Overview of buildings in the form of a hut
Buildings in the form of a hut (A-shaped buildings) are an incredibly interesting and unusual design solution. Buildings of this nature create an atmosphere of a cozy, laconic West. They can be used not only as a temporary room or a summer cottage, but also as a full-fledged house, even with two floors. Despite the fact that outwardly it looks rather miniature, there is more than enough space inside.
Advantages and disadvantages
Buildings of this type are certainly very beautiful. But they also have both positive and negative sides.
Pros.
- The facade, unusual for Russia, looks very stylish. Such a structure will delight your eyes and surprise your friends and neighbors.
- The appearance will fit into absolutely any landscape.
- The compact form does not take up much space. Does not cast a shadow on the local area - it is perfect as a summer cottage, it will not complicate the cultivation of crops.
- The frame construction is straightforward. It is quite simple and quick to build it yourself, because you don't have to build walls separately
- All precipitation will simply run off / roll down the roof. You will not bother yourself with removing snow from the roof, and in spring-summer-autumn the rain will not "drum" on it.
Minuses.
- Because of the A-shaped tapering walls, the space is "eaten up".
- In such a house, it can be dark if the windows are not properly designed. It is important to make panoramic windows that face south, as well as dormers.
- Independently, in a building in the form of a hut, it will not be easy to correctly think over the internal layout: where is it better to place the stairs, which side to make the door on, is it worth delimiting the area on the 1st floor, etc.
- Difficulty installing a heating system, low frost resistance. Due to the construction, the walls a priori cannot be thick.
What can you build?
A building of this form is suitable literally for anything: it can be used for a bath, and for a gazebo, and for an outdoor country toilet, and for an ordinary house for permanent residence. Most often, A-shaped buildings can be found in resorts, recreation centers, which additionally attracts the attention of visitors.
The easiest way is to build a gazebo. It does not require additional reinforcement, doors, windows.
It is not necessary to do too high a height, since it is not advisable for a gazebo. The triangular shape of the building will reliably protect you from precipitation and wind, from the sun.
It will not take up much space and will not cast a shadow on the adjacent beds and garden beds. In such a cozy hideaway, it is pleasant to dine or drink tea, wrapped in a blanket on a cool evening.
As for the country street toilet, in terms of design, it has almost the same advantages. Design and construction are fast enough and inexpensive. But it should be borne in mind that it is necessary to make at least a small window or leave just an unglazed hole so that it is not dark inside.
For a bath, it is better to give preference to wooden materials. This is both environmentally friendly and creates the feeling of a real Russian bath. Options should be chosen based on your own preferences. It is important to take into account that the structure must be heat-resistant, moisture-resistant. Consideration should also be given to fire resistance.
A residential building in the form of a hut is an ideal alternative for creative people. This is, first of all, individuality. Here you will find inspiration, fill with energy.In such a house, every detail seems aesthetically pleasing.
Perhaps you will experience some difficulties with the installation of heating systems, but they can be easily solved with the help of competent specialists.
Also, the layout of houses for permanent residence is much more complicated than the layout of summer cottages. She must take into account all the needs of the family, the nuances in the placement of furniture, etc.
The main stages of construction
The simple design of A-shaped houses allows you to build them in the country with your own hands, detailed drawings are presented below. The main thing is to develop the layout correctly.
- Construction planning, as in the classic version, you need to start with the choice of materials. The frame, as a rule, is mounted in wood. But the roofing can be made of absolutely any suitable material: from corrugated board, tiles (it is better not to take metal tiles, because it has zero sound insulation, and every impact on the roof will be reflected inside the room), slate, bitumen or the same tree. By the way, from a design point of view, it is better to choose a contrasting roof - this will make the house even more interesting.
- It is necessary to start work step by step, with the preparation of the foundation. You need to choose a suitable piece of land, clear it and designate the estimated area. It is customary to install the foundation columnar or pile.
- The frame consists of ordinary wooden beams of the required size, folded in the shape of the letter A and connected at a certain angle. These are all collected separately on the ground. The necessary, pre-calculated number of such corners is made. Internal partitions are assembled and installed in a similar way. Then, according to the following scheme, the assembled beams are installed on the foundation at exactly the same intervals: first, the extreme corners, after them - the middle ones. If necessary, a load-bearing floor is installed to separate the floors.
- The next step is the construction of the roof. The frame is sheathed on top either with wood or with panels of the selected material. It would be optimal to use corrugated board in terms of wear resistance and durability, but it heats up a lot in the sun and is prone to rust, since this is a typical metal.
- After installing the external facade, you can do the interior landscaping and interior design. It is also advisable to sheathe the house with wood from the inside. It is both beautiful and heat-resistant material. Before that, you can use any heat and sound insulation panels. The installed boards are primed and varnished. If the house is two-story, it is important to correctly position the staircase - it should delimit the space into different zones, for example, the kitchen and the living room. Or it could be shifted to the far end and just rest against the wall that insulates the bathroom.
- After the walls, it is natural to start installing window frames. The more they are, the better. This will visually expand the space. It is also important to make panoramic windows in the entire wall facing south.
- Then it's time to finish the floor. Moreover, it should be remembered that under the flooring there must be a layer with waterproofing and insulation.
- The interior can be done in any style, but when arranging details, do not use things that "hide" the space. The color scheme can be either muted (if you chose the option with panoramic windows) or light (it will be an alternative if natural light was not enough). The key role in such a house is given to zoning - it is thanks to him that it will be possible to distribute the compact space with intelligence and comfort.
Beautiful examples
Designers have been engaged in such buildings for a long time. They have developed many design options, some of which can be seen below.
You can learn more about the features of the construction and operation of a house in the form of a hut from the following video.
The comment was sent successfully.