Resetting a program in Bosch dishwashers

Sooner or later, any technique fails, but the reasons may be completely different. Bosch dishwashers are no exception. Despite the high build quality and innovative technologies, German equipment also sometimes refuses to work fully, but thanks to the built-in diagnostic system, the user can identify and solve the problem in a timely manner. As a rule, any minor repairs and reprogramming of a household unit is accompanied by a reset of all settings, and the further functionality of the dishwasher depends on how correctly it is performed.

Malfunctions of the dishwasher can lead to the fact that it begins to wash or rinse the dishes of poor quality, increase the consumption of resources, and change the cycle time.

You can prevent such an outcome by performing a home appliance reset yourself, which is performed in two ways.

• Complete disconnection of the dishwasher from the power supply for 20 minutes. This time is sufficient to restart the electronic module of the device.

• Pressing and holding for 10-20 seconds the "Start / Enable" button. This is also enough to reset and reboot the device.

However, such an algorithm of actions is appropriate if the cause is clearly defined and the error is deciphered, which is displayed on the machine display. Otherwise, a factory reset will be required.

As practice shows, the list of the most common reasons for refusing to fully operate the device includes:

• failure of the electronics module;

• stop and crash of the current program;

• clogged filters and hose;

• incorrect position of the water supply and drain hose;

• lack of water supply in the system;

• sewer blockage.

All of the above problems can be easily eliminated by restarting, but there are problems that require more serious manipulation. These include:

• failure of the pump;

• breakage of sensors;

• automatic activation of protective programs, for example, AquaStop, which signals possible leaks in the dishwasher.

If resetting the settings and restarting the unit does not restore the full functionality of the dishwasher, then professional diagnostics and specialist help will be required.

To correctly reset the settings to the factory settings, get rid of all the errors that have gathered on the dishwasher display, it is enough to carry out a number of manipulations, strictly adhering to the sequence. So, the algorithm for resetting the program in Bosch dishwashers includes:

• opening the car door;

• pressing the start key;

• simultaneous inclusion and holding of the buttons responsible for starting 1 and 3 programs;

• closing and re-opening the door;

• pressing and holding the Reset button for 5 seconds;

• closing the door and waiting for the end of the wash cycle - the end is signaled by a lighted indicator;

• opening the door, and completely disconnecting the device from the mains.

All of the above manipulations will allow the dishwasher to reboot and delete all error codes from memory, that is, return to the factory settings.

Compliance with basic preventive measures can prevent malfunctions and malfunctions in the dishwasher.

• Regular temperature control of the water that enters the machine. For Bosch dishwashers, this figure is in the range of 50-60 degrees.

• Continuous cleaning of filters and rocker arms that spray water, as well as sewer and water hoses.

• Control of all detergents that must be added in the quantities provided by the device. In addition, do not neglect the use of additional care products for the device.

• Use of the unit strictly in accordance with the attached instructions. This also includes loading the dishes correctly.

• Selection of suitable detergents that match the programs and options of the machine. An incorrectly selected detergent can negatively affect the quality of washing, as well as lead to damage to the dishwasher. You should be especially careful when choosing 3-in-1 or 5-in-1 tablets, since not every dishwasher is designed to use this type of detergent.

• Correct electrical connection. The safest is to connect through a voltage stabilizer, which will protect against surges and other power failures, which are often the cause of breakdown of household appliances.

In addition, do not forget that after each use of the machine it is necessary to ventilate it by leaving the door open for 20-30 minutes. This will prevent the appearance of unpleasant odors inside the hopper, as well as protect against the formation of microbes and corrosive processes.