Installing Bosch dishwashers

Dishwashers have become part of everyday life. Thanks to their use, free time and water consumption are saved. These household appliances help to wash dishes with high quality, even heavily soiled ones, which will be appreciated by any person who is faced with the need to wash dirty dishes.

In order to make the right choice when purchasing a Bosch dishwasher, you first need to evaluate the parameters of the room and the possibilities for convenient placement of this household appliance. Currently, there is a choice of floor-standing or table-top dishwasher models.

Bosch tabletop dishwashers take up little space. However, when choosing such a model, it must be borne in mind that the machine will be located on a useful area of ​​the working surface of the countertop, as a result of which there will be much less space for cooking. In addition, household appliances are divided into free-standing and built-in models.

Most often, preference is given to installing the dishwasher under the countertop in the immediate vicinity of water and sewer pipes. The closer the equipment is to these systems, the easier and faster the installation will be.

If the dishwasher is located under or above other appliances, it is necessary to take into account the information contained in the instructions for household appliances, which describes possible combinations of the location of various units. When choosing dishwashers, it is worth avoiding location near heating appliances, since the radiated heat negatively affects the performance of the washing machine.

To connect a Bosch dishwasher, they usually call a specialist, but if you wish, it is quite possible to cope with this task yourself. Installation of a dishwasher of this particular company does not fundamentally differ from the installation of equipment from other companies.

In order to simplify the installation process, detailed recommendations and diagrams are presented in the instructions supplied with the dishwasher. But it must be remembered that in the event of a breakdown of equipment due to improper connection, the consumer may be deprived of warranty service.

During installation, it is worth taking care that the front panel of the device is located as conveniently as possible for controlling the unit. Otherwise, the frequent use of the technique will be accompanied by certain discomfort.

To properly connect the dishwasher with your own hands, you must follow the order and stages of work:

• checking the presence and integrity of the mounting kit;
• installation of the purchased household appliance in a pre-selected place;
• connecting a new dishwasher to the sewage system;
• connecting the machine to the water supply;
• providing connection to the electrical network.

To connect the dishwasher to the sewer, a drain hose is used, which can be corrugated or smooth. The advantage of the smooth version is that it is less dirty, while the corrugated one bends well. The drain hose may be included with the mounting kit, but some models are not equipped with it. In this case, you will have to purchase it separately.

To ensure maximum effect and to protect against leaks and flooding in the future, it is worth using a siphon. It will also help get rid of the unpleasant odor. It is recommended to apply a bend in the form of a loop at a height of about 40-50 centimeters from the floor to prevent backflow of water. And also you need to worry about ensuring the tightness of the connection. In this case, it is worth abandoning the use of sealants, since if it is necessary to replace parts, all equipment will have to be completely removed. It is better to give preference to clamps, they pull the hose evenly around the entire circumference.

When connecting the water supply, it is initially required to read the instructions, since it indicates the required water temperature. As a rule, it should not be warmer than +25 degrees Celsius. This indicates that the equipment independently heats the water, therefore, it is required to connect the unit to a cold water source.

However, some products provide for double connection - simultaneously to cold and hot water. Nevertheless, most experts prefer connecting exclusively to cold water. There are several reasons for this:

• hot water supply is not always equipped with a filtration system, which leads to poor water quality;
• hot water is often turned off, sometimes prevention can take about a month;
• the use of hot water can be more expensive than the electricity used to perform cold heating.

To provide power to a Bosch dishwasher, you must have at least minimal skills in performing certain electrical work. Household appliances are connected to an alternating current network within 220-240 V. In this case, a properly installed socket must be present with the obligatory presence of a grounding wire. The socket must be positioned in such a way that easy access to it is ensured. If the power connector is inaccessible, a fully pole disconnecting device must be used, with a contact hole larger than 3 mm, in accordance with safety regulations.

If you need to lengthen the power cord to connect a new dishwasher, then it must be purchased exclusively from specialized service centers. And for safety reasons, all Bosch dishwashers are protected against electrical overload. This is accomplished by a safety device located in the power board. It is located at the base of the power cord in a special plastic case.

Bosch dishwashing machines are very versatile. Despite their differences, the installation steps are practically the same. All dishwashers have the same characteristics, whether they are built-in or free-standing. Built-in models allow you to place household appliances without violating the design of the kitchen. Such models, correctly selected according to their parameters, fit perfectly into the kitchen set. They are not visible at first glance, since the kitchen furniture completely covers the front panel of the appliance.

Freestanding cars are chosen by owners of spacious kitchens. The consumer always has the opportunity to position the unit in the most convenient place, while there is no need to focus on the size of the kitchen furniture.For small-sized premises, it is worth purchasing and connecting compact dishwashers. They do not take up much space, but at the same time they perfectly fulfill their main functional duty - to keep the dishes clean without significant effort.

After completing all installation work, it is required to set up household appliances. It is necessary to check the correctness of the connection to the electrical network. It is important that the appliance door is correctly adjusted, it must close tightly. Adjusting the door prevents water leaks and flooding. Before starting the machine for the first time, it is necessary to set the type of detergent to be used in the program of the machine. The same goes for the rinse aid used. Then it is necessary to place the dishes on the shelves in the various compartments of the unit.

If the installation has been done correctly, then when you close the door, select the required program and turn on the household appliances, the machine will start cleaning the loaded dishes. And also you need to check and configure other functions: timer, incomplete load, and others. After the end of the program, hot steam should be emitted once when the door is opened. If the emissions are repeated, then this indicates an incorrect installation.

In order to avoid any mistakes during the installation process, it is very important to carefully study the instructions for the purchased household appliance. If you have any doubts about the correct installation, it is better to contact a specialized service center for help. It is necessary to ensure that the electrical cord from the machine does not overheat, which can lead to melting of the insulation and cause a short circuit.

The dishwashing machine must not be placed too close to the wall. This arrangement can lead to pinching of the water supply and drain hoses. The minimum distance to the wall should be at least 5-7 centimeters.

Do not use flax to seal the threads when connecting to water supply and sewage. If you take too much flax, then when it swells, the union nut may burst, causing a leak. It is more advisable to use a fum tape or a rubber factory gasket.

An incorrectly installed and incorrectly connected Bosch dishwasher will not function properly, which will lead to negative consequences. If you cannot correct the mistakes made when connecting, you need to contact a professional technician for help. Bosch dishwashers help make life easier and more comfortable. This is a reliable and durable technique, and a variety of models allows you to choose the best option.

In the next video, you will see the installation of the Bosch SilencePlus SPV25CX01R dishwasher under the countertop.