.

In general, it is recommended to clean this filter twice a month. Some vehicle manufacturers install a self-cleaning drain filter for easier operation.

If you do not clean the drain filter for a long time, the water will drain slowly. In this case, part of the water, in general, can remain in the dishwasher, which can lead to negative consequences. And also, due to a clogged filter, stains may remain on the dishes. And inside the equipment, an unpleasant odor may appear.

Many manufacturers place the filter in approximately one location. To find it, you need to remove all the baskets. At the bottom of the chamber, it will be exactly he, similar to a glass. Before starting cleaning, turn off the equipment from the network. Then the filter is disassembled and washed, sometimes soaked in water if there is too much dirt.

The water intake filter gets clogged much less frequently. To clean it, you must first disconnect the unit from the mains and turn off the water supply. Then we remove the water intake hose, and take out the filter to clean it.

After that, we rinse it very well under running water. If necessary, to clean the mesh, use a cleaning brush and detergent.

Then we connect all the parts in reverse order.